3310 v4.02 powers off by itself - GSM-Forum

MaRiN · 04-27-2001, 00:44

I have N3310 v4.02 wich powers off by itself few minutes after powering on.
I reflash phone 200-300 with flash from working phone, but nothing happend, always powering off

Phone is from D2.
Does anybady have any solution for this problem?

MDR · 04-27-2001, 08:59

if it was auto shutting off already before flashing it....

then change the LCD

ahmed · 04-27-2001, 09:22

It is not your LCD ,this is a common problem with early production versions of the 3310 ,take it to a Nokia Service Centre ,some parts have to be changed ,on some phones a software upgrade to V4.18 solves the problem

Forest · 04-27-2001, 14:08

yes, ahmed have write.. i has an txt solution for that cases in 3310 phones mail me if you want it.
Regards

Charly · 04-27-2001, 14:26

Hi All

Yes I agree there are known problems with most early 3310's (Upto Ver 4.18) but MDR is right as well, all nokias will reset if there is a bad contact between Elastomer and PCB so before you do anything else clean display contacts then if fault still there try nokia for parts/software upgrade.

Regards
Charlie

micklong · 05-02-2001, 13:16

hello peoples ..
im gl;ad this topis has been brought up again ...

a topic a while agao .. saying heating it up with a hot air gun ..
due to the connection from chip to board ...

what do u all think of this solution..

now reading this thread... it would seem that there are several problems with these phones, and depending on which is the fault... then u need to do different things to different phones !!!...

well any thoughts ?? .... Mick ..

vid · 05-02-2001, 18:38

Hi,
That is not problem on software that is hardware,this problem you need change 2pcs of capaciter and 1 pc of reserter on your PCB. this is note from Nokia P/L.

Good Luck to all

Vid

Quote:

Originally posted by ahmed:
<STRONG>It is not your LCD ,this is a common problem with early production versions of the 3310 ,take it to a Nokia Service Centre ,some parts have to be changed ,on some phones a software upgrade to V4.18 solves the problem</STRONG>

Pandemonio100 · 05-02-2001, 21:16

To Marin I have the solution it's a problem hardware if you want i send you the prospect.

sloba · 05-02-2001, 23:40

its not ccont,flash or ram.i changed them all.what`s wrong then??

04-27-2001, 00:44	#1 (permalink)
MaRiN Freak Poster Join Date: Nov 2000 Location: Croatia Age: 47 Posts: 353 Member: 2466 Status: Offline Thanks Meter: 10	3310 v4.02 powers off by itself I have N3310 v4.02 wich powers off by itself few minutes after powering on. I reflash phone 200-300 with flash from working phone, but nothing happend, always powering off Phone is from D2. Does anybady have any solution for this problem?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
N6600, power turn off by itself	ering	Nokia Hardware & Hardware Repair	3	04-14-2007 22:47
3310 swich on and off by itself	askuqi	Nokia Hardware & Hardware Repair	7	04-29-2004 14:30
Panasonic G51m powers off by itself???	rote79	Panasonic	0	03-25-2004 18:57
3310 blocking and power off itself	george gsm	Nokia Hardware & Hardware Repair	7	10-26-2003 22:31
3310 V4.02 power off	Harry224	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	01-19-2003 22:37

04-27-2001, 08:59	#2 (permalink)
MDR No Life Poster Join Date: Apr 2000 Location: Philippines Posts: 555 Member: 1272 Status: Offline Thanks Meter: 3	if it was auto shutting off already before flashing it.... then change the LCD

04-27-2001, 09:22	#3 (permalink)
ahmed No Life Poster Join Date: Feb 2001 Posts: 1,290 Member: 3279 Status: Offline Thanks Meter: 19	It is not your LCD ,this is a common problem with early production versions of the 3310 ,take it to a Nokia Service Centre ,some parts have to be changed ,on some phones a software upgrade to V4.18 solves the problem

04-27-2001, 14:08	#4 (permalink)
Forest Major Poster Join Date: Apr 2001 Location: Moledo Posts: 35 Member: 4310 Status: Offline Thanks Meter: 0	yes, ahmed have write.. i has an txt solution for that cases in 3310 phones mail me if you want it. Regards

04-27-2001, 14:26	#5 (permalink)
Charly No Life Poster Join Date: Sep 2000 Location: UK York Age: 56 Posts: 730 Member: 2008 Status: Offline Thanks Meter: 4	Hi All Yes I agree there are known problems with most early 3310's (Upto Ver 4.18) but MDR is right as well, all nokias will reset if there is a bad contact between Elastomer and PCB so before you do anything else clean display contacts then if fault still there try nokia for parts/software upgrade. Regards Charlie

05-02-2001, 13:16	#6 (permalink)
micklong Freak Poster Join Date: Jan 2001 Location: UK Posts: 285 Member: 3153 Status: Offline Thanks Meter: 2	hello peoples .. im gl;ad this topis has been brought up again ... a topic a while agao .. saying heating it up with a hot air gun .. due to the connection from chip to board ... what do u all think of this solution.. now reading this thread... it would seem that there are several problems with these phones, and depending on which is the fault... then u need to do different things to different phones !!!... well any thoughts ?? .... Mick ..

05-02-2001, 21:16	#8 (permalink)
Pandemonio100 No Life Poster Join Date: Feb 2001 Location: ITALY Age: 51 Posts: 3,969 Member: 3381 Status: Offline Thanks Meter: 1,171	To Marin I have the solution it's a problem hardware if you want i send you the prospect.

05-02-2001, 23:40	#9 (permalink)
sloba Freak Poster Join Date: Nov 1999 Location: Serbia Age: 52 Posts: 274 Member: 685 Status: Offline Thanks Meter: 23	its not ccont,flash or ram.i changed them all.what`s wrong then??