Contact Service!! But have Backup! - GSM-Forum

4Schakal · 01-24-2002, 16:53

Hello @ all!!!

I unlocked a 3310 V5.03 with the Methode Flashing file 3310_503.fls from 0280000 - 0400000. Then with Winlock the 4. Lock with ?????????? then simlock close. Than flash original partial from 0280000 - 0400000 back. Don´t Work! So I tried again, but first I flashed original Full Backup. Then say´s "Contact Service"

The Backup is good I searched it with DCT Flasher by Rolis "Scan for CHK errors" But it say´s everything is ok. And the Backup is like 2MB.

What can I do? Please can anyone help me?

mudboy · 01-24-2002, 22:12

You cant flash phone with another EEPROM area = 003D0000- 00400000 Put you original backup back and write partial which is from 00280000 to 00290000

regards

4Schakal · 01-25-2002, 13:53

Ok, Thank you!

I´ll try it and tell you later

hooi76 · 01-26-2002, 05:03

i have a 3310 and mistakenly flash the original backup from 00400000-00xxxxx..... and i flash back original BACKUP from 00200000-00400000 and the phone now shows contact service... <img src="confused.gif" border="0"> <img src="mad.gif" border="0"> please help

[ 26 January 2002 05:05: Message edited by: hooi76 ]

4Schakal · 01-26-2002, 13:10

I´ve tried to Flash the original partial from 00280000 - 00290000. But also say´s Caontact Service. The Partial is 64 KB.

And it is also already the same when a make Full Backup from 00200000 - 00400000. Say´s Contact Service. The Full Backup is 2MB and I mean good.

The Flasher is good, too! I Unlocked a 3210 V5.36 end it worked! So what make i wrong?

Can I send anyone my Backup to check it for problems? Please!

Thanx for reading!

F C · 01-26-2002, 14:43

hi..

buddy you are just destroying your phone and nothing more!!

1-- first flash your original backup from 20--40

2- than see what happened-- your set should be normal -- in locked state 3- now use the flash files to remove the sim card rejected...

==== remember always bacup the eprom and dont over write it ===in future

regards gohar <img src="wink.gif" border="0"> <img src="smile.gif" border="0"> <img src="wink.gif" border="0">

4Schakal · 01-26-2002, 19:58

I said it again!

1. I have flash the the Full Backup 20 - 40. Then switch on the phone, first it say´s Simcard not accepted (that´s normal, I know) But like one second it goes out, than on again automatically and say´s "Contact Service" I can try it how often I can it´s already the same.

2. I know normal, it mußt be in locked state. But I don´t konw why? The BU is good. Don´t know what I make wrong.

3. In Version V5.03 you can´t only use the Falshfile, I think. If you do that, you Unlocked it but you haven´t got any receive.

But thank you for Helping!

hooi76 · 01-27-2002, 04:18

what happen if over write? started from 00400000-005ff000. can i read from other phone and write it back to the phone?

PTR999 · 01-27-2002, 07:38

Hi , u say that ur phone first says insert card then shows contact service ...right .,

i suggest u try to repair ur saved backup file with nfree then load the repaired file ,

goodluck

pete <img src="wink.gif" border="0">

4Schakal · 01-27-2002, 18:20

Yes, I have heard from a other guy that I mußt check with nfree my file.

He mean when there is anywhere standing fffff it is bad, but I don´t read something like that.

I clicked all "Repair - Correct...." Buttons.

On the Button "Correct MCU Checksum" he said, " `0x<F´ is not a valid value " or something like that.

Is that the error?

01-24-2002, 16:53	#1 (permalink)
4Schakal Junior Member Join Date: Jan 2002 Location: D Posts: 14 Member: 8859 Status: Offline Thanks Meter: 5	Contact Service!! But have Backup! Hello @ all!!! I unlocked a 3310 V5.03 with the Methode Flashing file 3310_503.fls from 0280000 - 0400000.<br />Then with Winlock the 4. Lock with ??????????<br />then simlock close.<br />Than flash original partial from 0280000 - 0400000<br />back.<br />Don´t Work! So I tried again, but first I flashed original Full Backup. Then say´s "Contact Service" The Backup is good I searched it with DCT Flasher by Rolis "Scan for CHK errors" But it say´s everything is ok.<br />And the Backup is like 2MB. What can I do? Please can anyone help me?

