GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Uni-Android Tool - UAT PRO


Reply
 
LinkBack Thread Tools Display Modes
Old 11-30-2022, 06:28   #3916 (permalink)
No Life Poster
 
Join Date: May 2008
Posts: 1,479
Member: 772651
Status: Offline
Thanks Meter: 1,694
Micromax IN 2C E6533 FRP reset done by UAT PRO


Micromax IN 2C E6533 FRP reset done by UAT PRO


Quote:
1. Device must be Power off with battery inside
2. Press and Hold VOl-, or some phones requires press and hold VOl- and VOL+ together
3. Insert usb cable
4. Install spd drivers if needed
====================================

- Connection : Flash Mode
- Brand : Micromax
- Model : Micromax IN 2C E6533
- Process : Reset FRP
====================================

Waiting for device port ...
Port found

Port : [ COM5 : SPRD U2S Diag ]

Handshaking with device ...
Handshake done
Protocol : SPRD3
Detected SoC : Unisoc Tiger T610

Sending config : OK

Sending Boot [UAT PRO.boot1] : DONE
Sending Boot [UAT PRO.boot2] : DONE

BootVersion : Spreadtrum Boot Block version 1.1

Reseting Frp please wait ...
Reset Frp done


UAT PRO : 148.02 | 30 - November - 2022 [ 10:16:11 AM ]

Elapsed Time : 1 minutes 2 seconds
  Reply With Quote
Old 12-08-2022, 06:47   #3917 (permalink)
Product Supporter
 
CHIEF OF GSM's Avatar
 
Join Date: Aug 2017
Location: Islam
Age: 34
Posts: 1,206
Member: 2750997
Status: Offline
Sonork: 100.1678720
Thanks Meter: 1,266
Thumbs up Oppo F9 CPH1823 One Click Screen Lock Reset By Uat Pro

Oppo F9 CPH1823 One Click Screen Lock Reset By Uat Pro







  Reply With Quote
Old 12-08-2022, 06:48   #3918 (permalink)
Product Supporter
 
CHIEF OF GSM's Avatar
 
Join Date: Aug 2017
Location: Islam
Age: 34
Posts: 1,206
Member: 2750997
Status: Offline
Sonork: 100.1678720
Thanks Meter: 1,266
Thumbs up Samsung J730K Frp One Click Reset By Uat Pro

  • Samsung J730K Frp One Click Reset By Uat Pro





  Reply With Quote
Old 12-08-2022, 06:50   #3919 (permalink)
Product Supporter
 
CHIEF OF GSM's Avatar
 
Join Date: Aug 2017
Location: Islam
Age: 34
Posts: 1,206
Member: 2750997
Status: Offline
Sonork: 100.1678720
Thanks Meter: 1,266
Thumbs up Vivo Y91i 1820 One Click Screen Lock Reset By Uat Pro

Vivo Y91i 1820 One Click Screen Lock Reset By Uat Pro




  Reply With Quote
Old 12-08-2022, 06:51   #3920 (permalink)
Product Supporter
 
CHIEF OF GSM's Avatar
 
Join Date: Aug 2017
Location: Islam
Age: 34
Posts: 1,206
Member: 2750997
Status: Offline
Sonork: 100.1678720
Thanks Meter: 1,266
Thumbs up Vivo Y91 One Click Frp Reset By Uat Pro

Vivo Y91 One Click Frp Reset By Uat Pro








  Reply With Quote
Old 12-08-2022, 06:52   #3921 (permalink)
Product Supporter
 
CHIEF OF GSM's Avatar
 
Join Date: Aug 2017
Location: Islam
Age: 34
Posts: 1,206
Member: 2750997
Status: Offline
Sonork: 100.1678720
Thanks Meter: 1,266
Thumbs up Vivo Y93 1814 Pattern Unlock Without Data Loss Via TP By UAT PRO

