Acer A30-A40 MT8163 not supported?

[Deadoc3]

Try to read pattern lock code, this is failed operation log

Waiting For Device Connection...
USB PORT: MediaTek PreLoader USB VCOM (Android) (COM23)
Port: MediaTek PreLoader USB VCOM (Android) (COM23)
Manufacturer: MediaTek Inc.
OPEN COM PORT... OK
Handshake... OK
Waiting for server........ OK
Read CHIP ID... OK
HW-CODE: 0X8163
CPU: MT8163
Read Chip Version... OK
HW-SUBCODE: 0X8A00
HW-VERSION: 0XCB00
SW-VERSION: 0X0001
Read Phone Configuration... OK
Waiting for server........ OK
Switch TO BROM PORT... OK
Wait for brom... OK
Waiting for server........ OK
Bypass Security Protection... OK
Waiting for server........ OK
Dump EMI Config... OK
Send Protection Files BROM... OK
Read CHIP INFO... OK
Setup DEVICE... OK
Init EXT RAM... FAIL
[PORT ERR] READ TIMED OUT

This device is supported for this operation?

[easy-team]

Originally Posted by Deadoc3

Try to read pattern lock code, this is failed operation log



This device is supported for this operation?

Please follow the following steps so that you do not see any error when working on the dongle interface

1-Disable Driver Signature
By following the following video
https://www.youtube.com/watch?v=C9M2l5vp5co

2- Use libusb to delete and filter definitions
****************************/file/ajjbx...2.6.0.rar/file

3- Use UsbDk_1.0.21_x64
****************************/file/6wlst...1_x64.rar/file

4- When the process is not completed, do not repeat the process until after turning on the phone in the normal operating mode, then turning it off again and trying again.

5- For Realme devices, the SPD processor (the Factory Reset {spd} format command is used)
When any error occurs, write a post about the problem, and the team is ready to communicate with you and solve the problem, *** willing

6- Close the interface and restart the process after any error
https://easy-firmware.com/index.php?...BXXa_aL2PKvQ_8