"Please add..." thread - Page 25 - GSM-Forum

Prototip4ik · 11-27-2018, 14:38

Platform: HUAWEI
Selected model: _TEST-MODE
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: PAR-LX1
Operation was failed!
Performed by 1.5.1.0 Software version.

gorgans · 11-29-2018, 16:44

Please add frp support for nokia 6.1 plus ta-1116

https://www.devicespecifications.com/en/model/9c3b4b96

gorgans · 12-05-2018, 04:41

Please add support for LG stylo 4. LM-Q710TS

https://www.lg.com/us/cell-phones/lg...mobile-stylo-4

marcelofigado · 12-06-2018, 03:49

Please add LG Q7 + frp mode, K11 PLUS, K9 TV and all new Motorola models like E5, E3, G6 play / PLUS bike, Z3 PLUS

bilelgsm · 12-06-2018, 11:30

hello Octoplus team
please add Lenovo S1La40 to FRP tool

IRFANAHMAD · 12-06-2018, 12:50

plz add hisense u965-DF

Octopus box · 12-06-2018, 13:25

Quote:

Originally Posted by marcelofigado

and all new Motorola models like E5, E3, G6 play / PLUS bike, Z3 PLUS

Supported:

Moto E3 (XT1700)
Moto E3 Power (XT1706)
Moto G6 Plus (XT1926-3)

Not supported:

Moto E5, Moto E5 Plus, Moto G6 Play, Moto Z3 plus try as XT1926 and post the result!

borsi · 12-07-2018, 12:14

you coud add option for frp remove on credits
for some huawei frp tool can not remove frp
add option for credits
and you can sell credits for some models
FRp by Imei example huawei
soft is beter because it can make it
and for you beter you can sell credits
Regards

for
INFO : 12/2/2018 10:47:36 PM > Platform: HUAWEI
INFO : 12/2/2018 10:47:36 PM > Selected model: BLA-L29
INFO : 12/2/2018 10:47:36 PM > Put the phone in FastBoot Mode:
INFO : 12/2/2018 10:47:36 PM > 1. Remove SD and SIM cards from the phone
INFO : 12/2/2018 10:47:36 PM > 2. Power phone OFF
INFO : 12/2/2018 10:47:36 PM > 3. Press and hold "Vol-" and insert USB cable
INFO : 12/2/2018 10:47:36 PM > 4. Wait until the phone enter in FastBoot Mode
INFO : 12/2/2018 10:47:36 PM > Searching for a phone. Please wait...
INFO : 12/2/2018 10:47:45 PM > Detected phone model: BLA-L29
INFO : 12/2/2018 10:47:45 PM > Phone SN: AQH7N17B0OOOOOOOO
INFO : 12/2/2018 10:47:45 PM > Phone IMEI: 866219xxxx6772
INFO : 12/2/2018 10:47:45 PM > Phone IMEI2: 8662xxxxx93778
INFO : 12/2/2018 10:47:45 PM > SW version: BLA-L29 8.0.0.157(C432)
INFO : 12/2/2018 10:47:45 PM > Connecting to server..
INFO : 12/2/2018 10:47:45 PM > OK
INFO : 12/2/2018 10:47:45 PM > Authorizing...
INFO : 12/2/2018 10:47:46 PM > OK
INFO : 12/2/2018 10:47:46 PM > Resetting FRP lock..
ERROR : 12/2/2018 10:47:56 PM > Operation was failed!
INFO : 12/2/2018 10:47:56 PM > Performed by 1.5.2.0 Software version.

Octopus box · 12-07-2018, 14:45

Quote:

Originally Posted by borsi

you coud add option for frp remove on credits
for some huawei frp tool can not remove frp
add option for credits
and you can sell credits for some models
FRp by Imei example huawei
soft is beter because it can make it
and for you beter you can sell credits
Regards

Yes, I think this is possible in future...

alexis_01 · 12-07-2018, 21:27

hi, i have two tablet with processor rk3126 and is not supported by octoplus frp.

please add.

alexis_01 · 12-07-2018, 21:28

hi, i have two tablet with processor rk3126 and is not supported by octoplus frp.

please add.

I can offer these tablets for testing if necessary.

zuoruixu · 12-13-2018, 12:13

Request to add xiaomi 8 MI account lock MAX3 account lock MIX2S account xiaomi 8 youth account

naeem9 · 12-13-2018, 15:07

Huawei Mate 10 Lite 8.0 frp add suport

RomanX_ · 12-14-2018, 09:48

Platform: HUAWEI
Selected model: PIC-LX9
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: PIC-LX9

SW version: PIC-LX9 8.0.0.330(C10)
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
Operation was failed
Performed by 1.5.4.0 Software version.

Avijormiteam · 12-18-2018, 15:31

Quote:

Originally Posted by Octopus box

If You have this device in hands, try to do the following: select "Device vendor: _GENERAL RESET FRP METHODS, "Device model: MTK GENERAL METHOD" and perform "Reset FRP" operation. Try to connect the device by the next way: power the phone off, press and hold "Vol-" (also try "Vol+" button) and connect USB cable. Post here the result.