Vivo Y93 1814 Pattern Unlock Without Data Loss Via TP By UAT PRO





  Reply With Quote
Old 12-10-2022, 07:12   #3922 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 4,574
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 761
HUAWEI JAT-AL29 (Honor 8A) FRP Remove Done By UAT Pro

HUAWEI JAT-AL29 (Honor 8A) FRP Remove Done By UAT Pro

Code:
1. Power off device
2. Remove Install battery if needed
3. Connect USB cable to powered off device
4. For New sec. Press and Hold Both Volume keys for Brom Mode
5. For Old sec. Press and Hold Volume UP for Brom Mode
6. Do not press any Key for PreLoader Mode
7. Install drivers if needed
====================================

Authenticating  ...  DONE
Initializing ... DONE
====================================
 
Waiting for device ...
Device found
MediaTek USB Port_V1632 (COM83)
Mode : BootRom
Port : COM83
Handshaking ...  DONE
Initializing :  DONE
Hw code: MT6765 - Helio P35/G35
Hw sub code: 8A00
Hw version: CA00
Sw version: 0000
Watchdog disable ...  DONE
Protection disable ...  DONE
Preparing Download Agent ...
DA Version : MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898
Drivers : MediaTek Inc.
Driver Date : 01/22/2015
Driver Version : 3.0.1504.0
Handshaking : DONE
Loading Preloader : DONE
Booting device : DONE
Chip name :  [MT6765]
Syncing with DA : DONE

Identifying Hardware ID ...
====================================
ChipID         :    MT6765
Software Ver     :    0000
Hardware Ver     :    CA00
Secure Ver     :    00
BootLdr Ver    :    00
Ext RAM        :    0x80000000
SRAM        :    0x00080000
Storage        :    0x0749400000
====================================
RAM Size    :    2.000 GB
SRAM Size    :    512.000 KB
Storage Size    :    29.145 GB
Storage Type    :    EMMC
====================================

Getting partition details : DONE
Partition count : 47

Searching FRP data...  DONE
Resetting FRP... 
USING ALGO - 1
Reset FRP DONE

Please disconnect device and reboot it manually

UAT PRO : 148.02 | 08 - December - 2022  [ 4:35:23 PM ]

Elapsed Time  :  6 seconds
  Reply With Quote
Old 12-10-2022, 07:23   #3923 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 4,574
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 761
Xiaomi POCO C3 (Angelican) Remove Done By UAT Pro

Xiaomi POCO C3 (Angelican) Remove Done By UAT Pro

Code:
1. Power off device
2. Remove Install battery if needed
3. Connect USB cable to powered off device
4. For New sec. Press and Hold Both Volume keys for Brom Mode
5. For Old sec. Press and Hold Volume UP for Brom Mode
6. Do not press any Key for PreLoader Mode
7. Install drivers if needed
====================================

- Connection : Flash Mode
- Method : By Model
- Brand : Xiaomi
- Model : POCO C3 (Angelican)
- Process : Reset FRP
====================================

Authenticating  ...  DONE
Initializing ... DONE
====================================
 
Waiting for device ...
Device found
MediaTek USB Port_V1632 (COM83)
Mode : BootRom
Port : COM83
Handshaking ...  DONE
Initializing :  DONE
Hw code: MT6765 - Helio P35/G35
Hw sub code: 8A00
Hw version: CA00
Sw version: 0000
Watchdog disable ...  DONE
Protection disable ...  DONE
Preparing Download Agent ...
DA Version : MTK_AllInOne_DA_v3.3001.12/30/2020.11:23_545866
Drivers : MediaTek Inc.
Driver Date : 01/22/2015
Driver Version : 3.0.1504.0
Handshaking : DONE
Loading Preloader : DONE
Booting device : DONE
Chip name :  [MT6765]
Syncing with DA : DONE

