SM-G570F FRP 7.0 not supported [Solved]

[ajmobilesshop]

G570F FRP 7.0 not supported..

[/url]

Log file "C:\Program Files\Octoplus\Octoplus_FRP_Tool\LOG\23-11-2017_15-32-12.log" created (11/23/2017 3:32:15 PM).
INFO : 11/23/2017 3:32:24 PM > Welcome to Octoplus FRP Tool v.1.0.2
INFO : 11/23/2017 3:32:27 PM >
INFO : 11/23/2017 3:32:37 PM > Platform: SAMSUNG
INFO : 11/23/2017 3:32:37 PM > Selected model: SM-G570F
INFO : 11/23/2017 3:32:37 PM > Searching for UART interface..
INFO : 11/23/2017 3:32:37 PM > COM7
WARN : 11/23/2017 3:32:37 PM > Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
INFO : 11/23/2017 3:32:37 PM > Searching for device. Please wait...
INFO : 11/23/2017 3:32:50 PM > Phone found.
INFO : 11/23/2017 3:32:50 PM > Rebooting phone in Upload Mode...
INFO : 11/23/2017 3:32:50 PM > OK
WARN : 11/23/2017 3:32:59 PM > Please connect phone to USB cable..
INFO : 11/23/2017 3:32:59 PM > Searching for a phone. Please wait...
INFO : 11/23/2017 3:33:00 PM > OK
INFO : 11/23/2017 3:33:00 PM > Reading data...
INFO : 11/23/2017 3:33:06 PM > Checking operation...
ERROR : 11/23/2017 3:33:06 PM > This version of "sBoot" is not supported, try to downgrade "sBoot"!
ERROR : 11/23/2017 3:33:06 PM > Operation was failed!
INFO : 11/23/2017 3:33:06 PM > Performed by 1.0.2 Software version

AJmobilesshop

[Octopus box]

Hello.

Please read attentively Software log and update news:

This version of "sBoot" is not supported, try to downgrade "sBoot"!

* Note: this operation works for the mentioned above devices with Android 6.x firmwares' versions and may not work for some phones’ S-boot. In this case try to write another firmware version or only S-boot from firmware and repeat the operation again.

For Android 7.x firmwares You cant try to do the following:
1. Write only Sboot (not full firmware) from Android 6.x firmware.
2. Perform "Reset FRP" operation.
3. Write Sboot from Android 7.x firmware.

[aryanmobile1989]

Originally Posted by Octopus box

Hello.

Please read attentively Software log and update news:




For Android 7.x firmwares You cant try to do the following:
1. Write only Sboot (not full firmware) from Android 6.x firmware.
2. Perform "Reset FRP" operation.
3. Write Sboot from Android 7.x firmware.

here is logo
Welcome to Octoplus Box Samsung software version 2.6.3
-----------------------------------------------------------------------------------
To connect SM-G920I phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G750F
To put SM-G750F into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
Resetting FRP lock..success
Resetting EE lock..success
Resetting Samsung Account lock..success
Operation was failed!
Performed by 2.6.3 Software version.
Selected BOOT file: E:\aryan mobile software\flash file new D
\SAMSUNG\g570f\G570FXXU1APJ6_OXE1APK2\BL_G570FXXU1 APJ6
_CL9394113_QB11358429_REV00_user_low_ship.tar.md5
Selected AP file: E:\aryan mobile software\flash file new D\SAMSUNG
\g570f\G570FXXU1APJ6_OXE1APK2\BL_G570FXXU1APJ6_CL9 394113
_QB11358429_REV00_user_low_ship.tar.md5
Selected CP file: E:\aryan mobile software\flash file new D\SAMSUNG
\g570f\G570FXXU1APJ6_OXE1APK2\CP_G570FXXU1APJ6_CL9 394113
_QB11358429_REV00_user_low_ship.tar.md5
Selected CSC file: E:\aryan mobile software\flash file new D\SAMSUNG
\g570f\G570FXXU1APJ6_OXE1APK2\CSC_OXE_G570FOXE1APK 2
_CL9844631_QB11599566_REV00_user_low_ship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G750F into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing Firmware Failed
Performed by 2.6.3 Software version.

[Octopus box]

1. Write only Sboot (not full firmware) from Android 6.x firmware.

Try to write only Sboot, not full firmware.

Also, You have selected SM-G750F instead of SM-G570F.

[aryanmobile1989]

Originally Posted by Octopus box

Try to write only Sboot, not full firmware.

Also, You have selected SM-G750F instead of SM-G570F.

already try some error sir

[Octopus box]

This means, that your phone doesn't allow to downgrade firmware. For such devices You can try to reset FRP via Factory Reset FRP Service (need credits) using Octoplus Suite Software.

[Armkar]

Thanks Octopus Box!!!
Now I try reset FRP G570f from Android 7 Via Micto Uart Cable

First I have Error sBoot

Platform: Samsung Android
Selected port: COM46
Selected model: SM-G570F
Reset FRP - UART EMMC
Searching for UART interface..
COM6
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...
OK
Please connect phone to USB cable..
Searching for a phone. Please wait...
OK
Reading data...
Checking operation...
This version of "sBoot" is not supported, try to downgrade "sBoot"!
Operation was failed!
Performed by 2.6.9 Software version.

Next I write ONLY SBOOT from Android 6

Selected firmware file: G570FXXU1AQC2_G570FOJV1AQC2_XSG_Android_6.0.1.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-G570F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.9 Software version.

After that I unlock FRP via Uart cable

Platform: Samsung Android
Selected port: COM46
Selected model: SM-G570F
Operation: Reset FRP - UART EMMC
Searching for UART interface..
COM6
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...
OK
Please connect phone to USB cable..
Searching for a phone. Please wait...
OK
Reading data...
Checking operation...
OK
Searching for UART interface..
COM6
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..
success
FRP / Reactivation lock is successfully reseted!
Performed by 2.6.9 Software version.

And Finaly I write FULL FIRMWARE ANDROID 7 !!!!, not only sBoot , Write FULL FIRMWARE ANDROID 7
.

Selected BOOT file: F:\Firmware\Samsung\G570F\G570FXXU1BQI9_Android 7\BL_G570FXXU1BQI9_CL12332636_QB15157206_REV00_use r_low_ship.tar.md5
Selected AP file: F:\Firmware\Samsung\G570F\G570FXXU1BQI9_Android 7\AP_G570FXXU1BQI9_CL12332636_QB15157206_REV00_use r_low_ship_meta.tar.md5
Selected CP file: F:\Firmware\Samsung\G570F\G570FXXU1BQI9_Android 7\CP_G570FXXU1BQI9_CL644522_QB7635335_SIGNED.tar.m d5
Selected CSC file: F:\Firmware\Samsung\G570F\G570FXXU1BQI9_Android 7\CSC_OXE_G570FOXE1BQI9_CL12332636_QB15157206_REV0 0_user_low_ship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G570F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing USERDATA section...
USERDATA section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.9 Software version.

After that Phone startet with FRP=off and work fine