1600 no signal after flash - GSM-Forum

tonyg_253 · 05-24-2007, 13:29

Hey guys, i had a customer with a voda 1600, and needed unlocking.
with voda sim the phone was working b4 i got to it.
usually i just downgrade firmware to 3.42 and flash a good pm and
away we go.
but, i have done this and now the phone is unlocked, but when booted up.
the phone shows signal for about 3 seconds and nothing, i have got no idea why. but the phone had signal originaly.

any idea's

Tony

Buttsb · 05-24-2007, 13:38

reflash with a good file
write a good pm
and check its band

..::Sunil::.. · 05-24-2007, 13:39

Quote:

Originally Posted by tonyg_253

Hey guys, i had a customer with a voda 1600, and needed unlocking.
with voda sim the phone was working b4 i got to it.
usually i just downgrade firmware to 3.42 and flash a good pm and
away we go.
but, i have done this and now the phone is unlocked, but when booted up.
the phone shows signal for about 3 seconds and nothing, i have got no idea why. but the phone had signal originaly.

any idea's

Tony

Problem is bad pm...Try with these steps...

Erase flash
Full falsh
Write pm (Use Attached pm )
ulsetting....

B.r.
Sunil.

tonyg_253 · 05-24-2007, 14:11

100% spot on - after following psunil and buttsb advice the phone is working like a charm.

erase flash, flash mcu,lang,cnt and flash psunil pm, fact def and init simlocks and away we go.
thanks heaps guys

much appreciated

br
Tony

Allunlockingsource · 05-26-2007, 18:51

Brother write good pm file .................................

unreal002 · 05-29-2007, 22:14

can someone please post good PM file for 1600b (rh-65) and 1112b (rh-92)?

also, is it possible to use rh-64 pm on a rh-65 model?

thanks !

smartvickey · 05-30-2007, 05:16

thanxxxxxxxxxxxxxxxxxx

sms-india · 12-11-2007, 08:04

Quote:

Originally Posted by ..::Sunil::..

Problem is bad pm...Try with these steps...

Erase flash
Full falsh
Write pm (Use Attached pm )
ulsetting....

B.r.
Sunil.

in my 1600 ,when i switch on the phone, signal comes full. but it goes after 5 sec. i will change pf and haggar, and write your good pm. but phone is in same condition.... please help me.....

05-24-2007, 13:29	#1 (permalink)
tonyg_253 Freak Poster Join Date: May 2006 Location: Queensland, Australia Posts: 143 Member: 273044 Status: Offline Thanks Meter: 10	1600 no signal after flash Hey guys, i had a customer with a voda 1600, and needed unlocking. with voda sim the phone was working b4 i got to it. usually i just downgrade firmware to 3.42 and flash a good pm and away we go. but, i have done this and now the phone is unlocked, but when booted up. the phone shows signal for about 3 seconds and nothing, i have got no idea why. but the phone had signal originaly. any idea's Tony

05-29-2007, 22:14	#6 (permalink)
unreal002 Freak Poster Join Date: Jan 2007 Location: usa Age: 39 Posts: 106 Member: 438379 Status: Offline Thanks Meter: 0	please help can someone please post good PM file for 1600b (rh-65) and 1112b (rh-92)? also, is it possible to use rh-64 pm on a rh-65 model? thanks !

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1600 no signal after 5 second	inti_cell	Nokia Hardware & Hardware Repair	10	01-10-2009 17:31
E250 No speaker, no mic, no signal after flash.	Raklm	NSPRO	6	09-01-2008 05:16
No Signal After Flash 2100 Knok	nesteam	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	13	05-01-2007 14:08
8250 no signal after flashing	WaleedAM	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	02-09-2002 22:00
6210 No Signal after Flashing	raga0001	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	01-03-2002 10:35

05-24-2007, 13:38	#2 (permalink)
Buttsb Freak Poster Join Date: Nov 2005 Location: KSA Posts: 304 Member: 201126 Status: Offline Thanks Meter: 1	reflash with a good file write a good pm and check its band

05-24-2007, 14:11	#4 (permalink)
tonyg_253 Freak Poster Join Date: May 2006 Location: Queensland, Australia Posts: 143 Member: 273044 Status: Offline Thanks Meter: 10	100% spot on - after following psunil and buttsb advice the phone is working like a charm. erase flash, flash mcu,lang,cnt and flash psunil pm, fact def and init simlocks and away we go. thanks heaps guys much appreciated br Tony

05-26-2007, 18:51	#5 (permalink)
Allunlockingsource No Life Poster Join Date: Aug 2006 Location: SPAIN-----UK Posts: 2,037 Member: 333439 Status: Offline Sonork: 100.1589101 Thanks Meter: 623	Brother write good pm file .................................

05-30-2007, 05:16	#7 (permalink)
smartvickey Freak Poster Join Date: Mar 2007 Location: INDIA Posts: 149 Member: 478517 Status: Offline Thanks Meter: 83	thanxxxxxxxxxxxxxxxxxx