Identifying Hardware ID ...
====================================
ChipID         :    MT6765
Software Ver     :    0000
Hardware Ver     :    CA00
Secure Ver     :    00
BootLdr Ver    :    00
Ext RAM        :    0x80000000
SRAM        :    0x0003A000
Storage        :    0x0748800000
====================================
RAM Size    :    2.000 GB
SRAM Size    :    232.000 KB
Storage Size    :    29.133 GB
Storage Type    :    EMMC
====================================

Getting partition details : DONE
Partition count : 43

Searching FRP data...  DONE
Resetting FRP... 
USING ALGO - 1
Reset FRP DONE

Please disconnect device and reboot it manually

UAT PRO : 148.02 | 09 - December - 2022  [ 3:43:51 PM ]

Elapsed Time  :  7 seconds
  Reply With Quote
Old 12-10-2022, 14:34   #3924 (permalink)
No Life Poster
 
eletrico's Avatar
 
Join Date: Mar 2008
Location: Brasil,Fortaleza-Ce
Posts: 2,680
Member: 729325
Status: Offline
Sonork: 1581738
Thanks Meter: 890
Mi Account Poco M3 Done !!!!

Quote:
1. Power off device
2. Press and Hold Volume up + Power
3. Wait device screen to appear recovery Options
4. Select MiAssistant option
5. Insert Cable, Select Model and do the selected process
====================================

- Connection : MiAssistant Mode
- Selected Model : POCO M3 (citrus)
- Process : Remove MI Account | No Relock
====================================

Searching device by MiAssistant Mode ...
Device found

Reeading Info. please wait ...

Selected Model : POCO M3 (citrus)
Product Name : citrus_global
Device Name : citrus
Android Version : 11
Android OS : Red Velvet Cake
MIUI Version : V12.5.10.0.RJFMIXM
Branch Info. : F
Recovery Version : 2
DeviceSerial : 0xc27133cb
Rom Zone : 2
Language Info. : pt
Region Info. : BR
Country : BRAZIL

Reading MiCloud data ...
Data read done
Patching MiCloud data ...
Patching data done
Resetting Mi Cloud data ...
Mi Cloud data reset done
Searching required data for mi account reset ...
Required data found
Reading data. please wait....
Read data done
Reading MI Account Details
MI Account Details found
Phone linked : +55859******21
Searching MI account data
Mi account data found
Removing Mi account....
Remove Mi account success
Resetting frp, please wait ...
Reset frp done


If your device is hang on log , wipe data from recovery and reboot to system


UAT PRO : 148.02 | 08 - dezembro - 2022 [ 17:24:32 ]

Elapsed Time : 38 seconds

Mi Account Poco M3 Done !!!!!!!
  Reply With Quote
The Following User Says Thank You to eletrico For This Useful Post:
Old 12-11-2022, 15:06   #3925 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 4,574
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 761
Oppo A5s (CPH1909) Password Remove Done By UAT Pro

Oppo A5s (CPH1909) Password Remove Done By UAT Pro

Code:
1. Power off device
2. Remove Install battery if needed
3. Connect USB cable to powered off device
4. For New sec. Press and Hold Both Volume keys for Brom Mode
5. For Old sec. Press and Hold Volume UP for Brom Mode
6. Do not press any Key for PreLoader Mode
7. Install drivers if needed
====================================

- Connection : Flash Mode
- Method : By Model
- Brand : OPPO
- Model : Oppo A5s (CPH1909)
- Process : Format | Factory Reset 
====================================

Authenticating  ...  DONE
Initializing ... DONE
====================================
 
Waiting for device ...
Device found
MediaTek USB Port_V1632 (COM123)
Mode : BootRom
Port : COM123
Handshaking ...  DONE
Initializing :  DONE
Hw code: MT6765 - Helio P35/G35
Hw sub code: 8A00
Hw version: CA00
Sw version: 0000
Watchdog disable ...  DONE
Protection disable ...  DONE
Preparing Download Agent ...
DA Version : MTK_AllInOne_DA_v3.3001.12/30/2020.11:23_545866
Drivers : MediaTek Inc.
Driver Date : 01/22/2015
Driver Version : 3.0.1504.0
Handshaking : DONE
Loading Preloader : DONE
Booting device : DONE
Chip name :  [MT6765]
Syncing with DA : DONE

