Huawei p10 frp failed what to do? [Answered]

[salim5566]

Hi team when i m trying unlock frp via test point it showing this but when i turn on phone, phone still lock

Welcome to Octoplus Huawei Software v.1.1.6.1

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: #*#2846579#*#
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: #*#14789632#*#
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM4 USB Serial Port

2020-04-29 04:34:22 GMT -------------------------------------------------
Starting Reset FRP (Test Point)
Selected phone model: VKY-L09
Phone connect successfully
Updating bootloader KIRIN960_A7.0_V1..
Initializing remote service connection
Writing XLOADER partition..
XLOADER partition has been written successfully
Writing UCE partition..
Error: Failed write UCE partition
Phone connect successfully
Updating bootloader KIRIN960_A8.0_V2..
Initializing remote service connection
Writing XLOADER partition..
XLOADER partition has been written successfully
Writing UCE partition..
Error: Failed write UCE partition
Phone connect successfully
Updating bootloader KIRIN960_A7.0_V3..
Initializing remote service connection
Writing XLOADER partition..
XLOADER partition has been written successfully
Writing UCE partition..
UCE partition has been written successfully
Writing FASTBOOT partition..
FASTBOOT partition has been written successfully
Bootloader Update successfully
Rebooting to fastboot mode..
Searching Fastboot devices...

Device Model: VKY-L09
System: VKY-L09 9.1.0.252(C706E6R1P8)

[solgeo]

Hello
I see log . but no see select frp .
and yes . ) you have 9.1
Its possible run 2 guide
1 . Testpoint ( you have phone opening )
2. Via Safe mode metod

[salim5566]

Originally Posted by solgeo

Hello
I see log . but no see select frp .
and yes . ) you have 9.1
Its possible run 2 guide
1 . Testpoint ( you have phone opening )
2. Via Safe mode metod

Hi the log is via test point but did not work so it goes on fastboot by it self and try fastboot method unlock

[Octopus box]

Hello.

We're researchin where can be the problem. but it will take some time... please stand by

[salim5566]

Originally Posted by Octopus box

Hello.

We're researchin where can be the problem. but it will take some time... please stand by

Thanks waiting for ur reply