ZTE Z959 No conect with phone and drivers are ok [Answered] - GSM-Forum

Edgar890913 · 07-03-2022, 22:03

Welcome to Octoplus FRP Tool v.2.1.5.0
Card S/N: 100005E50
Work ID: FFFFFFFFFFFFFFFF
Platform: ZTE
Selected model: Z959
Searching for a phone. Please wait...
No diagnostic ports found!
Operation was failed!
Performed by 2.1.5.0 Software version.

Edgar890913 · 07-03-2022, 22:34

In Recovery show this version:

Z959V1.10.21

Edgar890913 · 07-03-2022, 23:01

I try with ADB Method Say Done but still ask for account

Work ID: FFFFFFFFFFFFFFFF
Platform: __GENERAL RESET FRP METHODS
Selected model: ADB
Searching for a phone (waiting for ADB / Fastboot device)...
Phone found.
Reading info...
Phone model: ZTE Z959
SW version: LMY47V
Date: Tue Jul 17 18:08:12 CST 2018
Android version: 5.1.1
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 2.1.5.0 Software version.

Edgar890913 · 07-03-2022, 23:09

Work ID: 000000000185DFE0
Platform: __GENERAL RESET FRP METHODS
Selected model: QUALCOMM EDL AUTODETECT
Please, power phone OFF put the phone in EDL mode and connect USB cable.
Found phone on COM85
Mode: Qualcomm 9008
Connecting...
Reading info...
QC Block ID: 03D3CDE8
QC HW ID: 009600E100040000
QC CPU: Snapdragon 210 MSM8909
QC HASH: 3F4A6A7E724A8EB3EB44385FB8F764D4ADE99153B8FBE1DFA8 F09D296D21A379
QC SW VER: 00000000
Searching loader...
Sending loaders...
Backup saved as __GENERAL RESET FRP METHODS_QUALCOMM EDL AUTODETECT_03-07-2022_18-08-34.dump file
Operation was failed!
Performed by 2.1.5.0 Software version.

Octopus box · 07-04-2022, 07:37

Hello.

Please, select ZTE/_TEST FTM QUALCOMM, Put the phone into Factory mode:

- Power phone OFF;
- Press and hold "Vol-" button and connect USB cable
- Perform Reset FRP operation.

Edgar890913 · 07-04-2022, 13:27

Quote:

Originally Posted by Octopus box

Hello.

Please, select ZTE/_TEST FTM QUALCOMM, Put the phone into Factory mode:

- Power phone OFF;
- Press and hold "Vol-" button and connect USB cable
- Perform Reset FRP operation.

Same result, i made the procedure but not put the log of the operation.

Octopus box · 07-04-2022, 14:16

Quote:

Same result

Please, post here full software log, we will check it.

Octopus box · 07-11-2022, 10:04

If you have the phone on the hands, please contact us, we try to help you.

07-03-2022, 22:34	#2 (permalink)
Edgar890913 Freak Poster Join Date: Oct 2019 Location: Cuba Posts: 100 Member: 2934175 Status: Offline Thanks Meter: 76	In Recovery show this version: Z959V1.10.21

07-03-2022, 23:01	#3 (permalink)
Edgar890913 Freak Poster Join Date: Oct 2019 Location: Cuba Posts: 100 Member: 2934175 Status: Offline Thanks Meter: 76	I try with ADB Method Say Done but still ask for account Work ID: FFFFFFFFFFFFFFFF Platform: __GENERAL RESET FRP METHODS Selected model: ADB Searching for a phone (waiting for ADB / Fastboot device)... Phone found. Reading info... Phone model: ZTE Z959 SW version: LMY47V Date: Tue Jul 17 18:08:12 CST 2018 Android version: 5.1.1 Resetting FRP lock.. FRP lock is successfully reseted! Performed by 2.1.5.0 Software version.

07-03-2022, 23:09	#4 (permalink)
Edgar890913 Freak Poster Join Date: Oct 2019 Location: Cuba Posts: 100 Member: 2934175 Status: Offline Thanks Meter: 76	Work ID: 000000000185DFE0 Platform: __GENERAL RESET FRP METHODS Selected model: QUALCOMM EDL AUTODETECT Please, power phone OFF put the phone in EDL mode and connect USB cable. Found phone on COM85 Mode: Qualcomm 9008 Connecting... Reading info... QC Block ID: 03D3CDE8 QC HW ID: 009600E100040000 QC CPU: Snapdragon 210 MSM8909 QC HASH: 3F4A6A7E724A8EB3EB44385FB8F764D4ADE99153B8FBE1DFA8 F09D296D21A379 QC SW VER: 00000000 Searching loader... Sending loaders... Backup saved as __GENERAL RESET FRP METHODS_QUALCOMM EDL AUTODETECT_03-07-2022_18-08-34.dump file Operation was failed! Performed by 2.1.5.0 Software version.

07-04-2022, 07:37	#5 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,919 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,420	Hello. Please, select ZTE/_TEST FTM QUALCOMM, Put the phone into Factory mode: - Power phone OFF; - Press and hold "Vol-" button and connect USB cable - Perform Reset FRP operation.

07-11-2022, 10:04	#8 (permalink)
Octopus box Product Supporter Join Date: Oct 2009 Location: Romania, Bucharest Posts: 99,919 Member: 1146942 Status: Offline Sonork: 100.1587278 Thanks Meter: 27,420	If you have the phone on the hands, please contact us, we try to help you.