6 steps to change you Signal Bars + create your own slide!! - GSM-Forum

adrianpopa · 02-22-2003, 09:40

Hi! Ithought i share my experience with "Poodriver". As almost everybody knows, with "Poodriver you can change the way signal bars look- "NET STRENGHT" , modify your own Slideshow(will apear when pressing *#SIM0CLOCK# . Cool .) , menus, etc.... It's a great litle prog. Unfortunally it has only been released in german.

I hope this info will help those who did'nt understand it. For those who arent familiar with it , "Poodriver" its used to modify graphics in th fls.

First of all , back-up your fls.
1.Using g3n0lite v 1.2 , open the fls you want to modify. Under the "Patch" button you see 2 check boxes . Check the option you want, ore both.

2.Click "Patch"
If you chosed "Net strenght" , after clicking the "Patch" button you will be asked to chose the type of signal strenght bar you want to use.

3.Scroll down the "Output Window" untill you get to the SUMMARY where you'll see the list of offsets (for every frame of the animated signal bar ) where you should put your graphics. You'll need them , so d'ont close g3n0lite just yet.
4. Save the fls.
Open "Poodriver". In the "Datei" menu , chose "Flashfile laden" (opens the fls), and open the fls you just saved with g3n0lite . In the "Optionen " menu , select "Offset in dez" (Offset in dec).

5. To change the signal bar:
Check the "Hinweise" radio buton.
Copy the first offset from the g3n0lite list (after the "dec: ") and paste it the "Offset(dez)" box in "Poodriver". Click "Offset lesen" then click "Hex to pic". Now you should see the first frame of your animated signal bar. Click "Bild loschen" if you want to clear the image and start from scratch. You can also open bitmap files : in "Datei" menu, chose "Bild laden" (not Bin Laden

). After you're done editing the graphic click "Pic to hex".
Repeat step 5 untill you're done with all the frames. Save the fls in "Datei" => "Flash spechern". Correct Checksums with "N-free". Flash-it to your phone, update FAID using "K-nok" or other tool and thats it.

6. To modify the slide:
Check the "Start, Spiel, Gewinn".
From g3n0lite ,copy the offset for slide frame 1 Example: (Offset for slide frame #1: hex: 00120DFC dec: 1183228) In this example its the number after "dec:". Click "Offset lesen" then click "Hex to pic". Now you see the first picture .Click "Bild loschen" if you want to clear the image and start from scratch. You can also open bitmap files : in "Datei" menu, chose "Bild laden". After you're done editing the graphic click "Pic to hex".
Repeat step 6 untill you're done with all the slide frames. Save the fls in "Datei" => "Flash spechern".Correct Checksums with "N-free". Flash-it to your phone, update FAID using "K-nok" or other tool and thats it.

You will find "Poodriver" here http://nokiafree.org/forums/t16155/s.html
Enjoy!

fonec · 02-22-2003, 22:46

thanks
good work

.::AkhavanGSM::. · 02-24-2003, 11:34

OK!!!

adrianpopa · 02-25-2003, 16:51

Glad to hlp! I found out there's an english version out. That shoul help!

BesTCooL · 03-05-2003, 23:33

Hey great way but I used hexgraph 1.0 this better nice soft

Thnks

alrbee · 03-06-2003, 09:30

Vary nice ,

Keep good working ,,,

Thanks

adrianpopa · 03-06-2003, 13:52

@ alrbee
You're welcome!

