🐙 Post here success Reset FRP story with Octoplus FRP Tool - Page 248 - GSM-Forum

md_amin · 03-28-2019, 10:18

MOTOROLA XT1072 FRP reset successfully

Welcome to Octoplus FRP Tool v.1.6.4.0
Platform: MOTOROLA
Selected model: XT1072
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model:
Firmware released date:
Firmware released time:
Firmware compiled date:
Firmware compiled time:
SW version:
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Searching for a phone (waiting for ADB device)...
ADB server killed.
Please, press "OK" button on the phone to allow USB debugging..
Phone found.
Reading info...
Phone model: motorola XT1072
SW version: MPBS24.65-34-5
Date: Sat Sep 10 01:42:19 CDT 2016
Android version: 6.0
Baseband M8926_309101.02.03.19R THEA_EMEA_CUST
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.6.4.0 Software version.

wahiditunes · 03-28-2019, 12:42

Platform: LENOVO
Selected model: TB3-710I
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM106
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .15010046.4531324D.4207D285.A859B337
eMMC Flash: Samsung: FE12MB
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14910 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: Lenovo
Model: Lenovo TB3-710I
Device: TB3-710I
Platform: mt6580
Android version: 5.1
Display ID: TB3-710I_S000033_161128_ROW
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as LENOVO_TB3-710I_28-03-2019_14-32-07.dump file
Performed by 1.6.8.0 Software version.

djmurod86 · 03-28-2019, 12:50

Platform: __GENERAL RESET FRP METHODS
Selected model: ADB
Searching for a phone (waiting for ADB device)...
Please, press "OK" button on the phone to allow USB debugging..
Phone found.
Reading info...
Phone model: Sony F3112
SW version: 33.3.A.1.97
Date: Fri Sep 15 04:41:21 CST 2017
Android version: 7.0
Baseband MOLY.LR11.W1603.MD.TC9.SP.V47, 2017/08/23 00:19
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.6.8.0 Software version.

apacheadmiral · 03-28-2019, 15:05

HISENSE U601S PRO FRP lock is successfully reseted!

Platform: HISENSE
Selected model: U601S PRO
Please, power phone OFF, press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM740
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Hisense
Model: U601S Pro
Device: HS7731CSP
Platform: sc8830
Android version: 7.0
Display ID: Hisense_U601S_Pro_S01_20180420
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HISENSE_U601S PRO_28-03-2019_16-03-14.dump file
Performed by 1.6.8.0 Software version.

apacheadmiral · 03-28-2019, 15:06

HISENSE U601S PRO FRP lock is successfully reseted!

Platform: HISENSE
Selected model: U601S PRO
Please, power phone OFF, press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM740
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Hisense
Model: U601S Pro
Device: HS7731CSP
Platform: sc8830
Android version: 7.0
Display ID: Hisense_U601S_Pro_S01_20180420
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as HISENSE_U601S PRO_28-03-2019_16-03-14.dump file
Performed by 1.6.8.0 Software version.

Gsm_Flash Baba · 03-29-2019, 09:26

World 1st Lava LH9810 FRP Remove Done One Click By Octopus FRP

Platform: __GENERAL RESET FRP METHODS
Selected model: SC7731E SIGN V2
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM17
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: LAVA
Model: LH9810
Device: LH9810
Android version: 8.1.0
Display ID: Lava_LH9810_INT_S106_18L15
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Dump File GENERAL RESET FRP METHODS_SC7731E SIGN V2_29-03-2019_14-16-43.dump file
Performed by 1.6.8.0 Software version.

apacheadmiral · 03-29-2019, 10:11

HUAWEI WAS-LX1 FRP lock is successfully reseted!

