5110 ver 5.30 does'nt work - GSM-Forum

repraky · 01-03-2001, 08:04

Hi,
I have strange problem. My flasher works with
nokia 3210 5.36,5110 ver 5.30 but it was flash to higher version in service. But my new Nokia
5110 ver 5.30 flash id=000122DA doesn't comunicate.
It just load boot loader and then write TX=1 error, and I cant read or write to phone.

If someone can help,then thanx.

MARK

------------------

Zalman · 01-03-2001, 09:58

You must use TIA file for AMD. Rename this file to f_loader.bin

01-16-2001, 11:28

To ZALMAN:

Tak to se mi tedy moc nezdá !!!

Mám ten samý problém, a nejde to !!!

Asi AMD tia myslíte napø. w29lv800.tia že ?

Nefunguje to, a zajímalo by mì jestli tento typ flashe 000122DA nìkdo vùbec dokázal rozchodit na svém dejanovském interfacu?

Moc tomu nevìøím !!!

Tigy · 01-17-2001, 18:15

Tak to aky file (*.tia) mas pouzit si zistis jednoducho tak, ze vezmes do ruky screwdriver a precitas si to priamo zo svabu v telefone ...kapisto?

Alebo najlepsie ak pouzijes seriozny FlashManager, ktory to uroby za teba.

------------------

01-18-2001, 09:44

To TIGY>

Vim jak zjistit jakej soubor potrebuju, ale proste mi to nacita jeno nuly a jednicky (FF00FF00FF00FF00) a kdyz ho napatchuju tak se to zasekne a nenacte to ani jednu adresu ve Flashru od Dejana...

01-22-2001, 14:08

HI GUYS...

ID 000122DA FLASH WORKING 100%, but i can only write into flash and not read flash image data...

Thx All...

Good Luck """

01-03-2001, 08:04	#1 (permalink)
repraky Freak Poster Join Date: May 2000 Location: Slovakia Posts: 113 Member: 1341 Status: Offline Thanks Meter: 0	5110 ver 5.30 does'nt work Hi, I have strange problem. My flasher works with nokia 3210 5.36,5110 ver 5.30 but it was flash to higher version in service. But my new Nokia 5110 ver 5.30 flash id=000122DA doesn't comunicate. It just load boot loader and then write TX=1 error, and I cant read or write to phone. If someone can help,then thanx. MARK ------------------

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
jethro and 5110 vers.5.30	johnny_cash	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	04-02-2001 15:50
I can't read 000122DA in 5110 ver 5.28 and 5.30.	nightxyz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	02-09-2001 07:49
Nokia 5110 ver 5.30 does'nt comunicate	repraky	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	01-14-2001 19:36
Nokia 5110 ver 5.30	alpha	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	12-13-2000 11:04
solution for all 5110 ver 5.28 and 3210 ver 5.31 for exchange	sebastijan	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	06-25-2000 20:47

01-03-2001, 09:58	#2 (permalink)
Zalman Junior Member Join Date: Jan 2001 Location: Czech Republic Posts: 22 Member: 2939 Status: Offline Thanks Meter: 0	You must use TIA file for AMD. Rename this file to f_loader.bin

01-16-2001, 11:28	#3 (permalink)
GSM-CZ TM&HM Guest Posts: n/a Member:	To ZALMAN: Tak to se mi tedy moc nezdá !!! Mám ten samý problém, a nejde to !!! Asi AMD tia myslíte napø. w29lv800.tia že ? Nefunguje to, a zajímalo by mì jestli tento typ flashe 000122DA nìkdo vùbec dokázal rozchodit na svém dejanovském interfacu? Moc tomu nevìøím !!!

01-17-2001, 18:15	#4 (permalink)
Tigy Major Poster Join Date: Mar 2000 Location: Slovakia Posts: 43 Member: 1145 Status: Offline Thanks Meter: 0	Tak to aky file (*.tia) mas pouzit si zistis jednoducho tak, ze vezmes do ruky screwdriver a precitas si to priamo zo svabu v telefone ...kapisto? Alebo najlepsie ak pouzijes seriozny FlashManager, ktory to uroby za teba. ------------------

01-18-2001, 09:44	#5 (permalink)
GSM-CZ TM&HM Guest Posts: n/a Member:	To TIGY> Vim jak zjistit jakej soubor potrebuju, ale proste mi to nacita jeno nuly a jednicky (FF00FF00FF00FF00) a kdyz ho napatchuju tak se to zasekne a nenacte to ani jednu adresu ve Flashru od Dejana...

01-22-2001, 14:08	#6 (permalink)
GSM-CZ TM&HM Guest Posts: n/a Member:	HI GUYS... ID 000122DA FLASH WORKING 100%, but i can only write into flash and not read flash image data... Thx All... Good Luck """