🐙 Post here success Reset FRP story with Octoplus FRP Tool - Page 223 - GSM-Forum

pintu_das · 02-19-2019, 14:17

micromax B5 pro frp remove done with Selected model: MTK GENERAL

Platform: __GENERAL RESET FRP METHODS
Selected model: MTK GENERAL
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM10
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 02
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010047.4436424D.4201EFC6.D297A539
eMMC Flash: Samsung: GD6BMB
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 29820 Mb
Internal RAM size: 128 Kb
External RAM size: 3072 Mb
Reading partition...
Reading info...
Brand: Micromax
Model: Micromax B5 Pro
Device: B5_Pro
Android version: 8.1.0
Display ID: MMX_B5Pro_BD_SW_V04_HW_V4.1_20180717
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as Micromax_Micromax B5 Pro_19-02-2019_17-34-12.dump file
Performed by 1.6.3.0 Software version.

Thanks Octopus team

wahiditunes · 02-19-2019, 15:37

Welcome to Octoplus FRP Tool v.1.6.3.0
Platform: HUAWEI
Selected model: LDN-L21
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: LDN-L21
Phone SN: 26EBB18C04501428
Phone IMEI: 86196204837####
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.6.3.0 Software version.

wahiditunes · 02-19-2019, 15:37

Welcome to Octoplus FRP Tool v.1.6.3.0
Platform: HUAWEI
Selected model: LDN-L21
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: LDN-L21
Phone SN: 26EBB18C04501428
Phone IMEI: 86196204837####
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.6.3.0 Software version.

dan0007 · 02-19-2019, 17:18

Selected model: IT1556 PLUS
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM35
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Just5
Model: Just5
Device: Konrow
Platform: sc8830
Android version: 7.0
Display ID: Konrow-Just5-V02-20170818
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as ITEL_IT1556 PLUS_19-02-2019_16-09-25.dump file
Performed by 1.6.3.0 Software version.

djmurod86 · 02-20-2019, 07:01

INOI 3 LITE FRP DONE

Welcome to Octoplus FRP Tool v.1.6.2.0
Platform: INOI
Selected model: 3 LITE
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM44
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.00.00_SP, n.14
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .70010054.32323730.3801362D.A3DA550D
eMMC Flash: Pretec: T22708
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7296 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: INOI
Model: INOI_3_LITE
Device: INOI_3_LITE
Platform: mt6580
Android version: 7.0
Display ID: t939w_v2_o_tyc_gm50t1_v11
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as INOI_3 LITE_20-02-2019_10-50-50.dump file
Performed by 1.6.2.0 Software version.

djmurod86 · 02-20-2019, 07:01

INOI 3 LITE FRP DONE

Welcome to Octoplus FRP Tool v.1.6.2.0
Platform: INOI
Selected model: 3 LITE
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM44
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.00.00_SP, n.14
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .70010054.32323730.3801362D.A3DA550D
eMMC Flash: Pretec: T22708
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7296 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: INOI
Model: INOI_3_LITE
Device: INOI_3_LITE
Platform: mt6580
Android version: 7.0
Display ID: t939w_v2_o_tyc_gm50t1_v11
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as INOI_3 LITE_20-02-2019_10-50-50.dump file
Performed by 1.6.2.0 Software version.

louka · 02-20-2019, 11:46

Platform: HUAWEI
Selected model: TRT-L21A
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: TRT-L21A
Phone SN: VWD7N17815005392
Phone IMEI: 864753036337201
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.6.3.0 Software version.

louka · 02-20-2019, 11:47

Platform: HUAWEI
Selected model: AUM-L29
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: AUM-L29
Phone SN: QDG9X18610W07824
Phone IMEI: 867268039472746
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.6.3.0 Software version.

genci titi 2002 · 02-20-2019, 13:08

Welcome to Octoplus FRP Tool v.1.6.3.0
Platform: HUAWEI
Selected model: AGS-W09
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: AGS-W09
Phone SN: 4JPNU18308113058
Phone IMEI: 4JPNU18308113058
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.6.3.0 Software version.