Welcome to Octoplus FRP Tool v.1.6.8.0
Platform: HUAWEI
Selected model: WAS-LX1
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: WAS-LX1
Phone SN: PAG4C17A17010563
Phone IMEI: 864038035169353
Phone IMEI2: 000000000000000
SW version: WAS-LX1C02B141
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.6.8.0 Software version.

wahiditunes · 03-29-2019, 11:37

Welcome to Octoplus FRP Tool v.1.6.8.0
Platform: HUAWEI
Selected model: BLN-L21
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: BLN-L21
Phone SN: 6AGDU18116001948
Phone IMEI: 8682160303####
Phone IMEI2: 8682160303####
SW version: BLN-L21C185B390
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.6.8.0 Software version.

Dr_Wolodya · 03-29-2019, 12:57

UMI ROME X Reset FRP successfully done:

Code:

Welcome to Octoplus FRP Tool v.1.6.8.0
Platform: UMI
Selected model: ROME X
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM19
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .70010056.31303030.3850112E.49CEB269
eMMC Flash: Pretec: V10008
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7216 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: UMI
Model: ROME_X
Device: ROME_X
Platform: mt6580
Android version: 5.1
Display ID: UMI ROME X.V3.01_20160120
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as UMI_ROME X_29-03-2019_13-46-46.dump file
Performed by 1.6.8.0 Software version.

Yahia_Sb · 03-29-2019, 15:31

Welcome to Octoplus FRP Tool v.1.6.7.0
Platform: WALTON
Selected model: PRIMO GH7
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM4
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_Octoplus_Mobicel_v.1, n.0
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .90014A48.38473461.32A54F12.DA7F6401
eMMC Flash: Hynix: H8G4a2
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 7456 Mb
Internal RAM size: 128 Kb
External RAM size: 1024 Mb
Reading partition...
Reading info...
Brand: WALTON
Model: Primo GH7
Device: k300
Platform: mt6580
Android version: 7.0
Display ID: alps-mp-n0.mp2-V1_6580.we.n_P136
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as WALTON_PRIMO GH7_29-03-2019_20-28-37.dump file
Performed by 1.6.7.0 Software version.

pintu_das · 03-29-2019, 15:39

symphony v75 sc8830 frp remove done with Selected model: SC7731 V4

Platform: __GENERAL RESET FRP METHODS
Selected model: SC7731 V4
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM32
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: Symphony
Model: V75
Device: V75
Platform: sc8830
Android version: 6.0
Custom build version: V75_HW2_V19
Internal build version: V2808AN_6.0_SYM_BD_BR1_05
Display ID: MRA58K release-keys
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as __GENERAL RESET FRP METHODS_SC7731 V4_29-03-2019_19-58-06.dump file
Performed by 1.6.8.0 Software version.

Thanks Octoups team

nadim electro · 03-29-2019, 17:05

Platform: HUAWEI
Selected model: SCL-U31
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: SCL-U31
Phone SN: 8BG7S15C080xxxxx
Connecting to server..OK
Authorizing...OK
Resetting FRP lock..
If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually.
FRP lock is successfully reseted!
Performed by 1.6.7.0 Software version

crisgar520 · 03-29-2019, 19:28

Platform: __GENERAL RESET FRP METHODS
Selected model: SC7731E SIGN V3
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM8
Connecting...
Mobile Status: SPRD3
Sending preloader...
Operation was failed!
Performed by 1.6.6.0 Software version.

Platform: __GENERAL RESET FRP METHODS
Selected model: SC7731E SIGN V1
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM8
Connecting...
Mobile Status: SPRD3
Sending preloader...
Operation was failed!
Performed by 1.6.6.0 Software version.

Platform: __GENERAL RESET FRP METHODS
Selected model: SC7731 V8
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM8
Connecting...
Mobile Status: SPRD3
Sending preloader...
Operation was failed!
Performed by 1.6.6.0 Software version.