HELP BLU G190Q

Platform: __GENERAL RESET FRP METHODS
INFO : 18/12/2018 10:03:29 a.m. > Selected model: MTK GENERAL
WARN : 18/12/2018 10:03:29 a.m. > Please, power phone OFF and connect USB cable.
INFO : 18/12/2018 10:03:29 a.m. > Searching for a phone. Please wait...
INFO : 18/12/2018 10:03:34 a.m. > Found phone on COM243
INFO : 18/12/2018 10:03:34 a.m. > Detecting Chip Version...
INFO : 18/12/2018 10:03:34 a.m. > HW Chip: MT6580: 6580.0000
INFO : 18/12/2018 10:03:34 a.m. > HW Version: 8A00.CA00.0000.0000
INFO : 18/12/2018 10:03:34 a.m. > Connecting...
INFO : 18/12/2018 10:03:34 a.m. > Brom Version: 05
INFO : 18/12/2018 10:03:34 a.m. > BootLoader Version: FE
INFO : 18/12/2018 10:03:34 a.m. > Sending auth...
INFO : 18/12/2018 10:03:34 a.m. > Searching Download Agent...
INFO : 18/12/2018 10:03:39 a.m. > Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
INFO : 18/12/2018 10:03:39 a.m. > Sending Download Agent...
INFO : 18/12/2018 10:03:39 a.m. > DA sent successfully
INFO : 18/12/2018 10:03:39 a.m. > Initializing DA...
INFO : 18/12/2018 10:03:39 a.m. > Synchronizing with DA...
INFO : 18/12/2018 10:03:39 a.m. > NAND Flash: not installed
INFO : 18/12/2018 10:03:39 a.m. > eMMC Flash: .13014E51.324A3935.511108B0.20C2C45D
INFO : 18/12/2018 10:03:39 a.m. > eMMC Flash: Unknown: Q2J95Q
INFO : 18/12/2018 10:03:39 a.m. > DA ver: 4.2.9C
INFO : 18/12/2018 10:03:39 a.m. > Initializing Memory Flash..
ERROR : 18/12/2018 10:03:41 a.m. > Initializing Memory Flash failed!
ERROR : 18/12/2018 10:03:41 a.m. > Operation was failed!
INFO : 18/12/2018 10:03:41 a.m. > Performed by 1.5.4.0 Software version.

11-27-2018, 14:38	#361 (permalink)
Prototip4ik Freak Poster Join Date: Jul 2018 Location: RUSSIA Age: 42 Posts: 139 Member: 2851795 Status: Offline Thanks Meter: 21	Platform: HUAWEI Selected model: _TEST-MODE Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: PAR-LX1 Operation was failed! Performed by 1.5.1.0 Software version.

11-29-2018, 16:44	#362 (permalink)
gorgans No Life Poster Join Date: May 2003 Location: Jamaica Posts: 1,967 Member: 28559 Status: Offline Thanks Meter: 85	Please add frp support for nokia 6.1 plus ta-1116 https://www.devicespecifications.com/en/model/9c3b4b96

12-05-2018, 04:41	#363 (permalink)
gorgans No Life Poster Join Date: May 2003 Location: Jamaica Posts: 1,967 Member: 28559 Status: Offline Thanks Meter: 85	Please add support for LG stylo 4. LM-Q710TS https://www.lg.com/us/cell-phones/lg...mobile-stylo-4

12-06-2018, 03:49	#364 (permalink)
marcelofigado Freak Poster Join Date: May 2016 Location: BRAZIL Posts: 239 Member: 2578528 Status: Offline Thanks Meter: 139	Please add LG Q7 + frp mode, K11 PLUS, K9 TV and all new Motorola models like E5, E3, G6 play / PLUS bike, Z3 PLUS

12-06-2018, 11:30	#365 (permalink)
bilelgsm Junior Member Join Date: Jan 2006 Location: France Posts: 33 Member: 223318 Status: Offline Thanks Meter: 2	hello Octoplus team please add Lenovo S1La40 to FRP tool

12-06-2018, 12:50	#366 (permalink)
IRFANAHMAD Junior Member Join Date: Nov 2010 Posts: 4 Member: 1433234 Status: Offline Sonork: 100.1596135 Thanks Meter: 0	plz add hisense u965-DF

12-07-2018, 21:27	#370 (permalink)
alexis_01 No Life Poster Join Date: Oct 2006 Location: Republica Dominicana Age: 40 Posts: 1,065 Member: 381487 Status: Offline Sonork: 100.1659930 Thanks Meter: 160	hi, i have two tablet with processor rk3126 and is not supported by octoplus frp. please add.

12-07-2018, 21:28	#371 (permalink)
alexis_01 No Life Poster Join Date: Oct 2006 Location: Republica Dominicana Age: 40 Posts: 1,065 Member: 381487 Status: Offline Sonork: 100.1659930 Thanks Meter: 160	hi, i have two tablet with processor rk3126 and is not supported by octoplus frp. please add. I can offer these tablets for testing if necessary.

12-13-2018, 12:13	#372 (permalink)
zuoruixu Major Poster Join Date: Dec 2017 Posts: 47 Member: 2788479 Status: Offline Thanks Meter: 7	Request to add xiaomi 8 MI account lock MAX3 account lock MIX2S account xiaomi 8 youth account

12-13-2018, 15:07	#373 (permalink)
naeem9 Junior Member Join Date: Jan 2017 Location: karachi pakistan Posts: 33 Member: 2669342 Status: Offline Thanks Meter: 6	Huawei Mate 10 Lite 8.0 frp add suport

12-14-2018, 09:48	#374 (permalink)
RomanX_ Junior Member Join Date: Aug 2018 Posts: 1 Member: 2855015 Status: Offline Thanks Meter: 0	Platform: HUAWEI Selected model: PIC-LX9 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: PIC-LX9 SW version: PIC-LX9 8.0.0.330(C10) Connecting to server..OK Authorizing...OK Resetting FRP lock.. Operation was failed Performed by 1.5.4.0 Software version.