I done everithing you said, u used your boot and f_loade with 65 05 setting, it writes and everithing seem ok on the screen...<br />But phone wont start, then i read out eprom and compared it with original eprom and it is compleatly diferent....<br />The data is corrupted.... Instead of "eeprom" is stays just "prom" etc...
I will send you my backup, but backup is ok...<br />I used NFREE 1.2 on backup & everithing seems to be ok, all checksum but one (eprom 2 chksum) are ok. I presume this is because of the compatibiliti of the program & 3330 (but you probably know beter than me abouth that <img src="smile.gif" border="0"> )<br />And when i compare with other backup from the net (from 200000 to 400000) they match...i dont have a backup to 5E0000 so i cant say that they are same to the eprom area...<br /> <br />When I write back my backup (with f_loader you gave me and 65 05).... and then read it again... these two files compared in HexWorkshop dont match... The flash.out is corupted, it has data (not FF) but the data is invalid...<br /> <br />So I think that the reading is ok but writing is wrong...<br /> <br />I have a similar but reversed problem with reading 6210 (writing with intel16 is ok but reading with normal is bad)...<br />But with 3310 i have no problems...<br /> <br />Can it be that is something with hardware?<br />Or just the loaders and setings dont work for me?