View Single Post
Old 11-27-2013, 09:43   #12 (permalink)
Aamir_Zia
No Life Poster
 
Aamir_Zia's Avatar
 
Join Date: Dec 2003
Location: Karachi Pakistan
Age: 38
Posts: 6,770
Member: 47321
Status: Offline
Sonork: 100.54032
Thanks Meter: 497
Welcome to Octoplus/Octopus Box Samsung software version 1.4.0
-----------------------------------------------------------------------------------
To connect SHV-E110S phone you have to perform the following steps:
1. Go to dial window.
2. Enter "319712358" number.
3. Enter "774632" password.
4. Go to System->SIO mode.
5. Select "Modem" radio button for USB section.
6. Go to dial window.
7. Enter "*#7284#" number.
8. Set "Diag config" to "USB" value.
9. Restart phone.
10. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SGH-I727 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SGH-I727
To put SGH-I727 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Power" buttons.
Repairing EFS...
Searching for a phone. Please wait...
Phone found
EFS Repair successfully
-----------------------------------------------------------------------------------
To connect SHV-E110S phone you have to perform the following steps:
1. Go to dial window.
2. Enter "319712358" number.
3. Enter "774632" password.
4. Go to System->SIO mode.
5. Select "Modem" radio button for USB section.
6. Go to dial window.
7. Enter "*#7284#" number.
8. Set "Diag config" to "USB" value.
9. Restart phone.
10. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM1
Selected model: SHV-E110S
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM118
Phone connection failed
No diagnostic ports found!
Connecting to phone on COM49
Phone connection failed
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM1
Selected model: SHV-E110S
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM118
Phone connection failed
No diagnostic ports found!
Connecting to phone on COM49
Phone connection failed
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM1
Selected model: SHV-E110S
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM120
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM1
Selected model: SHV-E110S
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM120
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM120
Selected model: SHV-E110S
Mode: Normal
Phone model: SCAQCSZQ
Phone model is not supported
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM120
Phone connection failed
Connecting to phone on COM118
Port is busy
Connecting to phone on COM119
Port is busy
No diagnostic ports found!
Connecting to phone on COM49
Phone connection failed
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM120
Selected model: 707SC
Mode: Normal
Phone model: SCAQCSZQ
Phone model is not supported
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM120
Mode: Normal
Phone model: SCAQCSZQ
Phone model is not supported
Phone connection failed
Connecting to phone on COM118
Phone connection failed
Connecting to phone on COM119
Mode: Normal
Phone model: AAABQOCZ
Phone model is not supported
Phone connection failed
No diagnostic ports found!
Connecting to phone on COM49
Phone connection failed
-----------------------------------------------------------------------------------
To connect SGH-I727 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM120
Selected model: SGH-I727
Mode: Normal
Phone model: SCAQCSZQ
Phone model is not supported
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM120
Mode: Normal
Phone model: SCAQCSZQ
Phone model is not supported
Phone connection failed
Connecting to phone on COM118
Phone connection failed
Connecting to phone on COM119
Mode: Normal
Phone model: AAABQOCZ
Phone model is not supported
Phone connection failed
No diagnostic ports found!
Connecting to phone on COM49
Phone connection failed
-----------------------------------------------------------------------------------
To connect SGH-I727 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SGH-I727
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM120
Mode: Normal
Phone model: SCAQCSZQ
Phone model is not supported
Phone connection failed
Connecting to phone on COM118
Phone connection failed
Connecting to phone on COM119
Mode: Normal
Phone model: AAABQOCZ
Phone model is not supported
Phone connection failed
No diagnostic ports found!
Connecting to phone on COM49
Phone connection failed
-----------------------------------------------------------------------------------
To connect SHV-E110S phone you have to perform the following steps:
1. Go to dial window.
2. Enter "319712358" number.
3. Enter "774632" password.
4. Go to System->SIO mode.
5. Select "Modem" radio button for USB section.
6. Go to dial window.
7. Enter "*#7284#" number.
8. Set "Diag config" to "USB" value.
9. Restart phone.
10. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM1
Selected model: SHV-E110S
Mode: Emergency
NVM can’t be repaired for SHV-E110S phone in emergency mode
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM1
Selected model: SHV-E110S
Mode: Emergency
NVM can’t be repaired for SHV-E110S phone in emergency mode
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM49
Selected model: SHV-E110S
Phone was not found on the selected port!
Selected action can’t be performed
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM97
Selected model: SHV-E110S
Port is busy
Phone was not found on the selected port!
Selected action can’t be performed
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM37
Selected model: SHV-E110S
Port is busy
Phone was not found on the selected port!
Selected action can’t be performed
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM37
Selected model: SHV-E110S
Port is busy
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM36
Selected model: SHV-E110S
Port is busy
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM120
Selected model: SHV-E110S
Mode: Normal
Phone model: SCAQCSZQ
Warning: Selected model (SHV-E110S) differs from the detected one
(SCAQCSZQ)!
Firmware compiled date: Sep 02 2011
Firmware compiled time: 00:00:00
Firmware released date: Apr 18 2012
Firmware released time: 16:05:46
Phone IMEI: 000000-00-000000-0
WiFi MAC: 00:00:00:00:00:00
SW Version: M9200B-SCAQCSZD-3.4.501036
