GSM-Forum - View Single Post

mazmaz1 · 12-26-2013, 21:14

Hello
I have a HTC Jetstream with qhsusb_dload state
I jtag it with Riff box and resurrect it,without any change after successful resurrection whit generic resurrection and repairing kernel and htc section repairing too.
Is full dump writing solve this prob?
Any one have any address for full dump file for this model?
this is log of resurrection

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [HTC JetStream (PG0941000) V1.0.4816.55337]

Connecting to the dead body...OK
Detected dead body ID: 0x106A10E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0100 (SEM32G, 0x00076E000000 Bytes = 29.72 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0100 (SEM32G, 0x000000100000 Bytes = 1.00 MB)

Flashing the dead body...OK
Resurrection complete!

12-26-2013, 21:14	#1 (permalink)
mazmaz1 Freak Poster Join Date: Aug 2006 Posts: 477 Member: 339455 Status: Offline Sonork: 100.1589401 Thanks Meter: 86	HTC jetstream QHSUSB_Dload Hello I have a HTC Jetstream with qhsusb_dload state I jtag it with Riff box and resurrect it,without any change after successful resurrection whit generic resurrection and repairing kernel and htc section repairing too. Is full dump writing solve this prob? Any one have any address for full dump file for this model? this is log of resurrection Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.55 Selected Resurrector: [HTC JetStream (PG0941000) V1.0.4816.55337] Connecting to the dead body...OK Detected dead body ID: 0x106A10E1 - CORRECT! Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0100 (SEM32G, 0x00076E000000 Bytes = 29.72 GB) Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0100 (SEM32G, 0x000000100000 Bytes = 1.00 MB) Flashing the dead body...OK Resurrection complete!