E510F doesn't write dump Please check the log, and there's no rcp file for e510, only full dump in shell.
Connecting to Target...
JTAG device: MSM7227T
CPU IDCODE : 0x503C00E1 Mfg.: 0x070, Part: 0x03c0, Ver.: 0x5
CPU Manufacturer: QUALCOMM , CPU Name: MSM7227T
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting nand memory parameters ...
NAND flash device ID:002C:00BC 'NAND 512MB 1.8V 16-bit (Micron)' found
NAND geometry: Blocks:00001000, Page size:2048 bytes , Block size:64 pages
Writing memory from file...C:\Users\Lunno\Desktop\512_MB_DUMP_WITH_IME I_444444444444444.bin
embeddedice handshake timeout
Timeout Error while reading approx : 0x00000100 bytes over DCC
Unknown DCC answer /PROTOCOL/
Failed writing file C:/Users/Lunno/Desktop/512_MB_DUMP_WITH_IMEI_444444444444444.bin to NAND flash 1 at offset 0x00110000 code# |