🐙 Post here success Reset FRP story with Octoplus FRP Tool - Page 418 - GSM-Forum

gchipangura · 11-03-2020, 11:16

LG M250Y FRP Successfully removed by same! still locked

Quote:

Welcome to Octoplus FRP Tool v.1.9.7.0
Card S/N: 00013872
Work ID: FFFFFFFFFFFFFFFF
Platform: LG
Selected model: M250Y
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
No diagnostic ports found!
Operation was failed!
Performed by 1.9.7.0 Software version.

Work ID: FFFFFFFFFFFFFFFF
Platform: LG
Selected model: M250Y
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM88
Reading info...
Detected phone model: LG-M250Y
Mode: Emergency
Initializing..
SW version: LGM250YAT-00-V10f-ZAF-XX-FEB-21-2019+0
Android version: 7.0
Platform: mt6750
Reset FRP operation for M250Y will delete all user data on the phone (contacts, pictures and others)!
Do You want to continue?
Reading partition...
Detecting writing method...
Trying to repeat..
Trying third method...
Resetting FRP lock..
Writing loader...
Writing userdata...
Formatting encrypt section
Restoring loader...
Perform factory reset to complete operation!
FRP lock is successfully reseted!
Performed by 1.9.7.0 Software version.

apacheadmiral · 11-03-2020, 20:24

Work ID: 0000000000236C4C
Platform: HUAWEI
Selected model: AMN-LX9
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Searching for a phone. Please wait...
Found phone on COM279
Port name: MediaTek USB Port_V1632 (COM279)
Detecting Chip Version...
HW Chip: MT6761: 0717.0000
HW Version: 8A00.CA01.0200.0000
Connecting...
Brom Version: 05
BootLoader Version: FE
Sending auth...
Sending Auth Data...
Target Config: 0x000000E5
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898, n.1
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
Mobile Status: SYNC
Mobile Status: brom
Sending BootLoader Info...
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Mobile Status: SYNC
Reading Flash Info...
EMMC rpmb size: 16 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29820 Mb
eMMC Flash: .90014A68.42386150.3E0196B7.30CCC691
eMMC Flash: Hynix: hB8aP>
Internal RAM size: 512 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Searching for signatures...
Resetting FRP lock..
Backup saved as HUAWEI_AMN-LX9_03-11-2020_21-22-32.dump file
FRP lock is successfully reseted!
Performed by 1.9.7.0 Software version.

apacheadmiral · 11-03-2020, 20:26

Work ID: 000000000023696C
Platform: HUAWEI
Selected model: EVA-L19
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: EVA-L19
Phone SN: XVV7N17704000463
Phone IMEI: 868445025023480
Phone IMEI2: 868445025027481
SW version: EVA-L19C185B403
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.9.7.0 Software version.

Yahia_Sb · 11-05-2020, 07:21

nokia 2.1-ta-1080 frp done

Welcome to Octoplus FRP Tool v.1.9.7.0
Card S/N: 01009072
Work ID: 000000000012D2B9
Platform: NOKIA
Selected model: TA-1080
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
No diagnostic ports found!
Operation was failed!
Performed by 1.9.7.0 Software version.

Work ID: 000000000012D2CD
Platform: NOKIA
Selected model: TA-1080
Put the phone into EDL mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint after 3-5 seconds.
Found phone on COM20
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 000560E100000000
QC CPU: Snapdragon 425 MSM8917
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Android version: 10
Display ID: 00WW_4_11C
Firmware version: 00WW_4_11C
Resetting FRP lock..
Searching for signatures...
FRP lock is successfully reseted!
Performed by 1.9.7.0 Software version.

SandyBridge · 11-07-2020, 20:38

Code:

Welcome to Octoplus FRP Tool v.1.9.7.0
Card S/N: 00000654
Work ID: 00000000001603A5
Platform: HUAWEI
Selected model: ALP-AL00
Put the phone into Factory mode: 
1. Attach testpoint as shown in Help manual; 
2. Connect USB cable; 
3. Release testpoint.
Searching for a phone. Please wait...
Operation was canceled
Performed by 1.9.7.0 Software version.

Work ID: 00000000001603CD
Platform: HUAWEI
Selected model: ALP-AL00
Put the phone into Factory mode: 
1. Attach testpoint as shown in Help manual; 
2. Connect USB cable; 
3. Release testpoint.
Searching for a phone. Please wait...
No diagnostic ports found!
Operation was failed!
Performed by 1.9.7.0 Software version.

