Alcatel BE4 135 - GSM-Forum

kick · 11-12-2001, 23:34

hi,

I have here an Alcatel BE4 135 I have unlocked many of these... but i can't unlock this one! cable is ok... it starts up the phone when i click on "unlock" button... but then nothing happens!

Any sugestion? i've tryed cooler by koci, retrofit, etc

What's the best prog to unlock this from SP-Lock?

BR

wazl · 11-12-2001, 23:58

Hi Kick, i sent you some working soft !! In my case unlocking only works with full loaded phonebattery.If battery is not full loaded phone only powers on.

Good luck <img src="smile.gif" border="0">

wazl

brainman · 11-13-2001, 00:07

Try this soft: <a href="http://www.samuel.cz/~brainman/allbe4new2109.rar" target="_blank">allbe4new2109.rar</a> I have unlocked many BE4 phones with it.

kick · 11-13-2001, 03:53

i have now full battery. i have this error:

Version Not Supported Send Full Flash -> [email protected]

any clue?

jonwillow · 11-13-2001, 12:30

Try ignore message 5 times !

kick · 11-13-2001, 23:59

Doesn't work with me... Tryed also with martech BE4 1.5 -> "error"

[quote]Originally posted by jonwillow: Try ignore message 5 times !<hr></blockquote>

Hell G.S.M. · 11-14-2001, 00:02

Did you try the Alcatel ****er!

kick · 11-14-2001, 01:40

yes. i also tryed alcatel f u c k e r by florin same error as the others! Phone powers UP when i click on "BE4", but then, nothing happens!

screenshot here:

emsi · 11-14-2001, 07:10

Hello Kick,

try to unlock it without using ext. power to your cable. (if u have). If not , read the flash and send it to me, I will look at it.

EMSI

dominik · 11-14-2001, 10:18

Hi Kick I had this problem many times,try to clean the phone conector with some brush and try again. Regards

jonwillow · 11-14-2001, 16:38

Try open phone and check damages in connector side

MAK_US1977 · 11-15-2001, 14:56

Dear Friends I am afraid fro unlocking alcatel 3xx and 5xx when I try to unlock it before with eraser it didn't power again . If anybody have good solution and sw. can you send it to me .

[MoOkIe] · 11-26-2001, 20:28

[quote]Originally posted by MAK_US1977: Dear Friends I am afraid fro unlocking alcatel 3xx and 5xx when I try to unlock it before with eraser it didn't power again . If anybody have good solution and sw. can you send it to me .<hr></blockquote>

I Friend!

If your phone went dead while unlocking, try to unlock again... if it's working soft. you will have about 70% chances of reviving your phone...

C ya!

11-12-2001, 23:34	#1 (permalink)
kick No Life Poster Join Date: Feb 2001 Location: Portugal Posts: 673 Member: 3302 Status: Offline Thanks Meter: 16	Alcatel BE4 135 hi, I have here an Alcatel BE4 135<br />I have unlocked many of these... but i can't unlock this one! cable is ok... it starts up the phone when i click on "unlock" button... but then nothing happens! Any sugestion? i've tryed cooler by koci, retrofit, etc What's the best prog to unlock this from SP-Lock? BR

11-12-2001, 23:58	#2 (permalink)
wazl VIP-Member Join Date: Feb 2001 Location: any where Age: 55 Posts: 2,182 Member: 3222 Status: Offline Thanks Meter: 86	Hi Kick,<br />i sent you some working soft !!<br />In my case unlocking only works with full loaded phonebattery.If battery is not full loaded <br />phone only powers on. Good luck <img src="smile.gif" border="0"> wazl

11-13-2001, 00:07	#3 (permalink)
brainman Freak Poster Join Date: Apr 2001 Location: sk Age: 39 Posts: 101 Member: 4128 Status: Offline Thanks Meter: 0	Try this soft: <a href="http://www.samuel.cz/~brainman/allbe4new2109.rar" target="_blank">allbe4new2109.rar</a><br />I have unlocked many BE4 phones with it.