gilus · 02-20-2019, 13:30

Welcome to Octoplus FRP Tool v.1.6.3.0
Platform: LENOVO
Selected model: YT3-850F
Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM76
Mode: Qualcomm 9008
Connecting...
Reading info...
QC HW ID: 009600E100000000
QC CPU: Snapdragon 210 MSM8909
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: Lenovo
Model: Lenovo YT3-850L
Device: YT3-850L
Platform: msm8909
Android version: 5.1.1
Display ID: YT3-850L_S000028_160316_ROW
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Rebooting phone
Backup saved as LENOVO_YT3-850F_20-02-2019_13-25-04.dump file
Performed by 1.6.3.0 Software version.

gilus · 02-20-2019, 13:31

Welcome to Octoplus FRP Tool v.1.6.3.0
Platform: MYPHONE
Selected model: C-SMART II
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
No diagnostic ports found!
Operation was failed!
Performed by 1.6.3.0 Software version.

Platform: MYPHONE
Selected model: C-SMART II
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM227
Detecting Chip Version...
HW Chip: MT6737: 0335.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 02
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010051.4536334D.42030B9A.96699A9F
eMMC Flash: Samsung: QE63MB
DA ver: 4.2.9B
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: myPhone
Model: Prime_18x9_LTE
Device: Prime_18x9_LTE
Android version: 8.1.0
Display ID: Prime_18x9_LTE
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as MYPHONE_C-SMART II_20-02-2019_09-14-08.dump file
Performed by 1.6.3.0 Software version.

louka · 02-20-2019, 15:23

Platform: SAMSUNG
Selected model: SM-J710F
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..success
FRP lock is successfully reseted!
Performed by 1.6.3.0 Software version.

MOBICOM · 02-20-2019, 16:19

Fastboot mode in help is misleading, we need to pres vol+ and insert usb cable or press power then in 3 options given to select fastboot mode

Code:

Platform: HUAWEI
Selected model: DUA-L22
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: DUA-L22
Phone SN: MNV9K18B27903137
Phone IMEI2: 868664045255662
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.6.3.0 Software version.

louka · 02-20-2019, 17:32

Platform: IRIS
INFO : 20/02/2019 17:27:21 > Selected model: VOX 4S
WARN : 20/02/2019 17:27:21 > Please, power phone OFF and connect USB cable.
INFO : 20/02/2019 17:27:21 > Searching for a phone. Please wait...
INFO : 20/02/2019 17:27:28 > Found phone on COM39
INFO : 20/02/2019 17:27:28 > Detecting Chip Version...
INFO : 20/02/2019 17:27:28 > HW Chip: MT6737: 0335.0000
INFO : 20/02/2019 17:27:28 > HW Version: 8A00.CA00.0000.0000
INFO : 20/02/2019 17:27:28 > Connecting...
INFO : 20/02/2019 17:27:28 > Brom Version: 05
INFO : 20/02/2019 17:27:28 > BootLoader Version: FE
INFO : 20/02/2019 17:27:28 > Sending auth...
INFO : 20/02/2019 17:27:28 > Searching Download Agent...
INFO : 20/02/2019 17:27:30 > Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10
INFO : 20/02/2019 17:27:30 > Sending Download Agent...
INFO : 20/02/2019 17:27:30 > DA sent successfully
INFO : 20/02/2019 17:27:30 > Initializing DA...
INFO : 20/02/2019 17:27:30 > Synchronizing with DA...
INFO : 20/02/2019 17:27:30 > NAND Flash: not installed
INFO : 20/02/2019 17:27:30 > eMMC Flash: .15010046.4E58324D.4201961F.E0B62DDD
INFO : 20/02/2019 17:27:30 > eMMC Flash: Samsung: FNX2MB
INFO : 20/02/2019 17:27:30 > DA ver: 4.2.9B
INFO : 20/02/2019 17:27:30 > Initializing Memory Flash..
INFO : 20/02/2019 17:27:32 > Sending BootLoader Info...
INFO : 20/02/2019 17:27:33 > Initialization successfully completed
INFO : 20/02/2019 17:27:34 > Sending loaders...
INFO : 20/02/2019 17:27:34 > Loader send successfuly.
INFO : 20/02/2019 17:27:34 > Reading Flash Info...
INFO : 20/02/2019 17:27:35 > EMMC rpmb size: 0 Mb
INFO : 20/02/2019 17:27:35 > EMMC boot1 size: 4 Mb
INFO : 20/02/2019 17:27:35 > EMMC boot2 size: 4 Mb
INFO : 20/02/2019 17:27:35 > EMMC gp1 size: 0 Mb
INFO : 20/02/2019 17:27:35 > EMMC gp2 size: 0 Mb
INFO : 20/02/2019 17:27:36 > EMMC gp3 size: 0 Mb
INFO : 20/02/2019 17:27:36 > EMMC gp4 size: 0 Mb
INFO : 20/02/2019 17:27:36 > EMMC user area size: 7456 Mb
INFO : 20/02/2019 17:27:36 > Internal RAM size: 128 Kb
INFO : 20/02/2019 17:27:36 > External RAM size: 1024 Mb
INFO : 20/02/2019 17:27:36 > Reading partition...
INFO : 20/02/2019 17:27:36 > Reading info...
INFO : 20/02/2019 17:27:36 > Brand: IRIS
INFO : 20/02/2019 17:27:36 > Model: VOX 4s
INFO : 20/02/2019 17:27:36 > Device: VOX_4s
INFO : 20/02/2019 17:27:36 > Platform: mt6737m
INFO : 20/02/2019 17:27:36 > Android version: 7.0
INFO : 20/02/2019 17:27:36 > Display ID: IRI_VOX_4s_V1.7
INFO : 20/02/2019 17:27:36 > Searching for signatures...
INFO : 20/02/2019 17:27:36 > Resetting FRP lock..
WARN : 20/02/2019 17:27:36 > FRP lock is successfully reseted!
INFO : 20/02/2019 17:27:36 > Backup saved as IRIS_VOX 4S_20-02-2019_17-27-35.dump file
Performed by 1.6.3.0 Software version.