Work ID: 0000000000160460
Platform: HUAWEI
Selected model: ALP-AL00
Put the phone into Factory mode: 
1. Attach testpoint as shown in Help manual; 
2. Connect USB cable; 
3. Release testpoint.
Searching for a phone. Please wait...
Found phone on COM156
Checking resource files...
Downloading resources...
Searching for a phone. Please wait...
Found phone on COM156
Setting options...
Writing BOOT...
Downloading resources...
Searching for a phone. Please wait...
Found phone on COM156
Setting options...
Writing BOOT...
Downloading resources...
Searching for a phone. Please wait...
Found phone on COM156
Setting options...
Writing BOOT...
Downloading resources...
Searching for a phone. Please wait...
Found phone on COM156
Setting options...
Writing BOOT...
Switching to FastBoot mode...
Searching for a phone. Please wait...
Detected phone model: ALP-AL00
Phone SN: UYT0218227000248
SW version: ALP-AL00 10.0.0.175(C00E175R1P4)
FRP lock is successfully reseted!
Performed by 1.9.7.0 Software version.

genci titi 2002 · 11-08-2020, 11:38

Work ID: 0000000000166DB6
Platform: TURBOX
Selected model: FIRE 4G
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM13
Port name: MediaTek PreLoader USB VCOM (Android) (COM13)
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CB00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 02
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .70010045.48414345.4101138F.CA1B864B
eMMC Flash: Pretec: EHACEA
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14928 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: Turbox
Model: Fire_4G
Device: Fire_4G
Android version: 8.1.0
Display ID: LF710T.O1.V10.8.JXX-V09.8735BD.M32.6960.20200313
Factory Reset...
Formatting User Data section
Factory Reset is successfully performed!
Performed by 1.9.7.0 Software version.

we_fix_it · 11-09-2020, 10:46

octoplus team please add VFD510 in the list. is similar to VFD511 , but the phone back sticker is VFD510 .

press and hold both volume and connect USB cable.

Welcome to Octoplus FRP Tool v.1.9.7.0
Card S/N: 0201798A
Work ID: 0000000000173AE8
Platform: VODAFONE
Selected model: VFD511
Please, power phone OFF and connect USB cable.
Found phone on COM12
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 009600E100040000
QC CPU: Snapdragon 210 MSM8909
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Vodafone
Model: VFD 511
Device: VFD511
Platform: msm8909
Android version: 7.1.1
Display ID: VFD-51x_MRB06
Firmware version: 20190309.215534
Resetting FRP lock..
Searching for signatures...
FRP lock is successfully reseted!
Performed by 1.9.7.0 Software version.

gchipangura · 11-09-2020, 14:19

LG M400Y FRP successfully done

Quote:

Welcome to Octoplus FRP Tool v.1.9.7.0
Card S/N: 00013872
Work ID: 0000000000177837
Platform: LG
Selected model: M400Y
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM88
Reading info...
Detected phone model: LG-M400Y
Mode: Emergency
Initializing..
SW version: LGM400YAT-00-V10f-ZAF-XX-FEB-25-2019+0
Android version: 7.0
Platform: mt6750
Reset FRP operation for M400Y will delete all user data on the phone (contacts, pictures and others)!
Do You want to continue?
Reading partition...
Detecting writing method...
Trying to repeat..
Trying third method...
Resetting FRP lock..
Writing loader...
Writing userdata...
Formatting encrypt section
Restoring loader...
Perform factory reset to complete operation!
FRP lock is successfully reseted!
Performed by 1.9.7.0 Software version.

allumts · 11-10-2020, 18:47

Lenovo TB2-X30F FRP REMOVED WITH SUCCESS BY King of OCTOPUS

INFO:

Code:

Platform: LENOVO
Selected model: TB2-X30F
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Found phone on COM61
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 009680E100000000
QC CPU: Snapdragon 212 APQ8009
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Lenovo
Model: Lenovo TB2-X30F
Device: TB2-X30F
Platform: msm8909
Android version: 6.0.1
Display ID: TB2-X30F_S000113_160816_ROW
Firmware version: TB2-X30F_S000113_160816_ROW
Performed by 1.9.7.0 Software version.

FRP DONE:

Code:

Work ID: 000000000018CC82
Platform: LENOVO
Selected model: TB2-X30F
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Found phone on COM61
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 009680E100000000
QC CPU: Snapdragon 212 APQ8009
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Lenovo
Model: Lenovo TB2-X30F
Device: TB2-X30F
Platform: msm8909
Android version: 6.0.1
Display ID: TB2-X30F_S000113_160816_ROW
Firmware version: TB2-X30F_S000113_160816_ROW
Resetting FRP lock..
Searching for signatures...
FRP lock is successfully reseted!
Performed by 1.9.7.0 Software version.