11-13-2001, 03:53	#4 (permalink)
kick No Life Poster Join Date: Feb 2001 Location: Portugal Posts: 673 Member: 3302 Status: Offline Thanks Meter: 16	i have now full battery.<br />i have this error: Version Not Supported<br />Send Full Flash -> [email protected] any clue?

11-13-2001, 23:59	#6 (permalink)
kick No Life Poster Join Date: Feb 2001 Location: Portugal Posts: 673 Member: 3302 Status: Offline Thanks Meter: 16	Doesn't work with me...<br />Tryed also with martech BE4 1.5 -> "error" [quote]Originally posted by jonwillow:<br /><strong>Try ignore message 5 times !</strong><hr></blockquote>

11-13-2001, 12:30	#5 (permalink)
jonwillow No Life Poster Join Date: Sep 1999 Location: Europe Age: 43 Posts: 905 Member: 461 Status: Offline Thanks Meter: 2	Try ignore message 5 times !

11-14-2001, 00:02	#7 (permalink)
Hell G.S.M. Freak Poster Join Date: Jun 2001 Location: Netherlands Posts: 136 Member: 4947 Status: Offline Thanks Meter: 5	Did you try the Alcatel ****er!

11-14-2001, 01:40	#8 (permalink)
kick No Life Poster Join Date: Feb 2001 Location: Portugal Posts: 673 Member: 3302 Status: Offline Thanks Meter: 16	yes. i also tryed alcatel f u c k e r by florin<br />same error as the others! Phone powers UP when i click on "BE4", but then, nothing happens! screenshot here:

11-14-2001, 07:10	#9 (permalink)
emsi Insane Poster Join Date: Apr 2001 Posts: 95 Member: 4393 Status: Offline Thanks Meter: 0	Hello Kick, try to unlock it without using ext. power to your cable. (if u have). If not , read the flash and send it to me, I will look at it. EMSI

11-14-2001, 10:18	#10 (permalink)
dominik No Life Poster Join Date: Jul 2001 Posts: 877 Member: 5389 Status: Offline Thanks Meter: 1	Hi Kick<br /> I had this problem many times,try to clean the<br />phone conector with some brush and try again.<br /> Regards

11-14-2001, 16:38	#11 (permalink)
jonwillow No Life Poster Join Date: Sep 1999 Location: Europe Age: 43 Posts: 905 Member: 461 Status: Offline Thanks Meter: 2	Try open phone and check damages in connector side

11-15-2001, 14:56	#12 (permalink)
MAK_US1977 No Life Poster Join Date: Apr 2001 Location: Egypt Age: 46 Posts: 1,530 Member: 4263 Status: Offline Sonork: 100.1582330 Thanks Meter: 49	Dear Friends<br />I am afraid fro unlocking alcatel 3xx and 5xx <br />when I try to unlock it before with eraser it didn't power again . <br />If anybody have good solution and sw. can you send it to me .

11-26-2001, 20:28	#13 (permalink)
[MoOkIe] No Life Poster Join Date: Mar 2001 Location: Leiria, PT & *****, CN Posts: 2,514 Member: 3756 Status: Offline** Thanks Meter: 5	[quote]Originally posted by MAK_US1977:<br /><strong>Dear Friends<br />I am afraid fro unlocking alcatel 3xx and 5xx <br />when I try to unlock it before with eraser it didn't power again . <br />If anybody have good solution and sw. can you send it to me .</strong><hr></blockquote> I Friend! If your phone went dead while unlocking, try to unlock again... if it's working soft. you will have about 70% chances of reviving your phone... C ya!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Languge pack Alcatel BE4 135	rvs	Alcatel & TCL Old Models	1	10-24-2002 08:10
Alcatel BE4 135 flasher	sdimitri	Alcatel & TCL Old Models	6	08-01-2001 23:00
How to read phone code(not Network code) for Alcatel BE4 135?	HuyGSM	Alcatel & TCL Old Models	2	07-21-2001 07:48
BE4 135	vampire	Alcatel & TCL Old Models	0	02-27-2001 19:09
Be4 135	ssbul	Alcatel & TCL Old Models	0	01-30-2001 14:39