🐙 Post here success Reset FRP story with Octoplus FRP Tool - Page 59 - GSM-Forum

genci titi 2002 · 06-17-2018, 12:37

Platform: HUAWEI
Selected model: LUA-L21
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM48
Detecting Chip Version...
HW Chip: MT6735: 0335.0000
HW Version: 8A00.CB00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Huawei_v.1, n.4
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4E31324D.4206F0DB.E06118D5
eMMC Flash: Samsung: FN12MB
DA ver: 4.2.93
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: HUAWEI
Model: HUAWEI LUA-L21
Device: HWLUA-L6735
Platform: mt6735m
Android version: 5.1
Display ID: LUA-L21C576B112
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HUAWEI_LUA-L21_17-06-2018_13-37-05.dump file
Performed by 1.3.0.2 Software version.

muskaangarg · 06-17-2018, 12:44

Welcome to Octoplus FRP Tool v.1.3.0.0
Platform: _GENERAL RESET FRP METHODS
Selected model: MTK GENERAL METHOD
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM28
Detecting Chip Version...
HW Chip: MT6737T: 0321.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2017-09-06.13:15_388644, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.41473265.050705A8.F12C4B5B
eMMC Flash: Hynix: HAG2e
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 15032 Mb
Internal RAM size: 128 Kb
External RAM size: 3072 Mb
Reading partition...
Reading info...
Brand: Micromax
Model: Micromax Q417
Device: Q417
Platform: mt6735
Android version: 5.1
Display ID: MMX_Q417_SW_L100_HW_V1.0_20160107
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Micromax_Micromax Q417_17-06-2018_16-51-11.dump file
Performed by 1.3.0.0 Software version.

genci titi 2002 · 06-18-2018, 08:26

Welcome to Octoplus FRP Tool v.1.3.0.2
Platform: SAMSUNG
Selected model: SM-G935FD
To put SM-G935FD into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
PIT was read successfully.
Searching for UART interface.. COM13
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.3.0.2 Software version.

islamic.tj · 06-18-2018, 08:41

Huawei LUA-U22 Reset FRP successfully done:

Code:

Welcome to Octoplus FRP Tool v.1.3.0.0
Platform: HUAWEI
Selected model: LUA-U22
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
No diagnostic ports found!
Operation was failed!
Performed by 1.3.0.0 Software version.

Platform: HUAWEI
Selected model: LUA-U22
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM58
Detecting Chip Version...
HW Chip: MT6582: 6582.0000
HW Version: 8A00.CA01.0001.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_v1.1, n.2
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.38473165.05075465.9145241B
eMMC Flash: Hynix: H8G1e
DA ver: 4.2.87
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading partition...
Reading info...
Brand: HUAWEI
Model: HUAWEI LUA-U22
Device: HWLUA-U6582
Platform: mt6582
Android version: 5.1
Display ID: LUA-U22C479B006
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HUAWEI_LUA-U22_18-06-2018_12-33-18.dump file
Performed by 1.3.0.0 Software version.

genci titi 2002 · 06-18-2018, 11:31

Platform: BLACKVIEW
Selected model: A10
Please, power phone OFF, press and hold "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM12
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: 05
BootLoader Version: FE
Sending auth...
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-04-25.11:32_437806, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .45010044.46343031.36011816.04BD84B1
eMMC Flash: Sandisk: DF4016
DA ver: 4.2.9C
Initializing Memory Flash..
Sending BootLoader Info...
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 15028 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: Blackview
Model: A10
Device: A10
Platform: mt6580
Android version: 7.0
Display ID: V3EG62A.JKE.HB.H.P3.1109.V3.04
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as BLACKVIEW_A10_18-06-2018_12-30-24.dump file
Performed by 1.3.0.3 Software version.