BR
allumts

NeeMan · 11-11-2020, 17:49

Welcome to Octoplus FRP Tool v.1.9.7.0
Card S/N:
Work ID: 00000000001A5FE2
Platform: CATERPILLAR
Selected model: CAT S30
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Found phone on COM22
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 009600E100000000
QC CPU: Snapdragon 210 MSM8909
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Cat
Model: S31
Device: CatS31
Platform: msm8909
Android version: 8.1.0
Display ID: LTE_S0201121.0_S31_1.020.00
Firmware version: LTE_S0201121.0_S31_1.020.00
Factory Reset...
Formatting User Data section
Formatting Cache section
Rebooting phone
Backup saved as Cat_S31_11-11-2020_18-43-42.dump file
Factory Reset is successfully performed!
Performed by 1.9.7.0 Software version.

NeeMan · 11-11-2020, 17:58

Work ID: 00000000001A63B7
Platform: CATERPILLAR
Selected model: CAT S31
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Found phone on COM22
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 009600E100000000
QC CPU: Snapdragon 210 MSM8909
QC SW VER: 00000000
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Cat
Model: S31
Device: CatS31
Platform: msm8909
Android version: 8.1.0
Display ID: LTE_S0201121.0_S31_1.020.00
Firmware version: LTE_S0201121.0_S31_1.020.00
Resetting FRP lock..
Searching for signatures...
FRP lock is successfully reseted!
Performed by 1.9.7.0 Software version.

Dr_Wolodya · 11-11-2020, 18:43

Nokia 1 TA-1047 Reset FRP successfully done:

Code:

Platform: NOKIA
Selected model: TA-1047
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM8
Port name: MediaTek PreLoader USB VCOM (Android) (COM8)
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 02
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Nokia_v.1, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4E36324D.420355F8.E4ED3B0D
eMMC Flash: Samsung: FN62MB
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Nokia
Model: Nokia 1
Device: FRT
Android version: 8.1.0
Display ID: 00WW_0_28D
Searching for signatures...
Resetting FRP lock..
Backup saved as Nokia_Nokia 1_11-11-2020_19-40-21.dump file
FRP lock is successfully reseted!
Performed by 1.9.7.0 Software version.

Dr_Wolodya · 11-11-2020, 18:45

Nokia 1 FRT TA-1047 Reset FRP successfully done:

Code:

Platform: NOKIA
Selected model: TA-1047
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM8
Port name: MediaTek PreLoader USB VCOM (Android) (COM8)
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 02
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Nokia_v.1, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4E36324D.420355F8.E4ED3B0D
eMMC Flash: Samsung: FN62MB
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 0 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Nokia
Model: Nokia 1
Device: FRT
Android version: 8.1.0
Display ID: 00WW_0_28D
Searching for signatures...
Resetting FRP lock..
Backup saved as Nokia_Nokia 1_11-11-2020_19-40-21.dump file
FRP lock is successfully reseted!
Performed by 1.9.7.0 Software version.

.:MASRSYSTEM:. · 11-13-2020, 23:38

FRP Motorola G6 XT1925-1 Done

Quote:

Welcome to Octoplus FRP Tool v.1.9.7.0
Work ID: 0000000000XXXXXX
Platform: MOTOROLA
Selected model: XT1925-5
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8953.gen
Firmware released date: Jun 28 2018
Firmware released time: 23:26:00
Firmware compiled date: Jun 27 2018
Firmware compiled time: 02:00:00
SW version: MPSS.TA.2.3.c14-00014-8953_GENW3K_PACK-1
Enabling "USB Debugging" mode...
Searching for a phone. Please wait...
Enabling "USB Debugging" mode...
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB / Fastboot device)...
Phone found.
Reading info...
Phone model: motorola moto g(6)
SW version: OPSS27.82-87-6
Date: Mon Nov 5 10:49:53 CST 2018
Android version: 8.0.0
Baseband M450_08.14.10.61R ALI_LATAM_CUST
Detected phone model: XT1925-1
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.9.7.0 Software version.