01-24-2002, 22:12	#2 (permalink)
mudboy No Life Poster Join Date: Apr 2001 Location: Czech Republic Posts: 1,059 Member: 4246 Status: Offline Thanks Meter: 9	You cant flash phone with another EEPROM area = 003D0000- 00400000<br />Put you original backup back and write partial which is from 00280000 to 00290000 regards

01-26-2002, 05:03	#4 (permalink)
hooi76 No Life Poster Join Date: Dec 2001 Location: In front of my computer Posts: 1,594 Member: 7741 Status: Offline Thanks Meter: 111	i have a 3310 and mistakenly flash the original backup from 00400000-00xxxxx..... and i flash back original BACKUP from 00200000-00400000 and the phone now shows contact service... <img src="confused.gif" border="0"> <img src="mad.gif" border="0"> please help <FONT COLOR="#ffff00" SIZE="1">[ 26 January 2002 05:05: Message edited by: hooi76 ]</font>

01-26-2002, 13:10	#5 (permalink)
4Schakal Junior Member Join Date: Jan 2002 Location: D Posts: 14 Member: 8859 Status: Offline Thanks Meter: 5	I´ve tried to Flash the original partial from <br />00280000 - 00290000.<br />But also say´s Caontact Service.<br />The Partial is 64 KB. And it is also already the same when a make Full Backup from 00200000 - 00400000.<br />Say´s Contact Service.<br />The Full Backup is 2MB and I mean good. The Flasher is good, too! I Unlocked a 3210 V5.36 end it worked!<br />So what make i wrong? Can I send anyone my Backup to check it for problems?<br />Please! Thanx for reading!

01-26-2002, 14:43	#6 (permalink)
F C No Life Poster Join Date: Sep 2001 Location: London, UK Posts: 2,294 Member: 6486 Status: Offline Sonork: 100.79846 Thanks Meter: 350	hi.. buddy you are just destroying your phone and nothing more!! 1-- first flash your original backup from 20--40 2- than see what happened-- your set should be normal -- in locked state <br />3- now use the flash files to remove the sim card rejected... ==== remember always bacup the eprom and dont over write it ===in future regards<br />gohar <img src="wink.gif" border="0"> <img src="smile.gif" border="0"> <img src="wink.gif" border="0">

01-25-2002, 13:53	#3 (permalink)
4Schakal Junior Member Join Date: Jan 2002 Location: D Posts: 14 Member: 8859 Status: Offline Thanks Meter: 5	Ok, Thank you! I´ll try it and tell you later

01-26-2002, 19:58	#7 (permalink)
4Schakal Junior Member Join Date: Jan 2002 Location: D Posts: 14 Member: 8859 Status: Offline Thanks Meter: 5	I said it again! 1. I have flash the the Full Backup 20 - 40.<br /> Then switch on the phone, first it say´s <br /> Simcard not accepted (that´s normal, I know)<br /> But like one second it goes out, than on <br /> again automatically and say´s "Contact <br /> Service"<br /> I can try it how often I can it´s already the <br /> same. 2. I know normal, it mußt be in locked state.<br /> But I don´t konw why? The BU is good. Don´t <br /> know what I make wrong. 3. In Version V5.03 you can´t only use the <br /> Falshfile, I think. If you do that, you <br /> Unlocked it but you haven´t got any receive. But thank you for Helping!

01-27-2002, 04:18	#8 (permalink)
hooi76 No Life Poster Join Date: Dec 2001 Location: In front of my computer Posts: 1,594 Member: 7741 Status: Offline Thanks Meter: 111	what happen if over write? started from 00400000-005ff000. <br />can i read from other phone and write it back to the phone?

01-27-2002, 07:38	#9 (permalink)
PTR999 No Life Poster Join Date: Feb 2001 Location: Fairyland Posts: 690 Member: 3383 Status: Offline Thanks Meter: 3	Hi ,<br />u say that ur phone first says insert card then shows contact service ...right ., i suggest u try to repair ur saved backup file with nfree then load the repaired file , goodluck pete <img src="wink.gif" border="0">

01-27-2002, 18:20	#10 (permalink)
4Schakal Junior Member Join Date: Jan 2002 Location: D Posts: 14 Member: 8859 Status: Offline Thanks Meter: 5	Yes, I have heard from a other guy that I mußt check with nfree my file. He mean when there is anywhere standing fffff it is bad, but I don´t read something like that. I clicked all "Repair - Correct...." Buttons. On the Button "Correct MCU Checksum" he said,<br />" `0x<F´ is not a valid value " or something like that. Is that the error?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
help.. 1600 in battery contact service,but in ufs insert sim	CHAPRAN	Nokia Hardware & Hardware Repair	20	03-17-2008 19:22
6610i contact service but with twister working properly	miq	Nokia Hardware & Hardware Repair	0	01-04-2005 17:09
6610 Contact Service but work in selftest!!!	kingbode	Nokia Digital Core Technology 4 ( DCT-4 )	5	10-29-2004 09:37
contact service but f/mbus not working	kalpi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-14-2003 14:00