Identifying Hardware ID ...
====================================
ChipID         :    MT6765
Software Ver     :    0000
Hardware Ver     :    CA00
Secure Ver     :    00
BootLdr Ver    :    00
Ext RAM        :    0xC0000000
SRAM        :    0x0003A000
Storage        :    0x0749400000
====================================
RAM Size    :    3.000 GB
SRAM Size    :    232.000 KB
Storage Size    :    29.145 GB
Storage Type    :    EMMC
====================================

Getting partition details : DONE
Partition count : 40

Reading system Information...

Android Ver.       :    8.1.0
Android OS         :    Oreo
CPU                :    arm64-v8a
Build id           :    O11019
Host            :    ubuntu-142-22
Security Patch     :    2021-04-05
Manufacturer       :    OPPO
Local lang.        :    en-US

Searching for required data... DONE

Formatting device ...  DONE
All successfully done

Please disconnect device and reboot it manually
If device stuck on Logo, please use recovery to wipe it and reboot

UAT PRO : 148.02 | 11 - December - 2022  [ 12:46:00 PM ]

Elapsed Time  :  8 seconds
  Reply With Quote
Old 12-11-2022, 15:09   #3926 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 4,574
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 761
TRT-L21A (Enjoy 7 Plus) FRP Remove Done By UAT Pro

TRT-L21A (Enjoy 7 Plus) FRP Remove Done By UAT Pro

Code:
1. Power off device
2. Press and hold volume up + volume down insert usb cable
3. In some case requires special edl cable or test points
4. Install Qualcomm drivers if needed
====================================

- Connection : EDL
- Method : By Model
- Brand : Huawei
- Model : TRT-L21A (Enjoy 7 Plus)
- Process : Reset FRP
====================================

Waiting for QDLoader port ...
Port found
Device on Port    :    [ COM92 : Qualcomm HS-USB QDLoader 9008 ]

Analyzing Sahara please wait ...

HW_ID                   :    0001E0B6000 | Snapdragon 435
BLOCK_ID_S          :    66CBB4DA
BLOCK_ID_H          :    1OP814066QN4PNQO8N2NS16029S34QO8
BLOCK_ID_H          :    30558Q1796OQQ6SS028QON16OS1NR664

Executing boot      :    DONE
Version        :    3
Code Size    :    288
Signature Size    :    256
Header Type    :    OLD
FhVendor    :    QUALCOMM
HW ID        :    0006B0E100150062
SW ID        :    0000000000000003
OEM ID        :    0015
Vendor        :    HUAWEI
Model ID    :    0062
Pk Hash        :    CF4C483C77ACE109941508B766EF82E15DF69B90BC9E7A67E3BA17B88D8F1989
OEM Version    :    ljunshen-HP-Z240-SFF-Workstation
Image Variant    :    FAADANAZA
Qc Version    :    BOOT.BF.3.3-00142

Configuring         :    DONE
Reading Parts       :    DONE
Reading GPT     :    DONE
Partition Count     :    60

MEM_TYPE                          :    eMMC
Max_Payload_Size_InBytes     :    1048576
Max_Payload_Size_Supp.          :    1048576
Max_Bytes                        :    4096
Max_XML_Size                     :    4096
Version                          :    1
Target_Name                      :    [MSM 8937]
Userdata                         :    UnEncrypted

Searching FRP Data....
Frp data found
Resetting frp....