tornado555 · 11-14-2020, 13:26

Platform: HUAWEI
Selected model: CLT-L29
Put the phone into Factory mode:
1. Attach testpoint as shown in Help manual;
2. Connect USB cable;
3. Release testpoint.
Searching for a phone. Please wait...
Found phone on COM3
Checking resource files...
Downloading resources...
Searching for a phone. Please wait...
Found phone on COM3
Setting options...
Writing BOOT...
Downloading resources...
Searching for a phone. Please wait...
Found phone on COM3
Setting options...
Writing BOOT...
Downloading resources...
Searching for a phone. Please wait...
Found phone on COM3
Setting options...
Writing BOOT...
Downloading resources...
Searching for a phone. Please wait...
Found phone on COM3
Setting options...
Writing BOOT...
Switching to FastBoot mode...
Searching for a phone. Please wait...
Detected phone model: CLT-L29
Phone SN: WXXXXXXXXXXXX
Phone IMEI: 867XXXXXXXXXXX
Phone IMEI2: 867XXXXXXXXXX
SW version: CLT-L29 9.1.0.383(C185E5R1P12)
FRP lock is successfully reseted!
Performed by 1.9.6.0 Software version.

11-11-2020, 17:49	#6265 (permalink)
NeeMan No Life Poster Join Date: May 2008 Location: gsm city Posts: 798 Member: 767786 Status: Offline Thanks Meter: 320	Cat S31 factory reset - FREEZING ON STARTUP Welcome to Octoplus FRP Tool v.1.9.7.0 Card S/N: Work ID: 00000000001A5FE2 Platform: CATERPILLAR Selected model: CAT S30 Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable. Found phone on COM22 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 009600E100000000 QC CPU: Snapdragon 210 MSM8909 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Brand: Cat Model: S31 Device: CatS31 Platform: msm8909 Android version: 8.1.0 Display ID: LTE_S0201121.0_S31_1.020.00 Firmware version: LTE_S0201121.0_S31_1.020.00 Factory Reset... Formatting User Data section Formatting Cache section Rebooting phone Backup saved as Cat_S31_11-11-2020_18-43-42.dump file Factory Reset is successfully performed! Performed by 1.9.7.0 Software version.

11-11-2020, 17:58	#6266 (permalink)
NeeMan No Life Poster Join Date: May 2008 Location: gsm city Posts: 798 Member: 767786 Status: Offline Thanks Meter: 320	Cat S31 - FRP Removed Work ID: 00000000001A63B7 Platform: CATERPILLAR Selected model: CAT S31 Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable. Found phone on COM22 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 009600E100000000 QC CPU: Snapdragon 210 MSM8909 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Brand: Cat Model: S31 Device: CatS31 Platform: msm8909 Android version: 8.1.0 Display ID: LTE_S0201121.0_S31_1.020.00 Firmware version: LTE_S0201121.0_S31_1.020.00 Resetting FRP lock.. Searching for signatures... FRP lock is successfully reseted! Performed by 1.9.7.0 Software version.

11-14-2020, 13:26	#6270 (permalink)
tornado555 Freak Poster Join Date: Feb 2013 Location: Sudan-Khartoum Posts: 107 Member: 1890557 Status: Offline Thanks Meter: 9	p20 pro CLT-L29 FRP DONE BY TESTPOINT BY OCTOPUS FRP TOOL Platform: HUAWEI Selected model: CLT-L29 Put the phone into Factory mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint. Searching for a phone. Please wait... Found phone on COM3 Checking resource files... Downloading resources... Searching for a phone. Please wait... Found phone on COM3 Setting options... Writing BOOT... Downloading resources... Searching for a phone. Please wait... Found phone on COM3 Setting options... Writing BOOT... Downloading resources... Searching for a phone. Please wait... Found phone on COM3 Setting options... Writing BOOT... Downloading resources... Searching for a phone. Please wait... Found phone on COM3 Setting options... Writing BOOT... Switching to FastBoot mode... Searching for a phone. Please wait... Detected phone model: CLT-L29 Phone SN: WXXXXXXXXXXXX Phone IMEI: 867XXXXXXXXXXX Phone IMEI2: 867XXXXXXXXXX SW version: CLT-L29 9.1.0.383(C185E5R1P12) FRP lock is successfully reseted! Performed by 1.9.6.0 Software version.