knowlogy · 02-21-2019, 10:48

Platform: SAMSUNG
Selected model: SM-G610F
Searching for a phone (waiting for ADB device)...
Reading info...
Detected phone model: SM-S320VL
Firmware compiled date: Thu Jul 7 19:06:15 KST 2016
PDA version: S320VLUDU1APG2
CSC version: S320VLTFN1APG2
SW version: S320VLUDU1APG2
Phone SN: R28H816WJHK
Android version: 6.0.1 (MMB29M)
Sales code: TFN
Country: USA
HW platform: msm8916
HW Chip: MSM8916
HW Modem: MSM8916
Security patch level: 2016-06-01
Codename: j3ltetfnvzw
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data reset"
Performed by 1.6.2.0 Software version.

02-19-2019, 14:17	#3331 (permalink)
pintu_das No Life Poster Join Date: Jan 2015 Location: Narsingdi, Dhaka, Bangladesh Age: 28 Posts: 2,207 Member: 2325851 Status: Offline Sonork: 100.1680491 Thanks Meter: 2,363	micromax B5 pro frp remove done with Selected model: MTK GENERAL micromax B5 pro frp remove done with Selected model: MTK GENERAL Platform: __GENERAL RESET FRP METHODS Selected model: MTK GENERAL Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM10 Detecting Chip Version... HW Chip: MT6737: 0335.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 02 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010047.4436424D.4201EFC6.D297A539 eMMC Flash: Samsung: GD6BMB DA ver: 4.2.9B Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 29820 Mb Internal RAM size: 128 Kb External RAM size: 3072 Mb Reading partition... Reading info... Brand: Micromax Model: Micromax B5 Pro Device: B5_Pro Android version: 8.1.0 Display ID: MMX_B5Pro_BD_SW_V04_HW_V4.1_20180717 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as Micromax_Micromax B5 Pro_19-02-2019_17-34-12.dump file Performed by 1.6.3.0 Software version. Thanks Octopus team

02-19-2019, 17:18	#3334 (permalink)
dan0007 Freak Poster Join Date: Aug 2003 Location: Abidjan Posts: 460 Member: 38050 Status: Offline Thanks Meter: 61	KONROW model JUST5 frp reset by selecting Itel1556+ Selected model: IT1556 PLUS Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM35 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Brand: Just5 Model: Just5 Device: Konrow Platform: sc8830 Android version: 7.0 Display ID: Konrow-Just5-V02-20170818 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as ITEL_IT1556 PLUS_19-02-2019_16-09-25.dump file Performed by 1.6.3.0 Software version.