Reset frp success


UAT PRO : 148.02 | 10 - December - 2022  [ 1:45:41 PM ]

Elapsed Time  :  7 seconds
  Reply With Quote
Old 12-11-2022, 15:11   #3927 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 4,574
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 761
TA-1188 (Nokia 2.2) FRP Remove Done By UAT Pro

TA-1188 (Nokia 2.2) FRP Remove Done By UAT Pro

Code:
1. Power off device
2. Remove Install battery if needed
3. Connect USB cable to powered off device
4. For New sec. Press and Hold Both Volume keys for Brom Mode
5. For Old sec. Press and Hold Volume UP for Brom Mode
6. Do not press any Key for PreLoader Mode
7. Install drivers if needed
====================================

- Connection : Flash Mode
- Method : By Model
- Brand : Nokia
- Model : TA-1188 (Nokia 2.2)
- Process : Reset FRP
====================================

Authenticating  ...  DONE
Initializing ... DONE
====================================
 
Waiting for device ...
Device found
MediaTek USB Port_V1632 (COM83)
Mode : BootRom
Port : COM83
Handshaking ...  DONE
Initializing :  DONE
Hw code: MT6761 - Helio A20/P22/A22/A25/G25
Hw sub code: 8A00
Hw version: CA01
Sw version: 0200
Watchdog disable ...  DONE
Protection disable ...  DONE
Preparing Download Agent ...
DA Version : MTK_AllInOne_DA_v3.3001.2018/08/21.13:52_448808
Drivers : MediaTek Inc.
Driver Date : 01/22/2015
Driver Version : 3.0.1504.0
Handshaking : DONE
Loading Preloader : DONE
Booting device : DONE
Chip name :  [MT6761]
Syncing with DA : DONE

Identifying Hardware ID ...
====================================
ChipID         :    MT6761
Software Ver     :    0200
Hardware Ver     :    CA01
Secure Ver     :    00
BootLdr Ver    :    00
Ext RAM        :    0xC0000000
SRAM        :    0x00040000
Storage        :    0x073AC00000
====================================
RAM Size    :    3.000 GB
SRAM Size    :    256.000 KB
Storage Size    :    28.918 GB
Storage Type    :    EMMC
====================================

Getting partition details : DONE
Partition count : 46

Searching FRP data...  DONE
Resetting FRP... 
USING ALGO - 1
Reset FRP DONE

Please disconnect device and reboot it manually

UAT PRO : 148.02 | 11 - December - 2022  [ 5:16:54 PM ]

Elapsed Time  :  6 seconds
  Reply With Quote
Old 12-11-2022, 15:13   #3928 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 4,574
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 761
Redmi 10C (fog) FRP Remove Done By UAT Pro

Redmi 10C (fog) FRP Remove Done By UAT Pro

Code:
1. Power off device
2. Press and Hold Volume up + Power
3. Wait device screen to appear recovery Options
4. Select MiAssistant option
5. Insert Cable, Select Model and do the selected process
====================================

- Connection : MiAssistant Mode
- Selected Model : Redmi 10C (fog)
- Process : Reset FRP
====================================

Searching device by MiAssistant Mode ...
Device found

Reeading Info. please wait ...

Selected Model        :    Redmi 10C (fog)
Product Name        :    fog_global
Device Name        :    fog
Android Version        :    11
Android OS             :    Red Velvet Cake
MIUI Version        :    V13.0.10.0.RGEMIXM
Branch Info.        :    F
Recovery Version    :    2
DeviceSerial        :    0xb3c80fbe
Rom Zone        :    2
Language Info.        :    en
Region Info.        :    GB
Country            :    UNITED KINGDOM

Resetting frp, please wait ...
Reset frp done


UAT PRO : 148.02 | 11 - December - 2022  [ 1:49:43 PM ]

Elapsed Time  :  5 seconds
  Reply With Quote
Old 12-13-2022, 11:34   #3929 (permalink)
Product Supporter
 
Join Date: Mar 2016
Location: Bangladesh
Posts: 4,574
Member: 2548908
Status: Offline
Sonork: 100.1672479
Thanks Meter: 761
Oppo A37FW Password Remove Done By UAT Pro

Oppo A37FW Password Remove Done By UAT Pro

Code:
1. Power off device
2. Press and hold volume up + volume down insert usb cable
3. In some case requires special edl cable or test points
4. Install Qualcomm drivers if needed
====================================

- Connection : EDL
- Method : By Model
- Brand : Oppo
- Model : A37FW
- Process : Format | Factory Reset
====================================

Waiting for QDLoader port ...
Port found
Device on Port    :    [ COM87 : Qualcomm HS-USB QDLoader 9008 ]

Analyzing Sahara please wait ...