soulay · 06-18-2018, 11:45

wahiditunes · 06-18-2018, 12:48

Welcome to Octoplus FRP Tool v.1.3.0.0
Platform: LG
Selected model: M700A
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM18
Reading info...
Detected phone model: LG-M700A
Mode: Emergency
Initializing..
SW version: LGM700AAT-00-V10h-AME-XX-DEC-05-2017-32G+0
Android version: 7.1.1
Reset FRP operation for M700A will delete all user data on the phone (contacts, pictures and others)!
Do You want to continue?
Reading partition...
Detecting writing method...
Trying to repeat..
Trying third method...
Resetting FRP lock..
Writing loader...
Writing userdata...
Formating encrypt section
Restoring loader...
Perform factory reset to complete operation!

islamic.tj · 06-18-2018, 16:31

XIAOMI REDMI 4X - Mi Account Removed 100% worked ))

Quote:

Welcome to Octoplus FRP Tool v.1.3.0.0
Platform: XIAOMI
Selected model: REDMI 4X
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Operation was canceled
Performed by 1.3.0.0 Software version.

Platform: XIAOMI
Selected model: REDMI 4X
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
No diagnostic ports found!
Operation was failed!
Performed by 1.3.0.0 Software version.

Platform: XIAOMI
Selected model: REDMI 4X
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM10
Mode: Qualcomm 9008
Connecting...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Xiaomi
Model: Redmi 4X
Device: santoni
Platform: msm8937
Android version: 7.1.2
Display ID: N2G47H
Resetting Mi Account...
Reading MI part...
Writing MI part...
Rebooting phone
Backup saved as XIAOMI_REDMI 4X_18-06-2018_20-25-44.dump file
Mi Account is successfully reseted!
Performed by 1.3.0.0 Software version.

val celular · 06-18-2018, 18:48

Reset FRP G928G via UART ( UFS CHIPS ) Versão Android 7.0

Nivel patch segurança Androide 1 de Maio de 2018

Welcome to Octoplus FRP Tool v.1.3.0.0
Platform: SAMSUNG
Selected model: SM-G928G
To put SM-G928G into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
PIT was read successfully.
Searching for UART interface.. COM6
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.3.0.0 Software version.

parabelum · 06-19-2018, 08:25

Platform: _GENERAL RESET FRP METHODS
Selected model: MTK CUSTOM METHOD
Selected Download Agent: D:\DA_SWSEC_TIT_L01.bin
Please, power phone OFF (press and hold "Vol+"/"Vol-" button) and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM11
Detecting Chip Version...
HW Chip: MT6737T: 0321.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.00.00, n.13
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .11010030.31364733.3200FE34.AE0882BF
eMMC Flash: Toshiba: 016G32
DA ver: 4.2.93
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 15028 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: HONOR
Model: TIT-L01
Device: HWTIT-L6735
Platform: mt6735
Android version: 5.1
Display ID: TIT-L01C479B111
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HONOR_TIT-L01_19-06-2018_15-15-07.dump file
Performed by 1.3.0.0 Software version.

islamic.tj · 06-19-2018, 09:08

Samsung SM-A520F FRP removed )

Quote:

Welcome to Octoplus FRP Tool v.1.3.0.0
Platform: SAMSUNG
Selected model: SM-A520F
Searching for a phone (waiting for ADB device)...
Reading info...
Detected phone model: SM-A520F
Firmware compiled date: Tue Jan 2 18:15:59 KST 2018
PDA version: FA60_A520FXXU4ARA4
CSC version: unknown
SW version: A520FXXS4BQLE
Phone SN: R58J94ZJD9J
Android version: 6.0.1 (MMB29K)
Sales code: unknown
Country: unknown
HW platform: exynos5
HW Chip: exynos7880
HW Modem: SHANNON325
Security patch level: 2016-12-01
Codename: a5y17ltexx
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
Performed by 1.3.0.0 Software version.

islamic.tj · 06-19-2018, 09:46

LG H790 FRP Successfully Removed!!!:

Quote:

Welcome to Octoplus/Octopus Box LG Software version 2.8.5
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM55
Selected model: H790
Please, put the phone into download mode manually (Power phone OFF,
press and hold "Vol+" button and connect the cable).
Reading info...Failed!
Could not detect mode!
Performed by 2.8.5 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM63
Selected model: H790
Please, put the phone into download mode manually (Power phone OFF,
press and hold "Vol+" button and connect the cable).
Reading info...
IMEI: ***********
Android version:
Battery level: 54%
SW Version: LGH790AT-00-V10f-NXS-XXX-OCT-0
Mode: Emergency
Initializing flash...OK
SW version: LGH790AT-00-V10f-NXS-XXX-OCT-03-2015-32G-MDA89E-
US
Android version: 6.0
LAF Version: 1.2
Product ID: PT02S150924002160
IMEI: ************
Target operator: GOOGLE
Hardware:
After performing Reset FRP operation the phone may stuck on logo. To fix
this problem You shall reflash the phone with the latest firmare.

Perform Reset FRP operation at your own risk. Continue?
Reading partitions...OK
Resetting FRP Lock...OK
Resetting FRP lock successfully completed!
If the phone hang on logo or is restarting afetr performing the operation,
please re-flash it using the same or higher version of firmware
Performed by 2.8.5 Software version.

Pijush Das · 06-19-2018, 10:51

SAMSUNG SM-J701F/DS FRP Lock is Successfully Reseted

wahiditunes · 06-19-2018, 14:16

Welcome to Octoplus FRP Tool v.1.3.0.0
Platform: HUAWEI
Selected model: LUA-U22
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM105
Detecting Chip Version...
HW Chip: MT6582: 6582.0000
HW Version: 8A00.CA01.0001.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_v1.1, n.2
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .11010030.30384737.300095B7.92E1249F
eMMC Flash: Toshiba: 008G70
DA ver: 4.2.87
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading partition...
Reading info...
Brand: HUAWEI
Model: HUAWEI LUA-U22
Device: HWLUA-U6582
Platform: mt6582
Android version: 5.1
Display ID: LUA-U22C328B014
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HUAWEI_LUA-U22_19-06-2018_16-15-16.dump file
Performed by 1.3.0.0 Software version.

equinoks · 06-19-2018, 17:59

it was on 8.0 after downgrading to 7.0 well done

Welcome to Octoplus FRP Tool v.1.3.0.0
Platform: LG
Selected model: H870
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM2406
Reading info...
Detected phone model: LG-H870
Mode: Emergency
Initializing..
SW version: LGH870AT-00-V10f-EUR-XX-APR-17-2017+0
Android version: 7.0
Reading partition...
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.3.0.0 Software version.

06-17-2018, 12:37	#871 (permalink)
genci titi 2002 No Life Poster Join Date: Oct 2005 Location: TITI 2002 SERVIS CELULAR PG/AL Posts: 4,183 Member: 193804 Status: Offline Sonork: 100.1684818 Thanks Meter: 1,693	HUAWEI LUA-L21 FRP lock is successfully reseted Platform: HUAWEI Selected model: LUA-L21 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM48 Detecting Chip Version... HW Chip: MT6735: 0335.0000 HW Version: 8A00.CB00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_Octoplus_Huawei_v.1, n.4 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010046.4E31324D.4206F0DB.E06118D5 eMMC Flash: Samsung: FN12MB DA ver: 4.2.93 Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 0 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: HUAWEI Model: HUAWEI LUA-L21 Device: HWLUA-L6735 Platform: mt6735m Android version: 5.1 Display ID: LUA-L21C576B112 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as HUAWEI_LUA-L21_17-06-2018_13-37-05.dump file Performed by 1.3.0.2 Software version.

06-17-2018, 12:44	#872 (permalink)
muskaangarg Freak Poster Join Date: Jan 2007 Posts: 135 Member: 433038 Status: Offline Thanks Meter: 89	Micromax Q417 FRP lock is successfully reseted! Welcome to Octoplus FRP Tool v.1.3.0.0 Platform: _GENERAL RESET FRP METHODS Selected model: MTK GENERAL METHOD Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM28 Detecting Chip Version... HW Chip: MT6737T: 0321.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2017-09-06.13:15_388644, n.10 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .90014A48.41473265.050705A8.F12C4B5B eMMC Flash: Hynix: HAG2e DA ver: 4.2.9B Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 15032 Mb Internal RAM size: 128 Kb External RAM size: 3072 Mb Reading partition... Reading info... Brand: Micromax Model: Micromax Q417 Device: Q417 Platform: mt6735 Android version: 5.1 Display ID: MMX_Q417_SW_L100_HW_V1.0_20160107 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Micromax_Micromax Q417_17-06-2018_16-51-11.dump file Performed by 1.3.0.0 Software version.