02-22-2003, 09:40	#1 (permalink)
adrianpopa Junior Member Join Date: Feb 2003 Age: 45 Posts: 12 Member: 22550 Status: Offline Thanks Meter: 0	6 steps to change you Signal Bars + create your own slide!! Hi! Ithought i share my experience with "Poodriver". As almost everybody knows, with "Poodriver you can change the way signal bars look- "NET STRENGHT" , modify your own Slideshow(will apear when pressing *#SIM0CLOCK# . Cool .) , menus, etc.... It's a great litle prog. Unfortunally it has only been released in german. I hope this info will help those who did'nt understand it. For those who arent familiar with it , "Poodriver" its used to modify graphics in th fls. First of all , back-up your fls. 1.Using g3n0lite v 1.2 , open the fls you want to modify. Under the "Patch" button you see 2 check boxes . Check the option you want, ore both. 2.Click "Patch" If you chosed "Net strenght" , after clicking the "Patch" button you will be asked to chose the type of signal strenght bar you want to use. 3.Scroll down the "Output Window" untill you get to the SUMMARY where you'll see the list of offsets (for every frame of the animated signal bar ) where you should put your graphics. You'll need them , so d'ont close g3n0lite just yet. 4. Save the fls. Open "Poodriver". In the "Datei" menu , chose "Flashfile laden" (opens the fls), and open the fls you just saved with g3n0lite . In the "Optionen " menu , select "Offset in dez" (Offset in dec). 5. To change the signal bar: Check the "Hinweise" radio buton. Copy the first offset from the g3n0lite list (after the "dec: ") and paste it the "Offset(dez)" box in "Poodriver". Click "Offset lesen" then click "Hex to pic". Now you should see the first frame of your animated signal bar. Click "Bild loschen" if you want to clear the image and start from scratch. You can also open bitmap files : in "Datei" menu, chose "Bild laden" (not Bin Laden ). After you're done editing the graphic click "Pic to hex". Repeat step 5 untill you're done with all the frames. Save the fls in "Datei" => "Flash spechern". Correct Checksums with "N-free". Flash-it to your phone, update FAID using "K-nok" or other tool and thats it. 6. To modify the slide: Check the "Start, Spiel, Gewinn". From g3n0lite ,copy the offset for slide frame 1 Example: (Offset for slide frame #1: hex: 00120DFC dec: 1183228) In this example its the number after "dec:". Click "Offset lesen" then click "Hex to pic". Now you see the first picture .Click "Bild loschen" if you want to clear the image and start from scratch. You can also open bitmap files : in "Datei" menu, chose "Bild laden". After you're done editing the graphic click "Pic to hex". Repeat step 6 untill you're done with all the slide frames. Save the fls in "Datei" => "Flash spechern".Correct Checksums with "N-free". Flash-it to your phone, update FAID using "K-nok" or other tool and thats it. You will find "Poodriver" here http://nokiafree.org/forums/t16155/s.html Enjoy!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How To Create Your Own Murder Mystery Party	IPMART	ipmart WebShop	0	10-13-2009 14:00
How to create your own VSM file / replace image in VSM file	BlackberryOS	GSM Programming & Reverse Engineering	0	09-06-2009 02:28
How to create your own dictionary?	GSMtricks	Chinese Cocktail	3	11-27-2007 18:14
+ Create your own 3D photos using your mobile phone	apocalypso	Nokia Multimedia	2	06-01-2007 18:39
How to create your own screensaver for 3310?	cresta	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	08-14-2001 11:55

02-22-2003, 22:46	#2 (permalink)
fonec No Life Poster Join Date: Apr 2002 Location: egypt Age: 54 Posts: 5,072 Member: 11101 Status: Offline Sonork: 100.1641000 Thanks Meter: 1,783	thanks good work

02-24-2003, 11:34	#3 (permalink)
.::AkhavanGSM::. No Life Poster Join Date: Jun 2002 Location: Iran Age: 47 Posts: 1,082 Member: 12724 Status: Offline Thanks Meter: 30	OK!!!

02-25-2003, 16:51	#4 (permalink)
adrianpopa Junior Member Join Date: Feb 2003 Age: 45 Posts: 12 Member: 22550 Status: Offline Thanks Meter: 0	Glad to hlp! I found out there's an english version out. That shoul help!

03-05-2003, 23:33	#5 (permalink)
BesTCooL No Life Poster Join Date: Dec 2002 Location: TURKEY Age: 44 Posts: 3,285 Member: 18442 Status: Offline Sonork: 111110 Thanks Meter: 622	Hey great way but I used hexgraph 1.0 this better nice soft Thnks

03-06-2003, 09:30	#6 (permalink)
alrbee Freak Poster Join Date: Nov 2001 Location: Here Age: 44 Posts: 260 Member: 7676 Status: Offline Thanks Meter: 4	Vary nice , Keep good working ,,, Thanks

03-06-2003, 13:52	#7 (permalink)
adrianpopa Junior Member Join Date: Feb 2003 Age: 45 Posts: 12 Member: 22550 Status: Offline Thanks Meter: 0	@ alrbee You're welcome!