HW_ID                   :    0001E050700 | Snapdragon 410
BLOCK_ID_S          :    282C6D01
BLOCK_ID_H          :    PP8608N35748484O45Q57Q8OS3O78R57
BLOCK_ID_H          :    47R907SRS117P29443976NQNQ97N835S

Executing boot      :    DONE
Version        :    3
Code Size    :    96
Signature Size    :    256
Header Type    :    OLD
FhVendor    :    SECTOOLS
HW ID        :    0000000000000000
SW ID        :    0000000000000003
OEM ID        :    0000
Vendor        :    QUALCOMM
Model ID    :    0000
Pk Hash        :    FF5C720BDCDCFBFC67C300F9620B703960AC0D732C651047BBB50482A86784F1

Configuring         :    DONE
Reading Parts       :    DONE
Capacity            :    14.56 GB
Userdata            :    11.02 GB
Reading GPT     :    DONE
Partition Count     :    38

MEM_TYPE                          :    eMMC
Max_Payload_Size_InBytes     :    16384
Max_Payload_Size_Supp.          :    16384
Max_Bytes                        :    4096
Max_XML_Size                     :    4096
Version                          :    1
Target_Name                      :    [MSM 8916]
Userdata                         :    UnEncrypted

Reading Device Information...

Model              :    A37f
Hardware           :    msm8916
Android Ver.       :    5.1.1
CPU                :    arm64-v8a
Android OS         :    Lollipop
Platform           :    msm8916
Display id         :    A37fEX_11_190711
Build Date         :    Thu Jul 11 03:29:34 CST 2019
Build id           :    LMY47V
Security Patch     :    2018-03-01
Brand              :    OPPO
Manufacturer       :    OPPO
Product            :    A37f
Carrier            :    unknown
GsmVersion         :    5.1_r3

Formatting device Safe, please wait...
Formatting device success

UAT PRO : 148.02 | 12 - December - 2022  [ 5:50:02 PM ]

Elapsed Time  :  11 seconds
  Reply With Quote
Old 12-13-2022, 15:48   #3930 (permalink)
No Life Poster
 
Join Date: May 2008
Posts: 1,479
Member: 772651
Status: Offline
Thanks Meter: 1,694
SAMSUNG Galaxy A03 SM-A035F Frp Reset one click by UAT PRO

SAMSUNG Galaxy A03 SM-A035F Frp Reset one click by UAT PRO


Code:
1. Device must be Power off with battery inside
2. Press and Hold VOl-, or some phones requires press and hold VOl- and VOL+ together
3. Insert usb cable
4. Install spd drivers if needed
====================================

- Connection : Flash Mode
- Brand : SAMSUNG
- Model : SM-A035F (Galaxy A03)
- Process : Reset FRP
====================================

Waiting for device port ...
Port found

Port : [ COM96 : SPRD U2S Diag ]

Handshaking with device ...
Handshake done
Protocol : SPRD3
Detected SoC : Unisoc SC9863A

Sending config :  OK

Sending Boot [UAT PRO.boot1] : DONE
Sending Boot [UAT PRO.boot2] : DONE

BootVersion : Spreadtrum Boot Block version 1.1

Reseting Frp please wait ...
Reset Frp done


UAT PRO : 148.02 | 13 - December - 2022  [ 8:44:17 AM ]

Elapsed Time  :  2 minutes 3 seconds
  Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 13:31.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.30984 seconds with 9 queries

SEO by vBSEO