06-18-2018, 08:26	#873 (permalink)
genci titi 2002 No Life Poster Join Date: Oct 2005 Location: TITI 2002 SERVIS CELULAR PG/AL Posts: 4,183 Member: 193804 Status: Offline Sonork: 100.1684818 Thanks Meter: 1,693	SM-G935FD FRP lock is successfully reseted! Welcome to Octoplus FRP Tool v.1.3.0.2 Platform: SAMSUNG Selected model: SM-G935FD To put SM-G935FD into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Searching for a phone. Please wait... Phone found. Initializing.. PIT was read successfully. Searching for UART interface.. COM13 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Resetting FRP lock.. FRP lock is successfully reseted! Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset" Performed by 1.3.0.2 Software version.

06-18-2018, 11:31	#875 (permalink)
genci titi 2002 No Life Poster Join Date: Oct 2005 Location: TITI 2002 SERVIS CELULAR PG/AL Posts: 4,183 Member: 193804 Status: Offline Sonork: 100.1684818 Thanks Meter: 1,693	BLACKVIEW A10 Reset FRP successfully done Platform: BLACKVIEW Selected model: A10 Please, power phone OFF, press and hold "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM12 Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: 05 BootLoader Version: FE Sending auth... Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-04-25.11:32_437806, n.11 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .45010044.46343031.36011816.04BD84B1 eMMC Flash: Sandisk: DF4016 DA ver: 4.2.9C Initializing Memory Flash.. Sending BootLoader Info... Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 15028 Mb Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Reading info... Brand: Blackview Model: A10 Device: A10 Platform: mt6580 Android version: 7.0 Display ID: V3EG62A.JKE.HB.H.P3.1109.V3.04 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as BLACKVIEW_A10_18-06-2018_12-30-24.dump file Performed by 1.3.0.3 Software version.

06-18-2018, 11:45	#876 (permalink)
soulay Freak Poster Join Date: Aug 2009 Location: Algeria Posts: 165 Member: 1106514 Status: Offline Thanks Meter: 133	CONDOR T4-SP531 Reset FRP successfully done

06-18-2018, 12:48	#877 (permalink)
wahiditunes Freak Poster Join Date: Jun 2017 Location: SAUDI ARABIA RIYADH Posts: 358 Member: 2725078 Status: Offline Sonork: 1680162 Thanks Meter: 173	LG M700A Reset FRP successfully done Welcome to Octoplus FRP Tool v.1.3.0.0 Platform: LG Selected model: M700A Put the phone into Download Mode: 1. Power phone OFF; 2. Press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM18 Reading info... Detected phone model: LG-M700A Mode: Emergency Initializing.. SW version: LGM700AAT-00-V10h-AME-XX-DEC-05-2017-32G+0 Android version: 7.1.1 Reset FRP operation for M700A will delete all user data on the phone (contacts, pictures and others)! Do You want to continue? Reading partition... Detecting writing method... Trying to repeat.. Trying third method... Resetting FRP lock.. Writing loader... Writing userdata... Formating encrypt section Restoring loader... Perform factory reset to complete operation!

06-18-2018, 18:48	#879 (permalink)
val celular Junior Member Join Date: Aug 2007 Posts: 3 Member: 576580 Status: Offline Thanks Meter: 2	Reset FRP G928G via UART ( UFS CHIPS ) Versão Android 7.0 successfully done Reset FRP G928G via UART ( UFS CHIPS ) Versão Android 7.0 Nivel patch segurança Androide 1 de Maio de 2018 Welcome to Octoplus FRP Tool v.1.3.0.0 Platform: SAMSUNG Selected model: SM-G928G To put SM-G928G into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Searching for a phone. Please wait... Phone found. Initializing.. PIT was read successfully. Searching for UART interface.. COM6 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Resetting FRP lock.. FRP lock is successfully reseted! Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset" Performed by 1.3.0.0 Software version. Last edited by Octopus box; 06-18-2018 at 19:01.

