reset Huawei ID issue [Answered] - GSM-Forum

CHAUDHRAY ARSHAD · 03-09-2023, 08:32

when it writing xloader phone always com on

Code:

Welcome to Octoplus Huawei Software v.‪1.3.3‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM1 Communications Port
2: COM9 USB Serial Port

Job ID: 0000000001DC57D2
2023-03-09 07:30:28
Starting Read Info
Selected phone model: ‪PPA-LX2‬
Searching Fastboot devices...
Found android device: VTPBB22B05043750
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪EVE-L29‬
System: ‪EVE-L29 12.0.0.106(C185E4R1P1)‬
Android Version: ‪10‬
Base Version: ‪EVE-LGRP2-OVS 102.0.0.106‬
Custom Version: ‪EVE-L29-CUST 102.0.0.4(C185)‬
Preload Version: ‪EVE-L29-PRELOAD 102.0.0.1(C185R1)‬
C_Version: ‪C185‬
D_Version: ‪D000‬
Read Info done.
Performed by ‪1.3.3‬ Software version.

Job ID: 0000000001B571EB
2023-03-09 07:31:46
Starting Reset Huawei ID
Selected phone model: ‪PPA-LX2‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN710A_V3...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Reset Huawei ID failed.
Performed by ‪1.3.3‬ Software version.

Octopus support · 03-09-2023, 08:45

Hello

Try to use another usb cable and port in motherboard

CHAUDHRAY ARSHAD · 03-09-2023, 09:15

Quote:

Originally Posted by octopus support

hello

try to use another usb cable and port in motherboard

it not usb problem u must add model loader this phone i try all port still same

usman0000 · 03-09-2023, 10:34

Quote:

Originally Posted by CHAUDHRAY ARSHAD

it not usb problem u must add model loader this phone i try all port still same

I hv 3 phone in hand all reboot during boot
Before i did same model but I dont know whats going wrong

03-09-2023, 08:45	#2 (permalink)
Octopus support Product Supporter Join Date: Jan 2019 Location: USA, New York Posts: 10,162 Member: 2891705 Status: Offline Thanks Meter: 2,141	Hello Try to use another usb cable and port in motherboard