i have huawei BLA-ALOO NEED TO UNLOCK HUAWEI ID? [Answered]

[salim5566]

Hi team can i unlock huawei id on bla-aloo?

[Octopus box]

Hello.

Unlock Huawei ID lock is supported for this phone model, please launch Software, select correct phone model and read manual attentive.

[salim5566]

Originally Posted by Octopus box

Hello.

Unlock Huawei ID lock is supported for this phone model, please launch Software, select correct phone model and read manual attentive.

there is no manual it just show this in help it dont show how to connect this phone to unlock huawei id

10. Reset Huawei ID To perform Reset Huawei ID operation, do the next steps: 
 
Perform Connect device operation;
Press "Reset Huawei ID" button.

[salim5566]

Originally Posted by Octopus box

Hello.

Unlock Huawei ID lock is supported for this phone model, please launch Software, select correct phone model and read manual attentive.

software mode also can not connect

2019-02-11 21:15:45 GMT -------------------------------------------------
Starting Connect
Selected phone model: ‪BLA-AL00‬
Error: Read serial port. Device read timeout.

Connect failed.
Performed by ‪1.0.6‬ Software version.

Found COM ports:
1: COM5 USB Serial Port
2: COM154 HUAWEI Mobile Connect - Fake Acm Interface
3: COM155 DBAdapter Reserved Interface
4: COM156 Android Adapter PCUI

2019-02-11 21:16:25 GMT -------------------------------------------------
Starting Auto detect
Error: Read serial port. Device read timeout.

Auto detect failed.
Performed by ‪1.0.6‬ Software version.

[Octopus box]

Install necessary drivers;
Check "Manual select" option;
Select proper model and COM port from the lists of Software;
Press "Connect" button.

After post here full Software log.

[salim5566]

Originally Posted by Octopus box

Install necessary drivers;
Check "Manual select" option;
Select proper model and COM port from the lists of Software;
Press "Connect" button.

After post here full Software log.

U can see all driver I have try I also choose manual post option and have try aa 3 driver one by one but some how can not connect only connect with fastboot
Can u tell me what drive u think I need to install when I connect to update mode driver already install by it self
, do I need to connect this phone in update mode or any other mode ?

[Octopus box]

Looks like your device doens't respond on commands, please try to reflash it with another firmware, use another USB cable and try to connect it to another USB port

[salim5566]

Originally Posted by Octopus box

Looks like your device doens't respond on commands, please try to reflash it with another firmware, use another USB cable and try to connect it to another USB port

ok i have try t flash with octopus i get this error

Welcome to Octoplus Huawei Software v.‪1.0.6‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM5 USB Serial Port

Sending an authorization request...
Analyzing Smart Card...
Authorized.


Found COM ports:
1: COM155 DBAdapter Reserved Interface
2: COM156 Android Adapter PCUI
3: COM154 HUAWEI Mobile Connect - Fake Acm Interface
4: COM5 USB Serial Port
Selected file: ‪C:/Users/mps7/Desktop/update/UPDATE.APP‬

2019-02-12 22:58:21 GMT -------------------------------------------------
Starting Write Firmware
Selected firmware:C:/Users/mps7/Desktop/update/UPDATE.APP
Extracting firmware partitions...
partition has been extract successfully
Connecting to phone..
Phone connect successfully
Writing firmware..
Writing SHA256RSA partition..
SHA256RSA partition has been written successfully
Writing CRC partition..
CRC partition has been written successfully
Writing CURVER partition..
CURVER partition has been written successfully
Writing VERLIST partition..
Error: Failed write VERLIST partition

Write Firmware failed.
Performed by ‪1.0.6‬ Software version.

[octopus82]

new security for turbo GPU , impossible with all tools

[salim5566]

Originally Posted by octopus82

new security for turbo GPU , impossible with all tools

so what is the solutions how can i remove huawei id on this phone?

[salim5566]

Originally Posted by Octopus box

Looks like your device doens't respond on commands, please try to reflash it with another firmware, use another USB cable and try to connect it to another USB port

Also I need to ask why read info reset Huawei I’d all this option gray out ?
What mode do I need to connect so I can see all this option fastboot mode also gray out all this option even update mode all this option gray out? So I don’t get it what mode should choose so I can use this option?
Driver is ok for update mode reason when I try to flash this phone is update mode phone can connect u can see my log

[Octopus box]

Also I need to ask why read info reset Huawei I’d all this option gray out ?

As You can see on your screenshot, currently no any model aren't connected.

What mode do I need to connect so I can see all this option fastboot mode also gray out all this option even update mode all this option gray out? So I don’t get it what mode should choose so I can use this option?

You need to select correct phone model from the list, after press Help button and check what operations are supported.

P.S. Please, try to use another firmware file.

[salim5566]

Originally Posted by Octopus box

As You can see on your screenshot, currently no any model aren't connected.


You need to select correct phone model from the list, after press Help button and check what operations are supported.

P.S. Please, try to use another firmware file.

Thanks for reply but I can not flash this phone it have some firmware protection on it I have try almost 5 file non of can flash