06-19-2018, 08:25	#880 (permalink)
parabelum Freak Poster Join Date: Mar 2006 Posts: 190 Member: 242574 Status: Offline Thanks Meter: 16	🐙 HUAWEI TIT-L01 FRP reset done Platform: _GENERAL RESET FRP METHODS Selected model: MTK CUSTOM METHOD Selected Download Agent: D:\DA_SWSEC_TIT_L01.bin Please, power phone OFF (press and hold "Vol+"/"Vol-" button) and connect USB cable. Searching for a phone. Please wait... Found phone on COM11 Detecting Chip Version... HW Chip: MT6737T: 0321.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.00.00, n.13 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .11010030.31364733.3200FE34.AE0882BF eMMC Flash: Toshiba: 016G32 DA ver: 4.2.93 Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 15028 Mb Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Reading info... Brand: HONOR Model: TIT-L01 Device: HWTIT-L6735 Platform: mt6735 Android version: 5.1 Display ID: TIT-L01C479B111 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as HONOR_TIT-L01_19-06-2018_15-15-07.dump file Performed by 1.3.0.0 Software version. Last edited by Octopus box; 06-19-2018 at 08:42.

06-19-2018, 10:51	#883 (permalink)
Pijush Das Product Supporter Join Date: Mar 2013 Location: JTAG/eMMC/UFS Posts: 892 Member: 1902789 Status: Offline Thanks Meter: 1,101	🐙 SAMSUNG SM-J701F/DS FRP Lock is Successfully Reseted SAMSUNG SM-J701F/DS FRP Lock is Successfully Reseted Last edited by Octopus box; 06-19-2018 at 11:09.

06-19-2018, 14:16	#884 (permalink)
wahiditunes Freak Poster Join Date: Jun 2017 Location: SAUDI ARABIA RIYADH Posts: 358 Member: 2725078 Status: Offline Sonork: 1680162 Thanks Meter: 173	Huawei LUA-U22 Reset FRP successfully done Welcome to Octoplus FRP Tool v.1.3.0.0 Platform: HUAWEI Selected model: LUA-U22 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM105 Detecting Chip Version... HW Chip: MT6582: 6582.0000 HW Version: 8A00.CA01.0001.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_Octoplus_v1.1, n.2 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .11010030.30384737.300095B7.92E1249F eMMC Flash: Toshiba: 008G70 DA ver: 4.2.87 Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading partition... Reading info... Brand: HUAWEI Model: HUAWEI LUA-U22 Device: HWLUA-U6582 Platform: mt6582 Android version: 5.1 Display ID: LUA-U22C328B014 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as HUAWEI_LUA-U22_19-06-2018_16-15-16.dump file Performed by 1.3.0.0 Software version. Last edited by Octopus box; 06-19-2018 at 14:23.

06-19-2018, 17:59	#885 (permalink)
equinoks No Life Poster Join Date: Feb 2003 Location: In the dark side ;) Age: 44 Posts: 2,314 Member: 21508 Status: Offline Thanks Meter: 186	🐙 LG H870 FRP successfully removed it was on 8.0 after downgrading to 7.0 well done Welcome to Octoplus FRP Tool v.1.3.0.0 Platform: LG Selected model: H870 Put the phone into Download Mode: 1. Power phone OFF; 2. Press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM2406 Reading info... Detected phone model: LG-H870 Mode: Emergency Initializing.. SW version: LGH870AT-00-V10f-EUR-XX-APR-17-2017+0 Android version: 7.0 Reading partition... Resetting FRP lock.. FRP lock is successfully reseted! Performed by 1.3.0.0 Software version. Last edited by Octopus box; 06-20-2018 at 04:48.