02-20-2019, 11:46	#3337 (permalink)
louka No Life Poster Join Date: Nov 2005 Posts: 947 Member: 198016 Status: Offline Sonork: 100.1602918 Thanks Meter: 408	HUAWEI TRT-L21A FRP lock is successfully reseted Platform: HUAWEI Selected model: TRT-L21A Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: TRT-L21A Phone SN: VWD7N17815005392 Phone IMEI: 864753036337201 Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.6.3.0 Software version.

02-20-2019, 11:47	#3338 (permalink)
louka No Life Poster Join Date: Nov 2005 Posts: 947 Member: 198016 Status: Offline Sonork: 100.1602918 Thanks Meter: 408	HUAWEI AUM-L29 FRP lock is successfully reseted Platform: HUAWEI Selected model: AUM-L29 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: AUM-L29 Phone SN: QDG9X18610W07824 Phone IMEI: 867268039472746 Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.6.3.0 Software version.

02-20-2019, 13:08	#3339 (permalink)
genci titi 2002 No Life Poster Join Date: Oct 2005 Location: TITI 2002 SERVIS CELULAR PG/AL Posts: 4,183 Member: 193804 Status: Offline Sonork: 100.1684818 Thanks Meter: 1,693	AGS-W09 FRP lock is successfully reseted! Welcome to Octoplus FRP Tool v.1.6.3.0 Platform: HUAWEI Selected model: AGS-W09 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: AGS-W09 Phone SN: 4JPNU18308113058 Phone IMEI: 4JPNU18308113058 Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.6.3.0 Software version.

02-19-2019, 15:37	#3332 (permalink)
wahiditunes Freak Poster Join Date: Jun 2017 Location: SAUDI ARABIA RIYADH Posts: 358 Member: 2725078 Status: Offline Sonork: 1680162 Thanks Meter: 173	Welcome to Octoplus FRP Tool v.1.6.3.0 Platform: HUAWEI Selected model: LDN-L21 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: LDN-L21 Phone SN: 26EBB18C04501428 Phone IMEI: 86196204837#### Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.6.3.0 Software version.

02-19-2019, 15:37	#3333 (permalink)
wahiditunes Freak Poster Join Date: Jun 2017 Location: SAUDI ARABIA RIYADH Posts: 358 Member: 2725078 Status: Offline Sonork: 1680162 Thanks Meter: 173	Welcome to Octoplus FRP Tool v.1.6.3.0 Platform: HUAWEI Selected model: LDN-L21 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: LDN-L21 Phone SN: 26EBB18C04501428 Phone IMEI: 86196204837#### Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.6.3.0 Software version.

02-20-2019, 07:01	#3335 (permalink)
djmurod86 No Life Poster Join Date: Feb 2007 Location: Inside Posts: 4,133 Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993	INOI 3 LITE FRP DONE Welcome to Octoplus FRP Tool v.1.6.2.0 Platform: INOI Selected model: 3 LITE Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM44 Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.00.00_SP, n.14 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .70010054.32323730.3801362D.A3DA550D eMMC Flash: Pretec: T22708 DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7296 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: INOI Model: INOI_3_LITE Device: INOI_3_LITE Platform: mt6580 Android version: 7.0 Display ID: t939w_v2_o_tyc_gm50t1_v11 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as INOI_3 LITE_20-02-2019_10-50-50.dump file Performed by 1.6.2.0 Software version.

02-20-2019, 07:01	#3336 (permalink)
djmurod86 No Life Poster Join Date: Feb 2007 Location: Inside Posts: 4,133 Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993	INOI 3 LITE FRP DONE Welcome to Octoplus FRP Tool v.1.6.2.0 Platform: INOI Selected model: 3 LITE Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM44 Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.00.00_SP, n.14 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .70010054.32323730.3801362D.A3DA550D eMMC Flash: Pretec: T22708 DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7296 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: INOI Model: INOI_3_LITE Device: INOI_3_LITE Platform: mt6580 Android version: 7.0 Display ID: t939w_v2_o_tyc_gm50t1_v11 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as INOI_3 LITE_20-02-2019_10-50-50.dump file Performed by 1.6.2.0 Software version.

