can somebody help me with alcatel be5 v124 with call sos only - GSM-Forum

alexander_bg · 05-28-2002, 00:26

hi all. i have one alcatel be5 v124 with flash id 989C9090.
after flash with other full flash on the dislpay of the phone there is call SOS. the phone don't acsept any simcards. if i try to read full flash the first 64kb from flash are empty.
PLEASE HELP ME TO REPAIR THIS

regards
sasho

p.s. i have not backup

comunicatel · 05-28-2002, 15:30

Only Mcomm licensed soft supports for now 989C9090 toshiba flashes. I have simillar problem.Try repair soft by vygis "alcod.exe"
BG:
Ñàøî , àêî íàìåðèø ðåøåíèå îáàäè ñå.
Mcomm ïðîäàâàò ñîôòóåðà çà 250 äîëàðà.

ppl · 05-28-2002, 17:15

I have backup from one.
BG:
Ako ti varshi rabota palen flash imam-moje bi s MCOMM.AKO NE STANE ZVANNI IMAM NYAKAKAV NOV REPAIR AMA NE ZNAM BA4KA LI

087234504-PLAMEN

vule · 05-28-2002, 23:56

Hiya

If u have original backup, flash it then unlock phone again with allbe528 soft

If don't try to get full flash V121 or 123 and unlock it after flash.
It may work but i did not tested it !!!!!!

Sos calls only means that security checksum in lock area is damaged and all u need is to repair it ( don't know for be5 but for be1, be3 and be4 i am sure, and i think that be5 is same )

Did not had much time to play with be5

BR

Vule

comunicatel · 05-29-2002, 15:00

Hi allbe528 can't unlock most of new Be5 v 124.
The Sos calls only is because of wrong flash
Read http://forum.gsmhosting.com/vbb/show...threadid=41486 topic
the phone is alive but could not accept card , becase incorrect values of addr. 04D28h . and only original flash contains this values. Alcode repair can't help
BG:
Çäðàñòè Ïëàìåíå ,
Òâîÿòà îïðÿâà÷êà íàé âåîÿòíî å Alcode repair ðàáîòè ñ íÿêîè ÁÅ4- Áå5 íî íå è ñ flash id 989C9090.

vule · 05-29-2002, 16:33

Sorry if i put wrong info in here...

I did not had much time to play with be5 i just unlocked 150 pcs of be5 V124 in past week......

I used allbe528

It said " Unknown flash " and " unknown imei " but all phones unlocked !!!!!

A lot of errors like " time out ", some phones i tried to unlock 5-6 times but all unlocked !

Some phones unlocking work without battery, some phones need it.

If i have some time i will try to figure out what's wrong....

BR

Vule

05-28-2002, 00:26	#1 (permalink)
alexander_bg Freak Poster Join Date: Mar 2002 Location: BULGARIA Age: 48 Posts: 312 Member: 10423 Status: Offline Thanks Meter: 15	can somebody help me with alcatel be5 v124 with call sos only hi all. i have one alcatel be5 v124 with flash id 989C9090. after flash with other full flash on the dislpay of the phone there is call SOS. the phone don't acsept any simcards. if i try to read full flash the first 64kb from flash are empty. PLEASE HELP ME TO REPAIR THIS regards sasho p.s. i have not backup

05-28-2002, 15:30	#2 (permalink)
comunicatel Freak Poster Join Date: Mar 2002 Posts: 474 Member: 10201 Status: Offline Thanks Meter: 0	Only Mcomm licensed soft supports for now 989C9090 toshiba flashes. I have simillar problem.Try repair soft by vygis "alcod.exe" BG: Ñàøî , àêî íàìåðèø ðåøåíèå îáàäè ñå. Mcomm ïðîäàâàò ñîôòóåðà çà 250 äîëàðà. Last edited by comunicatel; 05-28-2002 at 15:38.

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Please, can somebody help me with the code for my Volkswagen radio.	ansergio	CAR Electronics	1	07-03-2009 19:05
CAn somebody help me with this 3310 ?	RafalTK	Twisterflasher	8	02-26-2005 20:25
please can somebody help me with M55	cybercom	E-Gold Based Phones	1	09-16-2004 11:28
Can somebody help me with LG W7020 pinout,please ?!	seyken	LG	0	05-05-2003 18:16
Can somebody help me with "C10D swing"	Templer	x1x to x45/x50	5	04-05-2000 00:46

05-28-2002, 17:15	#3 (permalink)
ppl Freak Poster Join Date: Oct 2001 Location: bootcore Age: 49 Posts: 258 Member: 7069 Status: Offline Thanks Meter: 6	I have backup from one. BG: Ako ti varshi rabota palen flash imam-moje bi s MCOMM.AKO NE STANE ZVANNI IMAM NYAKAKAV NOV REPAIR AMA NE ZNAM BA4KA LI 087234504-PLAMEN

05-28-2002, 23:56	#4 (permalink)
vule No Life Poster Join Date: Apr 2002 Location: Radiometer Medical ApSBrønshøj Age: 51 Posts: 721 Member: 10854 Status: Offline Sonork: 1578988 Thanks Meter: 3	Hiya If u have original backup, flash it then unlock phone again with allbe528 soft If don't try to get full flash V121 or 123 and unlock it after flash. It may work but i did not tested it !!!!!! Sos calls only means that security checksum in lock area is damaged and all u need is to repair it ( don't know for be5 but for be1, be3 and be4 i am sure, and i think that be5 is same ) Did not had much time to play with be5 BR Vule

05-29-2002, 15:00	#5 (permalink)
comunicatel Freak Poster Join Date: Mar 2002 Posts: 474 Member: 10201 Status: Offline Thanks Meter: 0	Hi allbe528 can't unlock most of new Be5 v 124. The Sos calls only is because of wrong flash Read http://forum.gsmhosting.com/vbb/show...threadid=41486 topic the phone is alive but could not accept card , becase incorrect values of addr. 04D28h . and only original flash contains this values. Alcode repair can't help BG: Çäðàñòè Ïëàìåíå , Òâîÿòà îïðÿâà÷êà íàé âåîÿòíî å Alcode repair ðàáîòè ñ íÿêîè ÁÅ4- Áå5 íî íå è ñ flash id 989C9090.

05-29-2002, 16:33	#6 (permalink)
vule No Life Poster Join Date: Apr 2002 Location: Radiometer Medical ApSBrønshøj Age: 51 Posts: 721 Member: 10854 Status: Offline Sonork: 1578988 Thanks Meter: 3	Sorry if i put wrong info in here... I did not had much time to play with be5 i just unlocked 150 pcs of be5 V124 in past week...... I used allbe528 It said " Unknown flash " and " unknown imei " but all phones unlocked !!!!! A lot of errors like " time out ", some phones i tried to unlock 5-6 times but all unlocked ! Some phones unlocking work without battery, some phones need it. If i have some time i will try to figure out what's wrong.... BR Vule