Platform: __GENERAL RESET FRP METHODS
Selected model: SC9850
Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM8
Connecting...
Mobile Status: SPRD3
Sending preloader...
Mobile Status: Spreadtrum Boot Block version 1.1
Sending mainloader...
Reading info...
Brand: SKY
Model: Elite Go
Device: Elite_Go_HN
Android version: 8.1.0
Display ID: Elite_Go_TIGO_Honduras_8.1_V03_20181204
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as __GENERAL RESET FRP METHODS_SC9850_29-03-2019_12-05-21.dump file
Performed by 1.6.6.0 Software version.

Yahia_Sb · 03-30-2019, 06:12

Welcome to Octoplus FRP Tool v.1.6.7.0
Platform: SYMPHONY
Selected model: I70
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM4
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .70010045.48414345.410119F1.3106A497
eMMC Flash: Pretec: EHACEA
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14592 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: Symphony
Model: i70
Device: i70
Platform: mt6580
Android version: 7.0
Display ID: i70_HW1_V7
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as SYMPHONY_I70_30-03-2019_10-45-23.dump file
Performed by 1.6.7.0 Software version.

Yahia_Sb · 03-30-2019, 06:12

Welcome to Octoplus FRP Tool v.1.6.7.0
Platform: SYMPHONY
Selected model: I70
Please, power phone OFF and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM4
Detecting Chip Version...
HW Chip: MT6580: 6580.0000
HW Version: 8A00.CA00.0000.0000
Connecting...
Brom Version: FF
BootLoader Version: 01
Searching Download Agent...
Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11
Sending Download Agent...
DA sent successfully
Initializing DA...
Synchronizing with DA...
NAND Flash: not installed
eMMC Flash: .70010045.48414345.410119F1.3106A497
eMMC Flash: Pretec: EHACEA
DA ver: 4.2.9C
Initializing Memory Flash..
Initialization successfully completed
Sending loaders...
Loader send successfuly.
Reading Flash Info...
EMMC rpmb size: 4 Mb
EMMC boot1 size: 4 Mb
EMMC boot2 size: 4 Mb
EMMC gp1 size: 0 Mb
EMMC gp2 size: 0 Mb
EMMC gp3 size: 0 Mb
EMMC gp4 size: 0 Mb
EMMC user area size: 14592 Mb
Internal RAM size: 128 Kb
External RAM size: 2048 Mb
Reading partition...
Reading info...
Brand: Symphony
Model: i70
Device: i70
Platform: mt6580
Android version: 7.0
Display ID: i70_HW1_V7
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Backup saved as SYMPHONY_I70_30-03-2019_10-45-23.dump file
Performed by 1.6.7.0 Software version.

03-28-2019, 12:50	#3708 (permalink)
djmurod86 No Life Poster Join Date: Feb 2007 Location: Inside Posts: 4,133 Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993	Sony F3112 Reset FRP DONE Platform: __GENERAL RESET FRP METHODS Selected model: ADB Searching for a phone (waiting for ADB device)... Please, press "OK" button on the phone to allow USB debugging.. Phone found. Reading info... Phone model: Sony F3112 SW version: 33.3.A.1.97 Date: Fri Sep 15 04:41:21 CST 2017 Android version: 7.0 Baseband MOLY.LR11.W1603.MD.TC9.SP.V47, 2017/08/23 00:19 Resetting FRP lock.. FRP lock is successfully reseted! Performed by 1.6.8.0 Software version.

03-29-2019, 09:26	#3711 (permalink)
Gsm_Flash Baba Insane Poster Join Date: Aug 2017 Location: Dhaka. Bangladesh Posts: 83 Member: 2743172 Status: Offline Sonork: Gsmhosting Thanks Meter: 39	World 1st Lava LH9810 FRP Remove Done One Click By Octopus FRP World 1st Lava LH9810 FRP Remove Done One Click By Octopus FRP Platform: __GENERAL RESET FRP METHODS Selected model: SC7731E SIGN V2 Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM17 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Brand: LAVA Model: LH9810 Device: LH9810 Android version: 8.1.0 Display ID: Lava_LH9810_INT_S106_18L15 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Dump File GENERAL RESET FRP METHODS_SC7731E SIGN V2_29-03-2019_14-16-43.dump file Performed by 1.6.8.0 Software version.

