NSE-5 Security Code

Hi guys,
Seems to be a problem for me. This phone is not locked, only asks for sec. code. Reading it with LogoManager and NokiaTool by Koci 2.60 shows 12345. After entering says wrong code. So how to reset the factory defauls?
No program can do it for me.
I even tryed to start WinTesla manualy with different DLL's and reset it, but no luck.

Interesting thing is that first only LogoManager was able to read the sec. code, after reset the factory values in WinTesla using NSE-3 DLL's (not NSE-5) the Koci Tool start reading the sec. code. Any idea why?

Best Regards

[JJS]

Does Nokia tool 2.60 by Koci need some special trick to work? It doesn't work for me. The same cable of noktool by pro, winlock, wintesla, and is the only prog the doesn't work. Can you give me any hint??

What is your version of Logomanager?? Mine is 1.1b6 and reads my 7110 v4.88. Sometimes it is need to read from phone again, because when logomanager starts, starts with cached data!. Anyway, in those cases of wrong sec.code, in the oldes phones, if we remove batery, after 1 hour, the sec code returned to the red one, along with the clock reset!

[HIGHWAYMAN]

Welcome.
To my new club.
( for pissed-off 7110 owners! )

the bottom line is - nokia changed the commands and ****ed us!!!

We need Cracked NSE-5 DLL's.

Btw. using the wrong dll's can seriously **** your fone so dont try that again!!!!!!!!!!

L8r.

[MDR]

try using nokiatool by pro 034

plug the 7110 check the small boxes in the middle and click the button "apply sfs"

------------------

[HIGHWAYMAN]

MDR - your name sounds familier!

If i do as you say and it dont work.(and it dont work!)
and it resets my config bytes for things such as display-contrast.(and it does!)
and i cant see the ****ing display properly anymore.(and it happened 2 some other poor bastard on this forum!)

WILL YOU STOP POSTING?

OR

POST A LINK FOR CRACKED DLL's!!!!!

L8r.

[Y2K]

dear highwayman

first of all in your postings are many "..." words!
can't you post normal way?

second i'm not(and other in board) a poor bastard!

and do not blame friends like mdr!

for the dll's : why you don't crack it for your own???

you will work on mobile so you have to work first on software

my best regards Y2K

[MODCHIPS]

Respect to your comments marc (y2k)
know days evry 1 just want want !!!

[Y2K]

dear Bph&co

hope the att. on mail will help let me know...

hi maz, nice to see you still there

best regards

Hi everybody,
Thanks for your responce and help. I know MDR is a good guy and don't deserve to be 'killed'(joke!).
I read everything in this forum and I know that NSE-5 DLL's using new commands. Also I'm one of these poor 'b...s' who killed the
contrast on 4.88. But that's not a disaster because the owner closed all 4 locks by accident(???) before that and I was just experimenting.
So my friend was really laughing at me because that's just a security code.
Thanks Y2K for your help. You are great friend. I'll try it tommorow and I'll let you
know.


Best Regards

To JJS,

Because most of the cables using power supply for the MAX chip from DTR and RTS lines of RS-232 port it's possible these lines to be declared as LOW on software
level( specialy demo ver. of the programs).
Just try ext. power supply for the interface.

Regards

[This message has been edited by Bph&co (edited 30 September 2000).]

[JJS]

Thanks for yor answer, Bph&co, but my cable is original Dau9-p. So, you may be wright. I'm going to ask a friend who has an "home made" interface with external power and try it. But the funny thing is that all the other progs (winlock, tesla, noktool by pro, zulea's dos prog) work with this cable!

[WildSwan]

Can I have a working copy of KOCI tools?

Thanks.

Please send it to [email protected]

Originally posted by Bph&co:
Hi guys,
Seems to be a problem for me. This phone is not locked, only asks for sec. code. Reading it with LogoManager and NokiaTool by Koci 2.60 shows 12345. After entering says wrong code. So how to reset the factory defauls?
No program can do it for me.
I even tryed to start WinTesla manualy with different DLL's and reset it, but no luck.

Interesting thing is that first only LogoManager was able to read the sec. code, after reset the factory values in WinTesla using NSE-3 DLL's (not NSE-5) the Koci Tool start reading the sec. code. Any idea why?

Best Regards

[havy]

I have security code reader mail me : [email protected]

Originally posted by Bph&co:
Hi guys,
Seems to be a problem for me. This phone is not locked, only asks for sec. code. Reading it with LogoManager and NokiaTool by Koci 2.60 shows 12345. After entering says wrong code. So how to reset the factory defauls?
No program can do it for me.
I even tryed to start WinTesla manualy with different DLL's and reset it, but no luck.

Interesting thing is that first only LogoManager was able to read the sec. code, after reset the factory values in WinTesla using NSE-3 DLL's (not NSE-5) the Koci Tool start reading the sec. code. Any idea why?

Best Regards

[HARRY.CO.UK]

Originally posted by havy:
I have security code reader mail me : [email protected]

can you send to me also please.

thanks in advance

[HARRY.CO.UK]

Originally posted by havy:
I have security code reader mail me : [email protected]

can you send to me also please.

thanks in advance