When using the I535 resurector I receive this error:
Code:
[02-12-2013 01:42:22] Open serial port...OK
[02-12-2013 01:42:22] Connecting to the RIFF Box...OK
[02-12-2013 01:42:22] Firmware Version: 1.37, JTAG Manager Version: 1.55
[02-12-2013 01:42:22] Selected Resurrector: [Samsung I535 V1.0.4899.12662]
[02-12-2013 01:42:22]
[02-12-2013 01:42:22] Connecting to the dead body...OK
[02-12-2013 01:42:22] Detected dead body ID: 0x406B10E1 - CORRECT!
[02-12-2013 01:42:22] Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
[02-12-2013 01:42:22] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[02-12-2013 01:42:22]
[02-12-2013 01:42:22] Resurrection sequence started.
[02-12-2013 01:42:22] Establish communication with the phone...OK
[02-12-2013 01:42:22] Initializing internal hardware configuration...OK
[02-12-2013 01:42:22] Uploading resurrector data into memory...OK
[02-12-2013 01:42:22] Starting communication with resurrector...OK
[02-12-2013 01:42:22]
[02-12-2013 01:42:22] Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (MBG8FB, 0x000747C00000 Bytes = 29.12 GB)
[02-12-2013 01:42:22] Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (MBG8FB, 0x000000200000 Bytes = 2.00 MB)
[02-12-2013 01:42:22]
[02-12-2013 01:42:22] ERROR: No Resurrection Data is available for the eMMC Chip with Capacity = 29,12GB
I understand this error is because the DLL is for the 16Gb version, but how can I repair the boot of the 32Gb? is there a flash dump that I can use?
Regards