11-03-2020, 20:24	#6257 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	Work ID: 0000000000236C4C Platform: HUAWEI Selected model: AMN-LX9 Put the phone into EDL mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint after 3-5 seconds. Searching for a phone. Please wait... Found phone on COM279 Port name: MediaTek USB Port_V1632 (COM279) Detecting Chip Version... HW Chip: MT6761: 0717.0000 HW Version: 8A00.CA01.0200.0000 Connecting... Brom Version: 05 BootLoader Version: FE Sending auth... Sending Auth Data... Target Config: 0x000000E5 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898, n.1 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... Mobile Status: SYNC Mobile Status: brom Sending BootLoader Info... Initializing Memory Flash.. Initialization successfully completed Sending loaders... Mobile Status: SYNC Reading Flash Info... EMMC rpmb size: 16 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 29820 Mb eMMC Flash: .90014A68.42386150.3E0196B7.30CCC691 eMMC Flash: Hynix: hB8aP> Internal RAM size: 512 Kb External RAM size: 2048 Mb Reading partition... Reading info... Searching for signatures... Resetting FRP lock.. Backup saved as HUAWEI_AMN-LX9_03-11-2020_21-22-32.dump file FRP lock is successfully reseted! Performed by 1.9.7.0 Software version.

11-03-2020, 20:26	#6258 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	Work ID: 000000000023696C Platform: HUAWEI Selected model: EVA-L19 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: EVA-L19 Phone SN: XVV7N17704000463 Phone IMEI: 868445025023480 Phone IMEI2: 868445025027481 SW version: EVA-L19C185B403 Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.9.7.0 Software version.

11-05-2020, 07:21	#6259 (permalink)
Yahia_Sb No Life Poster Join Date: Aug 2014 Posts: 658 Member: 2233266 Status: Offline Thanks Meter: 252	nokia 2.1-ta-1080 frp done Welcome to Octoplus FRP Tool v.1.9.7.0 Card S/N: 01009072 Work ID: 000000000012D2B9 Platform: NOKIA Selected model: TA-1080 Put the phone into EDL mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint after 3-5 seconds. No diagnostic ports found! Operation was failed! Performed by 1.9.7.0 Software version. Work ID: 000000000012D2CD Platform: NOKIA Selected model: TA-1080 Put the phone into EDL mode: 1. Attach testpoint as shown in Help manual; 2. Connect USB cable; 3. Release testpoint after 3-5 seconds. Found phone on COM20 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 000560E100000000 QC CPU: Snapdragon 425 MSM8917 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Android version: 10 Display ID: 00WW_4_11C Firmware version: 00WW_4_11C Resetting FRP lock.. Searching for signatures... FRP lock is successfully reseted! Performed by 1.9.7.0 Software version.

11-08-2020, 11:38	#6261 (permalink)
genci titi 2002 No Life Poster Join Date: Oct 2005 Location: TITI 2002 SERVIS CELULAR PG/AL Posts: 4,183 Member: 193804 Status: Offline Sonork: 100.1684818 Thanks Meter: 1,693	Work ID: 0000000000166DB6 Platform: TURBOX Selected model: FIRE 4G Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM13 Port name: MediaTek PreLoader USB VCOM (Android) (COM13) Detecting Chip Version... HW Chip: MT6737: 0335.0000 HW Version: 8A00.CB00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 02 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .70010045.48414345.4101138F.CA1B864B eMMC Flash: Pretec: EHACEA DA ver: 4.2.9B Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 14928 Mb Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Reading info... Brand: Turbox Model: Fire_4G Device: Fire_4G Android version: 8.1.0 Display ID: LF710T.O1.V10.8.JXX-V09.8735BD.M32.6960.20200313 Factory Reset... Formatting User Data section Factory Reset is successfully performed! Performed by 1.9.7.0 Software version.

11-09-2020, 10:46	#6262 (permalink)
we_fix_it Freak Poster Join Date: Jan 2017 Location: ALASKA Posts: 329 Member: 2678828 Status: Offline Thanks Meter: 231	octoplus team please add VFD510 in the list. is similar to VFD511 , but the phone back sticker is VFD510 . press and hold both volume and connect USB cable. Welcome to Octoplus FRP Tool v.1.9.7.0 Card S/N: 0201798A Work ID: 0000000000173AE8 Platform: VODAFONE Selected model: VFD511 Please, power phone OFF and connect USB cable. Found phone on COM12 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 009600E100040000 QC CPU: Snapdragon 210 MSM8909 QC SW VER: 00000000 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Brand: Vodafone Model: VFD 511 Device: VFD511 Platform: msm8909 Android version: 7.1.1 Display ID: VFD-51x_MRB06 Firmware version: 20190309.215534 Resetting FRP lock.. Searching for signatures... FRP lock is successfully reseted! Performed by 1.9.7.0 Software version.