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM120
Selected model: SHV-E110S
Mode: Normal
Phone model: SCAQCSZQ
Warning: Selected model (SHV-E110S) differs from the detected one
(SCAQCSZQ)!
Firmware compiled date: Sep 02 2011
Firmware compiled time: 00:00:00
Firmware released date: Apr 18 2012
Firmware released time: 16:05:46
Phone IMEI: 000000-00-000000-0
WiFi MAC: 00:00:00:00:00:00
SW Version: M9200B-SCAQCSZD-3.4.501036
Creating NVM backup
Reading NVM done!
Repairing NVM for SHV-E110S phone...
NVM repair completed successfully
Please, restart the phone to apply changes
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM120
Selected model: SHV-E110S
Port is busy
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM36
Selected model: SHV-E110S
Port is busy
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM37
Selected model: SHV-E110S
Port is busy
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM36
Selected model: SHV-E110S
Port is busy
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM36
Selected model: SHV-E110S
Port is busy
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM36
Selected model: SHV-E110S
Port is busy
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM120
Mode: Normal
Phone model: SCAQCSZQ
Phone model is not supported
Phone connection failed
Connecting to phone on COM118
Phone connection failed
Connecting to phone on COM119
Mode: Normal
Phone model: AAABQOCZ
Phone model is not supported
Phone connection failed
No diagnostic ports found!
Connecting to phone on COM49
Phone connection failed
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM36
Selected model: 707SC
Port is busy
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
To connect SHV-E110S phone you have to perform the following steps:
1. Go to dial window.
2. Enter "319712358" number.
3. Enter "774632" password.
4. Go to System->SIO mode.
5. Select "Modem" radio button for USB section.
6. Go to dial window.
7. Enter "*#7284#" number.
8. Set "Diag config" to "USB" value.
9. Restart phone.
10. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM36
Selected model: SHV-E110S
Port is busy
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM37
Selected model: SHV-E110S
Port is busy
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM49
Selected model: SHV-E110S
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM97
Selected model: SHV-E110S
Port is busy
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM36
Selected model: SHV-E110S
Port is busy
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM37
Selected model: SHV-E110S
Port is busy
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM49
Selected model: SHV-E110S
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM97
Selected model: SHV-E110S
Port is busy
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM118
Selected model: SHV-E110S
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM119
Selected model: SHV-E110S
Mode: Normal
Phone model: AAABQOCZ
Warning: Selected model (SHV-E110S) differs from the detected one
(AAABQOCZ)!
Firmware compiled date: Sep 01 2011
Firmware compiled time: 23:00:00
Firmware released date: Dec 21 2011
Firmware released time: 11:39:17
Incorrect IMEI
Can't read WiFi MAC address
SW Version: M8260A-AABQOCZM-3.0.552040T
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM119
Selected model: SHV-E110S
Mode: Normal
Phone model: AAABQOCZ
Warning: Selected model (SHV-E110S) differs from the detected one
(AAABQOCZ)!
Firmware compiled date: Sep 01 2011
Firmware compiled time: 23:00:00
Firmware released date: Dec 21 2011
Firmware released time: 11:39:17
Incorrect IMEI
Can't read WiFi MAC address
SW Version: M8260A-AABQOCZM-3.0.552040T
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM119
Selected model: SHV-E110S
Mode: Normal
Phone model: AAABQOCZ
Warning: Selected model (SHV-E110S) differs from the detected one
(AAABQOCZ)!
Firmware compiled date: Sep 01 2011
Firmware compiled time: 23:00:00
Firmware released date: Dec 21 2011
Firmware released time: 11:39:17
Incorrect IMEI
Can't read WiFi MAC address
SW Version: M8260A-AABQOCZM-3.0.552040T
Old WiFi MAC value:
New WiFi MAC value: 35:73:46:65:78:31
Writing new WiFi MAC address ...
Failed to write new WiFi MAC address
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM119
Selected model: SHV-E110S
Mode: Normal
Phone model: AAABQOCZ
Warning: Selected model (SHV-E110S) differs from the detected one
(AAABQOCZ)!
Firmware compiled date: Sep 01 2011
Firmware compiled time: 23:00:00
Firmware released date: Dec 21 2011
Firmware released time: 11:39:17
Incorrect IMEI
Can't read WiFi MAC address
SW Version: M8260A-AABQOCZM-3.0.552040T
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM119
Selected model: SHV-E110S
Mode: Normal
Phone model: AAABQOCZ
Warning: Selected model (SHV-E110S) differs from the detected one
(AAABQOCZ)!
Firmware compiled date: Sep 01 2011
Firmware compiled time: 23:00:00
Firmware released date: Dec 21 2011
Firmware released time: 11:39:17
Incorrect IMEI
Can't read WiFi MAC address
SW Version: M8260A-AABQOCZM-3.0.552040T
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM119
Selected model: SHV-E110S
Mode: Normal
Phone model: AAABQOCZ
Warning: Selected model (SHV-E110S) differs from the detected one
(AAABQOCZ)!
Firmware compiled date: Sep 01 2011
Firmware compiled time: 23:00:00
Firmware released date: Dec 21 2011
Firmware released time: 11:39:17
Incorrect IMEI
Can't read WiFi MAC address
SW Version: M8260A-AABQOCZM-3.0.552040T
Creating NVM backup
Reading NVM done!
Repairing NVM for SHV-E110S phone...
Writing NVM failed
NVM repair completed successfully
Phone will restart now
-----------------------------------------------------------------------------------
To connect SGH-I727 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SGH-I727R phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SGH-I727R
Phone was not found on the selected port!
To put SGH-I727R phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Power" buttons.
Repairing EFS...
Searching for a phone. Please wait...
Phone found
EFS Repair successfully
  Reply With Quote
 
Page generated in 0.13402 seconds with 7 queries