03-29-2019, 15:39	#3716 (permalink)
pintu_das No Life Poster Join Date: Jan 2015 Location: Narsingdi, Dhaka, Bangladesh Age: 28 Posts: 2,207 Member: 2325851 Status: Offline Sonork: 100.1680491 Thanks Meter: 2,363	symphony v75 sc8830 frp remove done with Selected model: SC7731 V4 symphony v75 sc8830 frp remove done with Selected model: SC7731 V4 Platform: __GENERAL RESET FRP METHODS Selected model: SC7731 V4 Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM32 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Brand: Symphony Model: V75 Device: V75 Platform: sc8830 Android version: 6.0 Custom build version: V75_HW2_V19 Internal build version: V2808AN_6.0_SYM_BD_BR1_05 Display ID: MRA58K release-keys Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as __GENERAL RESET FRP METHODS_SC7731 V4_29-03-2019_19-58-06.dump file Performed by 1.6.8.0 Software version. Thanks Octoups team

03-29-2019, 17:05	#3717 (permalink)
nadim electro No Life Poster Join Date: Oct 2006 Location: pakistan Posts: 669 Member: 361094 Status: Offline Sonork: 100.1597521 Thanks Meter: 172	huawei SCL-U31 frp reset done Platform: HUAWEI Selected model: SCL-U31 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: SCL-U31 Phone SN: 8BG7S15C080xxxxx Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.6.7.0 Software version

03-29-2019, 19:28	#3718 (permalink)
crisgar520 Junior Member Join Date: Jan 2011 Posts: 24 Member: 1483535 Status: Offline Sonork: 5404 Thanks Meter: 7	sky elite go Platform: __GENERAL RESET FRP METHODS Selected model: SC7731E SIGN V3 Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM8 Connecting... Mobile Status: SPRD3 Sending preloader... Operation was failed! Performed by 1.6.6.0 Software version. Platform: __GENERAL RESET FRP METHODS Selected model: SC7731E SIGN V1 Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM8 Connecting... Mobile Status: SPRD3 Sending preloader... Operation was failed! Performed by 1.6.6.0 Software version. Platform: __GENERAL RESET FRP METHODS Selected model: SC7731 V8 Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM8 Connecting... Mobile Status: SPRD3 Sending preloader... Operation was failed! Performed by 1.6.6.0 Software version. Platform: __GENERAL RESET FRP METHODS Selected model: SC9850 Please, reconnect battery, press and hold "Vol+" or "Vol-" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM8 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Brand: SKY Model: Elite Go Device: Elite_Go_HN Android version: 8.1.0 Display ID: Elite_Go_TIGO_Honduras_8.1_V03_20181204 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as __GENERAL RESET FRP METHODS_SC9850_29-03-2019_12-05-21.dump file Performed by 1.6.6.0 Software version.

03-28-2019, 10:18	#3706 (permalink)
md_amin No Life Poster Join Date: Jan 2010 Location: Bangladesh Age: 34 Posts: 686 Member: 1217931 Status: Offline Sonork: 100.1604251 Thanks Meter: 267	MOTOROLA XT1072 FRP reset successfully Welcome to Octoplus FRP Tool v.1.6.4.0 Platform: MOTOROLA Selected model: XT1072 Put the phone into Factory Mode: 1. Power phone OFF; 2. Press and hold "Vol-" + "Power" buttons; 3. Select Factory Mode, then confirm your selection; 4. Wait until the phone Power ON; 5. Connect USB cable. Searching for a phone. Please wait... Phone found. Reading info... Phone model: Firmware released date: Firmware released time: Firmware compiled date: Firmware compiled time: SW version: Enabling "USB Debugging" mode... Put the phone in Factory Mode: 1. Disconnect USB cable; 2. Power OFF the phone; 3. Press "Vol-" and "Power" buttons; 4. Select Factory Mode then confirm your selection; 5. Wait until phone is power ON and connect USB Cable; 6. Install necesarry drivers then press "OK" button Searching for a phone (waiting for ADB device)... ADB server killed. Please, press "OK" button on the phone to allow USB debugging.. Phone found. Reading info... Phone model: motorola XT1072 SW version: MPBS24.65-34-5 Date: Sat Sep 10 01:42:19 CDT 2016 Android version: 6.0 Baseband M8926_309101.02.03.19R THEA_EMEA_CUST Resetting FRP lock.. FRP lock is successfully reseted! Performed by 1.6.4.0 Software version.

