3310 10sec network or reboot - GSM-Forum

seadoo · 11-15-2001, 21:27

I've got a 3310 V 04.18 from someone which loses network after 10 second or sometimes it reboots. After downloading the flash and compare it with another one it's completely the same till 3D0000. All checksums MCU and PPM are right. Then i read the MSID with koci logger and this is the ouput : 00000010000000101000000000 I think that some data of the EEPROM is corrupted, but IMEI is still OK. Is it possible to find what data in EEPROM is corrupted or is it just the MSID. Can I correct the MSID?

Seadoo

seadoo · 11-17-2001, 11:24

Has anyone information about EEPROM area or at least maybe how MSID is build? I'm sure there's some solution to this problem

debeliamark · 11-17-2001, 11:50

You have mismatch on PPM. And look like phone is unlocked partialy.

1. Try to make full flash MCU + PPM (without unlocking) and recalculate MSID. 2. Unlock phone with partial for version.

Other way - you must try to find right PPM for your phone flashing all types of PPM packs (from "A" to .... "O" ).

If this not work - may be is hardware prob. Try 3310 hanging solution.

Have nice day, Debelia Mark

seadoo · 11-17-2001, 17:26

I don't think the problem is in the MCU or PPM area. I've got more 3310's with the same MCU and PPM version. I read about 7-8 full flashes (MCU + PPM) and they're all exactly the same, every bit of them. I think there are some corrupted bytes in the EEPROM area cause the weird MSID, but strange enough IMEI is still correct. Phone is unlocked by partial indeed (sadly enough not by me, cause I always make backups including EEPROM). Earlier I've got some same problem with a version 4.45 that i took back to Service Center. When I got it back they said that it was a software problem also. I think the same happened, but this one is no more under warranty. So I want to find out what's wrong with this damned thing

seadoo · 11-18-2001, 12:21

Well, I've played with the phone and at the end I've flashed it with a locked partial. Now phone is working again 100% and I can read a correct MSID again. But unfortunatly the phone is locked again. As i can see with nokiatool locks 1, 2 and 4 seems to be closed. But if I try to partial flash it, phone has same problems described above. Can anyone give me some clues to unlock this bastard?

neb · 11-18-2001, 15:14

DebeliaMark,

Could you recalculate MSID,after changing MCU and PPM?

Regards,

neb

Firat · 11-18-2001, 15:32

just downgarde it with dejan 1.04 or jic.. and after this unlock it again..

regards,

Sandman · 11-18-2001, 16:35

po_ga's right!i think downgrading or upgrading is the best solution!!!!!!!

----------------------------

 kick butt first, take names later........... <img src="biggrin.gif" border="0">

11-15-2001, 21:27	#1 (permalink)
seadoo Junior Member Join Date: Aug 2001 Posts: 27 Member: 5618 Status: Offline Thanks Meter: 0	3310 10sec network or reboot I've got a 3310 V 04.18 from someone which loses network after 10 second or sometimes it reboots.<br />After downloading the flash and compare it with another one it's completely the same till 3D0000. All checksums MCU and PPM are right.<br />Then i read the MSID with koci logger and this is the ouput : 00000010000000101000000000<br />I think that some data of the EEPROM is corrupted, but IMEI is still OK. Is it possible to find what data in EEPROM is corrupted or is it just the MSID. Can I correct the MSID? Seadoo

11-17-2001, 11:50	#3 (permalink)
debeliamark No Life Poster Join Date: May 2001 Location: Bulgaria Age: 56 Posts: 4,796 Member: 4627 Status: Offline Sonork: 57528:debeliamark Thanks Meter: 1,034	You have mismatch on PPM. And look like phone is unlocked partialy. 1. Try to make full flash MCU + PPM (without unlocking) and recalculate MSID.<br />2. Unlock phone with partial for version. Other way - you must try to find right PPM for your phone flashing all types of PPM packs (from "A" to .... "O" ). If this not work - may be is hardware prob. Try 3310 hanging solution. Have nice day, Debelia Mark

11-17-2001, 17:26	#4 (permalink)
seadoo Junior Member Join Date: Aug 2001 Posts: 27 Member: 5618 Status: Offline Thanks Meter: 0	I don't think the problem is in the MCU or PPM area. I've got more 3310's with the same MCU and PPM version. I read about 7-8 full flashes (MCU + PPM) and they're all exactly the same, every bit of them.<br />I think there are some corrupted bytes in the EEPROM area cause the weird MSID, but strange enough IMEI is still correct. Phone is unlocked by partial indeed (sadly enough not by me, cause I always make backups including EEPROM).<br />Earlier I've got some same problem with a version 4.45 that i took back to Service Center. When I got it back they said that it was a software problem also. I think the same happened, but this one is no more under warranty.<br />So I want to find out what's wrong with this damned thing

11-18-2001, 12:21	#5 (permalink)
seadoo Junior Member Join Date: Aug 2001 Posts: 27 Member: 5618 Status: Offline Thanks Meter: 0	Well, I've played with the phone and at the end I've flashed it with a locked partial. Now phone is working again 100% and I can read a correct MSID again. But unfortunatly the phone is locked again.<br />As i can see with nokiatool locks 1, 2 and 4 seems to be closed. But if I try to partial flash it, phone has same problems described above.<br />Can anyone give me some clues to unlock this bastard?

11-18-2001, 15:32	#7 (permalink)
Firat Junior Member Join Date: Nov 2001 Location: holland Posts: 8 Member: 7450 Status: Offline Thanks Meter: 0	just downgarde it with dejan 1.04 or jic.. <br />and after this unlock it again.. regards,

11-17-2001, 11:24	#2 (permalink)
seadoo Junior Member Join Date: Aug 2001 Posts: 27 Member: 5618 Status: Offline Thanks Meter: 0	Has anyone information about EEPROM area or at least maybe how MSID is build? I'm sure there's some solution to this problem

11-18-2001, 15:14	#6 (permalink)
neb Freak Poster Join Date: Dec 1999 Location: Earth Posts: 461 Member: 751 Status: Offline Thanks Meter: 19	DebeliaMark, Could you recalculate MSID,after changing MCU and PPM? Regards, neb

11-18-2001, 16:35	#8 (permalink)
Sandman No Life Poster Join Date: Nov 2001 Location: Never Land Posts: 924 Member: 7277 Status: Offline Sonork: 100.42158 Thanks Meter: 68	po_ga's right!i think downgrading or upgrading is the best solution!!!!!!! ---------------------------- <br />kick butt first,<br />take names later........... <img src="biggrin.gif" border="0">

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3310 nokia No network or 00000	amitks_in	Nokia Hardware & Hardware Repair	14	02-13-2010 08:52
3310 loses network or turns off when calling	Geduxaz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	19	09-05-2007 04:22
3310 "no access" or "found 1 network only"	eureka8888	Nokia Hardware & Hardware Repair	3	09-16-2002 21:27
3310 > 3315, keeps rebooting ?	Burnah_	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	05-18-2002 01:13
NOKIA 3310 HAD NETWORK FOR 10SEC ONLY!!PLS HELP	Henry	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	03-19-2002 22:14