02-20-2019, 13:30	#3340 (permalink)
gilus Insane Poster Join Date: May 2003 Location: Poland Sosnowiec Posts: 99 Member: 29442 Status: Offline Thanks Meter: 12	Lenovo YT3-850L FRP Done Welcome to Octoplus FRP Tool v.1.6.3.0 Platform: LENOVO Selected model: YT3-850F Please, power phone OFF, press and hold "Vol+" and "Vol-" buttons and connect USB cable. Searching for a phone. Please wait... Found phone on COM76 Mode: Qualcomm 9008 Connecting... Reading info... QC HW ID: 009600E100000000 QC CPU: Snapdragon 210 MSM8909 Searching loader... Sending loaders... Loader send successfuly. Reconnecting... Checking request.. Reading partition... Reading info... Brand: Lenovo Model: Lenovo YT3-850L Device: YT3-850L Platform: msm8909 Android version: 5.1.1 Display ID: YT3-850L_S000028_160316_ROW Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Rebooting phone Backup saved as LENOVO_YT3-850F_20-02-2019_13-25-04.dump file Performed by 1.6.3.0 Software version.

02-20-2019, 13:31	#3341 (permalink)
gilus Insane Poster Join Date: May 2003 Location: Poland Sosnowiec Posts: 99 Member: 29442 Status: Offline Thanks Meter: 12	myPhone Prime_18x9_LTE FRP Done Welcome to Octoplus FRP Tool v.1.6.3.0 Platform: MYPHONE Selected model: C-SMART II Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... No diagnostic ports found! Operation was failed! Performed by 1.6.3.0 Software version. Platform: MYPHONE Selected model: C-SMART II Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM227 Detecting Chip Version... HW Chip: MT6737: 0335.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 02 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010051.4536334D.42030B9A.96699A9F eMMC Flash: Samsung: QE63MB DA ver: 4.2.9B Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 14910 Mb Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Reading info... Brand: myPhone Model: Prime_18x9_LTE Device: Prime_18x9_LTE Android version: 8.1.0 Display ID: Prime_18x9_LTE Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as MYPHONE_C-SMART II_20-02-2019_09-14-08.dump file Performed by 1.6.3.0 Software version.

02-20-2019, 15:23	#3342 (permalink)
louka No Life Poster Join Date: Nov 2005 Posts: 947 Member: 198016 Status: Offline Sonork: 100.1602918 Thanks Meter: 408	SAMSUNG SM-J710F FRP lock is successfully reseted Platform: SAMSUNG Selected model: SM-J710F Searching for UART interface.. COM5 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation...OK Searching for UART interface.. COM5 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock (1/4 attempt)..success FRP lock is successfully reseted! Performed by 1.6.3.0 Software version.

