| Freak Poster
Join Date: Feb 2008
Posts: 359
Member: 714291
Status: Offline Thanks Meter: 39 | Nokia lumia n9 flashing error
Hi Best team
I am suffering a lot to flash the nokia lumia N9
It gives error but tried to flash with different upper files no success
here is the log:
Connect phone on selected interface...
Check : Processing 3290ADCC_DFL61_HARMATTAN_40.2012.21-3.480.04.1_PR_LEGACY_480_ARM_RM-696_PRD_signed.bin
==========
FW APE version : 40.2012.21-3.480.04.1
FW CMT version : 9.2.2011.51
FW PRx release : PR_1.3
FW Region info : BRANDED TO CARRIER
FW Region ver : 480
KERNEL version : 2.6.32-20121301+0m8
==========
Check : File Is Ok !
Core : v1.76 , Tablet FlashEngine : v4.5
Insert cable in to powered OFF phone! (Ignore if phone Connected)
Waiting for NOLO...
Connect in NOLO mode Ok!
Phone Info :
Type : RM-696 , HWRev : 1603
NOLO : 01/06/23
SWVer: DFL61_HARMATTAN_40.2012.21-3.454.6_PR_454
Device mode : Production mode
==========
FW APE version : 40.2012.21-3.454.6
FW PRx release : PR_1.3
FW Region info : BRANDED TO CARRIER
FW Region ver : 454
==========
Read info Ok
=== SW version Check ====
Ok [Reflashing or Upgrade]
=== SW version Check ====
Processing APE Boot...
File : 3290ADCC_DFL61_HARMATTAN_40.2012.21-3.480.04.1_PR_LEGACY_480_ARM_RM-696_PRD_signed.bin
Processing : ape-algo
APE Algorithm boot Ok
Reopening the connection...
MKII mode init Ok
Device : RM-696
HW build : 1603
Bat.level : 100
SW release : (empty)
Protocol : 108
UPDAPP ver : 1.7.2
Upd/Dev PT : 3 , 3
FL_images : cert-sw,xloader,secondary,rootfs,kernel,moslo,config,mm c,tar,cmt-2nd,cmt-algo,cmt-mcusw
Last errors : bb5_rdc_cert_read failed
Code Match Ok
HW match Ok
MKII Set : Host Protocol set to 108
MKII Set : CMT Verify On
MKII Set : Perform RFS On
MKII Set : eMMC preserve On
---Processing MCU image---
Processing File : 3290ADCC_DFL61_HARMATTAN_40.2012.21-3.480.04.1_PR_LEGACY_480_ARM_RM-696_PRD_signed.bin
MKII : Sending config for [cert-sw]
-> Ver T : RM-696
-> Ver H : 1507 , 1508 , 1509 , 1510 , 1601 , 1602 , 1603 , 1604 , 1605 , 1701 , 1702 , 1703 , 1704 , 1705 , 1801 , 1802 , 1803 , 1804 , 1805
MKII : Init pipe 00
MKII : Flashing...
MKII : Finalizing...
cert-sw Flash done
MKII : ERROR_SECURITY! PHONE REPORT DOWNGRADE TRY!
Receiving error list...
Last Errors : bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1354187757)
[Pipe 0] Finishing in error state with status 10
Flashing failed
More info in Last Error Log
Elapsed: 00:00:19
Connect phone on selected interface...
Core : v1.76 , BB5XG FlashEngine : v7.0
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
Flashing phone now...
Rules accepted for : Unknown Generation
Check files done...
-> SWversion check skipped : Dead mode selected
-> Sorry, can't flash it now - please send report to support
Also flashed with this file:
Check : Processing 670D5405_DFL61_HARMATTAN_40.2012.21-3.468.1_PR_LEGACY_468_ARM_RM-696_PRD_signed.bin
==========
FW APE version : 40.2012.21-3.468.1
FW CMT version : 9.2.2011.51
FW PRx release : PR_1.3
FW Region info : BRANDED TO CARRIER
FW Region ver : 468
KERNEL version : 2.6.32-20121301+0m8
==========
Check : File Is Ok !
Core : v1.76 , Tablet FlashEngine : v4.5
Insert cable in to powered OFF phone! (Ignore if phone Connected)
Waiting for NOLO...
Connect in NOLO mode Ok!
Phone Info :
Type : RM-696 , HWRev : 1603
NOLO : 01/06/23
SWVer: DFL61_HARMATTAN_40.2012.21-3.454.6_PR_454
Device mode : Production mode
==========
FW APE version : 40.2012.21-3.454.6
FW PRx release : PR_1.3
FW Region info : BRANDED TO CARRIER
FW Region ver : 454
==========
Read info Ok
=== SW version Check ====
Ok [Reflashing or Upgrade]
=== SW version Check ====
Processing APE Boot...
File : 670D5405_DFL61_HARMATTAN_40.2012.21-3.468.1_PR_LEGACY_468_ARM_RM-696_PRD_signed.bin
Processing : ape-algo
APE Algorithm boot Ok
Reopening the connection...
MKII mode init Ok
Device : RM-696
HW build : 1603
Bat.level : 100
SW release : (empty)
Protocol : 108
UPDAPP ver : 1.7.2
Upd/Dev PT : 3 , 3
FL_images : cert-sw,xloader,secondary,rootfs,kernel,moslo,config,mm c,tar,cmt-2nd,cmt-algo,cmt-mcusw
Last errors : bb5_rdc_cert_read failed
Code Match Ok
HW match Ok
MKII Set : Host Protocol set to 108
MKII Set : CMT Verify On
MKII Set : Perform RFS On
MKII Set : eMMC preserve On
---Processing MCU image---
Processing File : 670D5405_DFL61_HARMATTAN_40.2012.21-3.468.1_PR_LEGACY_468_ARM_RM-696_PRD_signed.bin
MKII : Sending config for [cert-sw]
-> Ver T : RM-696
-> Ver H : 1507 , 1508 , 1509 , 1510 , 1601 , 1602 , 1603 , 1604 , 1605 , 1701 , 1702 , 1703 , 1704 , 1705 , 1801 , 1802 , 1803 , 1804 , 1805
MKII : Init pipe 00
MKII : Flashing...
MKII : Finalizing...
cert-sw Flash done
MKII : ERROR_SECURITY! PHONE REPORT DOWNGRADE TRY!
Receiving error list...
Last Errors : bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1354187757)
[Pipe 0] Finishing in error state with status 10
Flashing failed
More info in Last Error Log
Elapsed: 00:00:13
Connect phone on selected interface...
please best team help me to revive my phone
yuo can give me the link for the appropriate file
Thank you! |