8210 is turning off - GSM-Forum

Asskicker · 11-02-2001, 15:30

If i register to the network the n the phone automaticly shut down. Need to flash it?

Pandemonio100 · 11-02-2001, 22:09

No i think your problem is PA change it. <img src="wink.gif" border="0">

zizo · 11-02-2001, 23:38

I think tha you have to flash the phone it may help, but do not forget to backup your phone first.

 Good luck

MDR · 11-03-2001, 09:37

you just can't flash a phone coz there's something wrong.... flashing is always the last resort. just b'coz it auto shuts off, you have to flash it. flashing is software. most of the auto shut problems are hardware.

Asskicker · 11-03-2001, 17:24

What is PA?

I flashed it with a full backup but i didnt work so has to be a hardware problem. Anyone have any suggestions?

trafix · 11-03-2001, 19:28

try to resolder n300 if not reflow ccont i.c <img src="smile.gif" border="0">

zizo · 11-06-2001, 12:44

Have you checked the hardware or not

Asskicker · 11-07-2001, 19:28

try to resolder n300 if not reflow ccont i.c?? Sorry i am not a genius about hardware.

Asskicker · 11-14-2001, 11:53

Can somebody help me further? Or make a drawing wich part i got to desolder?

Sandman · 11-14-2001, 18:00

PA = power amplifier,it is covered by a square silver plated above at the back of the pcb!you can see it co'z it's the biggest.

ccont i.c. = it is the power supply i.c.!kindly check the board look for it!it is black in color!its in the middle of the board.read all the i.c.'s so you can know!

-------------------------------------------------

 kick butt first, take names later

best regards to all...

Asskicker · 11-15-2001, 09:03

Thanx m8

11-02-2001, 15:30	#1 (permalink)
Asskicker Major Poster Join Date: Jun 2001 Location: Holland Posts: 46 Member: 5086 Status: Offline Thanks Meter: 0	8210 is turning off If i register to the network the n the phone automaticly shut down. Need to flash it?

11-02-2001, 23:38	#3 (permalink)
zizo Freak Poster Join Date: Nov 2000 Location: Sweden Posts: 260 Member: 2628 Status: Offline Thanks Meter: 0	I think tha you have to flash the phone it may help, but do not forget to backup your phone first. <br />Good luck

11-07-2001, 19:28	#8 (permalink)
Asskicker Major Poster Join Date: Jun 2001 Location: Holland Posts: 46 Member: 5086 Status: Offline Thanks Meter: 0	try to resolder n300 if not reflow ccont i.c??<br />Sorry i am not a genius about hardware.

11-14-2001, 11:53	#9 (permalink)
Asskicker Major Poster Join Date: Jun 2001 Location: Holland Posts: 46 Member: 5086 Status: Offline Thanks Meter: 0	Can somebody help me further?<br />Or make a drawing wich part i got to desolder?

11-14-2001, 18:00	#10 (permalink)
Sandman No Life Poster Join Date: Nov 2001 Location: Never Land Posts: 924 Member: 7277 Status: Offline Sonork: 100.42158 Thanks Meter: 68	PA = power amplifier,it is covered by a square silver plated above at the back of the pcb!you can see it co'z it's the biggest. ccont i.c. = it is the power supply i.c.!kindly check the board look for it!it is black in color!its in the middle of the board.read all the i.c.'s so you can know! ------------------------------------------------- <br />kick butt first,<br />take names later best regards to all...

11-02-2001, 22:09	#2 (permalink)
Pandemonio100 No Life Poster Join Date: Feb 2001 Location: ITALY Age: 51 Posts: 3,969 Member: 3381 Status: Offline Thanks Meter: 1,171	No i think your problem is PA change it. <img src="wink.gif" border="0">

11-03-2001, 09:37	#4 (permalink)
MDR No Life Poster Join Date: Apr 2000 Location: Philippines Posts: 555 Member: 1272 Status: Offline Thanks Meter: 3	you just can't flash a phone coz there's something wrong.... flashing is always the last resort. just b'coz it auto shuts off, you have to flash it. flashing is software. most of the auto shut problems are hardware.

11-03-2001, 17:24	#5 (permalink)
Asskicker Major Poster Join Date: Jun 2001 Location: Holland Posts: 46 Member: 5086 Status: Offline Thanks Meter: 0	What is PA? I flashed it with a full backup but i didnt work so has to be a hardware problem. Anyone have any suggestions?

11-03-2001, 19:28	#6 (permalink)
trafix No Life Poster Join Date: Jun 2001 Location: Philippines Age: 47 Posts: 942 Member: 4873 Status: Offline Thanks Meter: 5	try to resolder n300 if not reflow ccont i.c <img src="smile.gif" border="0">

11-06-2001, 12:44	#7 (permalink)
zizo Freak Poster Join Date: Nov 2000 Location: Sweden Posts: 260 Member: 2628 Status: Offline Thanks Meter: 0	Have you checked the hardware or not

11-15-2001, 09:03	#11 (permalink)
Asskicker Major Poster Join Date: Jun 2001 Location: Holland Posts: 46 Member: 5086 Status: Offline Thanks Meter: 0	Thanx m8

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
samsung a640 signal is turn off	maxheadquarters	Various CDMA/TDMA Cell Phones	0	03-18-2007 16:07
Nokia 3310 is turning off in talk	invision	Nokia Hardware & Hardware Repair	12	02-27-2005 04:06
t68i is turning off	prezes	Sony Ericsson Hardware Repair	1	04-04-2004 17:17
nokia 5510 is turning off after switching on	demboch	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	01-28-2004 17:43
8210 auto turn off	asas	Nokia Hardware & Hardware Repair	8	10-31-2003 23:29