02-20-2019, 17:32	#3344 (permalink)
louka No Life Poster Join Date: Nov 2005 Posts: 947 Member: 198016 Status: Offline Sonork: 100.1602918 Thanks Meter: 408	IRIS VOX 4S FRP lock is successfully reseted Platform: IRIS INFO : 20/02/2019 17:27:21 > Selected model: VOX 4S WARN : 20/02/2019 17:27:21 > Please, power phone OFF and connect USB cable. INFO : 20/02/2019 17:27:21 > Searching for a phone. Please wait... INFO : 20/02/2019 17:27:28 > Found phone on COM39 INFO : 20/02/2019 17:27:28 > Detecting Chip Version... INFO : 20/02/2019 17:27:28 > HW Chip: MT6737: 0335.0000 INFO : 20/02/2019 17:27:28 > HW Version: 8A00.CA00.0000.0000 INFO : 20/02/2019 17:27:28 > Connecting... INFO : 20/02/2019 17:27:28 > Brom Version: 05 INFO : 20/02/2019 17:27:28 > BootLoader Version: FE INFO : 20/02/2019 17:27:28 > Sending auth... INFO : 20/02/2019 17:27:28 > Searching Download Agent... INFO : 20/02/2019 17:27:30 > Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.10 INFO : 20/02/2019 17:27:30 > Sending Download Agent... INFO : 20/02/2019 17:27:30 > DA sent successfully INFO : 20/02/2019 17:27:30 > Initializing DA... INFO : 20/02/2019 17:27:30 > Synchronizing with DA... INFO : 20/02/2019 17:27:30 > NAND Flash: not installed INFO : 20/02/2019 17:27:30 > eMMC Flash: .15010046.4E58324D.4201961F.E0B62DDD INFO : 20/02/2019 17:27:30 > eMMC Flash: Samsung: FNX2MB INFO : 20/02/2019 17:27:30 > DA ver: 4.2.9B INFO : 20/02/2019 17:27:30 > Initializing Memory Flash.. INFO : 20/02/2019 17:27:32 > Sending BootLoader Info... INFO : 20/02/2019 17:27:33 > Initialization successfully completed INFO : 20/02/2019 17:27:34 > Sending loaders... INFO : 20/02/2019 17:27:34 > Loader send successfuly. INFO : 20/02/2019 17:27:34 > Reading Flash Info... INFO : 20/02/2019 17:27:35 > EMMC rpmb size: 0 Mb INFO : 20/02/2019 17:27:35 > EMMC boot1 size: 4 Mb INFO : 20/02/2019 17:27:35 > EMMC boot2 size: 4 Mb INFO : 20/02/2019 17:27:35 > EMMC gp1 size: 0 Mb INFO : 20/02/2019 17:27:35 > EMMC gp2 size: 0 Mb INFO : 20/02/2019 17:27:36 > EMMC gp3 size: 0 Mb INFO : 20/02/2019 17:27:36 > EMMC gp4 size: 0 Mb INFO : 20/02/2019 17:27:36 > EMMC user area size: 7456 Mb INFO : 20/02/2019 17:27:36 > Internal RAM size: 128 Kb INFO : 20/02/2019 17:27:36 > External RAM size: 1024 Mb INFO : 20/02/2019 17:27:36 > Reading partition... INFO : 20/02/2019 17:27:36 > Reading info... INFO : 20/02/2019 17:27:36 > Brand: IRIS INFO : 20/02/2019 17:27:36 > Model: VOX 4s INFO : 20/02/2019 17:27:36 > Device: VOX_4s INFO : 20/02/2019 17:27:36 > Platform: mt6737m INFO : 20/02/2019 17:27:36 > Android version: 7.0 INFO : 20/02/2019 17:27:36 > Display ID: IRI_VOX_4s_V1.7 INFO : 20/02/2019 17:27:36 > Searching for signatures... INFO : 20/02/2019 17:27:36 > Resetting FRP lock.. WARN : 20/02/2019 17:27:36 > FRP lock is successfully reseted! INFO : 20/02/2019 17:27:36 > Backup saved as IRIS_VOX 4S_20-02-2019_17-27-35.dump file Performed by 1.6.3.0 Software version.

02-21-2019, 10:48	#3345 (permalink)
knowlogy Freak Poster Join Date: Mar 2014 Location: all over the world Age: 27 Posts: 123 Member: 2152577 Status: Offline Sonork: knowlogyman Thanks Meter: 20	samsung S320VL frp done Platform: SAMSUNG Selected model: SM-G610F Searching for a phone (waiting for ADB device)... Reading info... Detected phone model: SM-S320VL Firmware compiled date: Thu Jul 7 19:06:15 KST 2016 PDA version: S320VLUDU1APG2 CSC version: S320VLTFN1APG2 SW version: S320VLUDU1APG2 Phone SN: R28H816WJHK Android version: 6.0.1 (MMB29M) Sales code: TFN Country: USA HW platform: msm8916 HW Chip: MSM8916 HW Modem: MSM8916 Security patch level: 2016-06-01 Codename: j3ltetfnvzw Resetting FRP lock.. FRP lock is successfully reseted! Goto "Menu->Settings->Backup and reset" and make "Factory data reset" Performed by 1.6.2.0 Software version.