Nokia Lumia 530 RM-1019 Blue Screen Sad Smiley Logo Done With Flash U.A.T - GSM-Forum

shahzadqadri · 10-31-2019, 12:50

Nokia Lumia 530 RM-1019 Blue Screen Sad Smiley Logo Done With Flash U.A.T

Code:

Searching Device

Device Found

Unpacking Firmware .. Please wait ..
Get flashing parameters
Get flashing parameters
Lumia Boot Manager detected
Lumia Boot Manager detected
Check status of battery
Check status of battery
State of charge 67, charging current -240
Detecting UEFI responder
Detecting UEFI responder
Lumia Boot Manager detected
Lumia Boot Manager detected
Check status of battery
Check status of battery
State of charge 67, charging current -240
Booting to FlashApp
Reboot to FlashApp command sent successfully.
Verifying that device is online
Device is online
Device is online
Detecting UEFI responder
Detecting UEFI responder
Lumia Flash detected
Lumia Flash detected
Get flashing parameters
Get flashing parameters
Lumia Flash detected
Lumia Flash detected
Size of one transfer is 2363392
MMOS RAM support: 1
Size of buffer is 2359296
Number of eMMC sectors: 7733248
Platform ID of device: Nokia.MSM8212.P6134.1.1
Async protocol version: 01
Platform secure boot enabled
Platform secure boot enabled
Secure FFU enabled
JTAG eFuse ****n
RDC not found
Authentication not done
UEFI secure boot enabled
UEFI secure boot enabled
SHK enabled
Device supports FFU protocols: 0031
Subblock ID 32
Using secure flash method
CoreProgrammer version 2015.06.10.001.
Start programming signed ffu file C:\Users\Shahbaz\Downloads\Compressed\RM-1019_02074.00000.15234.28004\RM-1019_02074.00000.15234.28004\RM-1019\RM1019_02074.00000.15234.28004_RETAIL_prod_signed_1003_025CAF_000-IN.ffu
Send FlashApp write parameter: 0x4d544f00
Perform handshake with UEFI...
Unknown sub block detected. Skip...
Unknown sub block detected. Skip...
DevicePlatformInfo: Nokia.MSM8212.P6134.1.1
Unknown sub block detected. Skip...
Unknown sub block detected. Skip...
Unknown sub block detected. Skip...
Unknown sub block detected. Skip...
Supported protocol versions bitmap is 31
Secure FFU sync version 1 supported.
Secure FFU sync version 1 supported.
Secure FFU async version 1 supported.
Secure FFU async version 1 supported.
Secure FFU sync version 2 supported.
Secure FFU sync version 2 supported.
Secure FFU async version 2 supported.
Secure FFU async version 2 supported.
Secure FFU async version 3 supported.
Secure FFU async version 3 supported.
CRC header v. 1
CRC align bytes. 4
Get CID of the device...
Get EMMC size of the device...
Emmc size in sectors: 7733248
CID: Toshiba, Size 3776 MB
Security Status:
Platform secure boot is enabled.
Platform secure boot is enabled.
Secure eFUSE is enabled.
JTAG is disabled.
RDC is missing from the device.
RDC is missing from the device.
Authentication is not done.
Authentication is not done.
UEFI secure boot is enabled.
UEFI secure boot is enabled.
Secondary HW key exists.
Get RKH of the device...
RKH of the device is 6DF7F89E7A01F5B5DCB54754545B30B8B036C6BD294ACE42C8B34A7D504D6183
Get ISSW Version...
Get ISSW Version, SKIPPED!
Size of system mem: 524288 KB
Clearing the backup GPT...SKIPPED!
Successfully parsed FFU file. Header size: 0x000c0000, Payload size: 0x0000000051fe0000, Chunk size: 0x00020000, Header offset: 0x00000000, Payload offset: 0x00000000000c0000
RKH match between device and FFU file!
Option: Skip CRC32 check in use
Start sending header data...
Start sending payload data V2Sbl in async mode...
lastDescriptorIndex: 10494 lastLocationIndex: 0
Flashing completed successfully! Status: 0x0001
Payload data transfer speed (8.95 MB/s) Elapsed time 146.58 sec
Payload data size 1311.892822 MB
EMMC write speed: 14139 KB/s
Data verify speed: 44774 KB/s
Factory reset done
Write flash options ( WriteNvi: Full )
Flash options set successfully.