03-28-2019, 12:42	#3707 (permalink)
wahiditunes Freak Poster Join Date: Jun 2017 Location: SAUDI ARABIA RIYADH Posts: 358 Member: 2725078 Status: Offline Sonork: 1680162 Thanks Meter: 173	Platform: LENOVO Selected model: TB3-710I Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM106 Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .15010046.4531324D.4207D285.A859B337 eMMC Flash: Samsung: FE12MB DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 14910 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: Lenovo Model: Lenovo TB3-710I Device: TB3-710I Platform: mt6580 Android version: 5.1 Display ID: TB3-710I_S000033_161128_ROW Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as LENOVO_TB3-710I_28-03-2019_14-32-07.dump file Performed by 1.6.8.0 Software version.

03-28-2019, 15:05	#3709 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	HISENSE U601S PRO FRP lock is successfully reseted! Platform: HISENSE Selected model: U601S PRO Please, power phone OFF, press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM740 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Brand: Hisense Model: U601S Pro Device: HS7731CSP Platform: sc8830 Android version: 7.0 Display ID: Hisense_U601S_Pro_S01_20180420 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as HISENSE_U601S PRO_28-03-2019_16-03-14.dump file Performed by 1.6.8.0 Software version.

03-28-2019, 15:06	#3710 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	HISENSE U601S PRO FRP lock is successfully reseted! Platform: HISENSE Selected model: U601S PRO Please, power phone OFF, press and hold "Vol+" button and connect USB cable. Searching for a phone. Please wait... Found phone on COM740 Connecting... Mobile Status: SPRD3 Sending preloader... Mobile Status: Spreadtrum Boot Block version 1.1 Sending mainloader... Reading info... Brand: Hisense Model: U601S Pro Device: HS7731CSP Platform: sc8830 Android version: 7.0 Display ID: Hisense_U601S_Pro_S01_20180420 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as HISENSE_U601S PRO_28-03-2019_16-03-14.dump file Performed by 1.6.8.0 Software version.

03-29-2019, 10:11	#3712 (permalink)
apacheadmiral No Life Poster Join Date: Apr 2008 Location: South Africa Posts: 708 Member: 746586 Status: Offline Thanks Meter: 205	HUAWEI WAS-LX1 FRP lock is successfully reseted! Welcome to Octoplus FRP Tool v.1.6.8.0 Platform: HUAWEI Selected model: WAS-LX1 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: WAS-LX1 Phone SN: PAG4C17A17010563 Phone IMEI: 864038035169353 Phone IMEI2: 000000000000000 SW version: WAS-LX1C02B141 Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.6.8.0 Software version.

03-29-2019, 11:37	#3713 (permalink)
wahiditunes Freak Poster Join Date: Jun 2017 Location: SAUDI ARABIA RIYADH Posts: 358 Member: 2725078 Status: Offline Sonork: 1680162 Thanks Meter: 173	Welcome to Octoplus FRP Tool v.1.6.8.0 Platform: HUAWEI Selected model: BLN-L21 Put the phone in FastBoot Mode: 1. Remove SD and SIM cards from the phone 2. Power phone OFF 3. Press and hold "Vol-" and insert USB cable 4. Wait until the phone enter in FastBoot Mode Searching for a phone. Please wait... Detected phone model: BLN-L21 Phone SN: 6AGDU18116001948 Phone IMEI: 8682160303#### Phone IMEI2: 8682160303#### SW version: BLN-L21C185B390 Connecting to server..OK Authorizing...OK Resetting FRP lock.. If the device didn't reboot automatically, try to reconnect USB cable or re-boot it manually. FRP lock is successfully reseted! Performed by 1.6.8.0 Software version.

03-29-2019, 15:31	#3715 (permalink)
Yahia_Sb No Life Poster Join Date: Aug 2014 Posts: 658 Member: 2233266 Status: Offline Thanks Meter: 252	Welcome to Octoplus FRP Tool v.1.6.7.0 Platform: WALTON Selected model: PRIMO GH7 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM4 Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_Octoplus_Mobicel_v.1, n.0 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .90014A48.38473461.32A54F12.DA7F6401 eMMC Flash: Hynix: H8G4a2 DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 7456 Mb Internal RAM size: 128 Kb External RAM size: 1024 Mb Reading partition... Reading info... Brand: WALTON Model: Primo GH7 Device: k300 Platform: mt6580 Android version: 7.0 Display ID: alps-mp-n0.mp2-V1_6580.we.n_P136 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as WALTON_PRIMO GH7_29-03-2019_20-28-37.dump file Performed by 1.6.7.0 Software version.

03-30-2019, 06:12	#3719 (permalink)
Yahia_Sb No Life Poster Join Date: Aug 2014 Posts: 658 Member: 2233266 Status: Offline Thanks Meter: 252	Welcome to Octoplus FRP Tool v.1.6.7.0 Platform: SYMPHONY Selected model: I70 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM4 Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .70010045.48414345.410119F1.3106A497 eMMC Flash: Pretec: EHACEA DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 14592 Mb Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Reading info... Brand: Symphony Model: i70 Device: i70 Platform: mt6580 Android version: 7.0 Display ID: i70_HW1_V7 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as SYMPHONY_I70_30-03-2019_10-45-23.dump file Performed by 1.6.7.0 Software version.

03-30-2019, 06:12	#3720 (permalink)
Yahia_Sb No Life Poster Join Date: Aug 2014 Posts: 658 Member: 2233266 Status: Offline Thanks Meter: 252	Welcome to Octoplus FRP Tool v.1.6.7.0 Platform: SYMPHONY Selected model: I70 Please, power phone OFF and connect USB cable. Searching for a phone. Please wait... Found phone on COM4 Detecting Chip Version... HW Chip: MT6580: 6580.0000 HW Version: 8A00.CA00.0000.0000 Connecting... Brom Version: FF BootLoader Version: 01 Searching Download Agent... Selected DA: MTK_AllInOne_DA_v3.3001.2018-11-07.23:57_458956, n.11 Sending Download Agent... DA sent successfully Initializing DA... Synchronizing with DA... NAND Flash: not installed eMMC Flash: .70010045.48414345.410119F1.3106A497 eMMC Flash: Pretec: EHACEA DA ver: 4.2.9C Initializing Memory Flash.. Initialization successfully completed Sending loaders... Loader send successfuly. Reading Flash Info... EMMC rpmb size: 4 Mb EMMC boot1 size: 4 Mb EMMC boot2 size: 4 Mb EMMC gp1 size: 0 Mb EMMC gp2 size: 0 Mb EMMC gp3 size: 0 Mb EMMC gp4 size: 0 Mb EMMC user area size: 14592 Mb Internal RAM size: 128 Kb External RAM size: 2048 Mb Reading partition... Reading info... Brand: Symphony Model: i70 Device: i70 Platform: mt6580 Android version: 7.0 Display ID: i70_HW1_V7 Searching for signatures... Resetting FRP lock.. FRP lock is successfully reseted! Backup saved as SYMPHONY_I70_30-03-2019_10-45-23.dump file Performed by 1.6.7.0 Software version.