3100 no lights on screen - GSM-Forum

rdf009 · 07-16-2007, 04:44

i have 3100 water damage no lights on screen any one can help me???

wilson10 · 07-16-2007, 05:17

did u try changing the lcd??....

if yes and still no lights...repalce the coil under the uem..

hope it can help!!!

jimm07ct · 07-16-2007, 05:59

HI BRO,

1st try to change lcd

2nd try to change coil , if not ok

post reply

best of luck

jimmy

kramlester_14 · 07-17-2007, 11:32

check the lines of the lcd connector!

Mourad120 · 07-20-2007, 05:05

Quote:

Originally Posted by rdf009

i have 3100 water damage no lights on screen any one can help me???

well , no lights on screen might be caused by :

LCD LEDS damaged --> replace it .

LCD Connector---> check it out .

Light Driver cricuit ----> check it out .

sudais_rizwan · 07-20-2007, 16:11

there is a connection from the right of the lcd connector point no 2 from top to the lights regulator under the uem check it if its broken then bridge the wire 4m there i am confident its gonna work ....

Harisk · 07-20-2007, 17:23

Check these connections for continuity and if any one open put jumber. Best of luck.

GsmMunna · 07-21-2007, 20:16

@ Harisk

Good Work This will Help Many Members....!!!

JHON_DREAM · 07-21-2007, 22:59

chk this pic about problem of 3100/6100 problem.

BEST OF LUCK,
JHON.

al_saadi · 07-23-2007, 08:57

than to harisk and jhon dream for this good idia i was have a proplem like this but now i can work good with this proplems thank for everybody

rdf009 · 07-27-2007, 05:35

problem solve thanx a lot brothers... for sharing all your idea thanx a lot once again 100% works... until now still working my 3100 cp.

rdf009 · 07-27-2007, 05:37

Good Work All Guys,....

SAN INFOTECH · 07-27-2007, 06:57

try this solution
sanjuwatch

..::Sunil::.. · 07-27-2007, 08:00

Good work bro Harisk....Thanks....

07-16-2007, 04:44	#1 (permalink)
rdf009 Major Poster Join Date: Sep 2006 Location: CDO, Philippines Age: 33 Posts: 40 Member: 342199 Status: Offline Thanks Meter: 5	3100 no lights on screen i have 3100 water damage no lights on screen any one can help me???

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
3100 no light in screen and keypad plz help	goga3000	Nokia Hardware & Hardware Repair	18	03-30-2010 17:15
no light on screen nokia 1110,1600	obioha	Nokia Hardware & Hardware Repair	3	12-11-2006 17:02
6230 no lights on screen or keypad	paniman	Nokia Digital Core Technology 4 ( DCT-4 )	0	01-11-2006 20:20
v500 no light on screen ?	TRABEL	Motorola Hardware Repair	3	11-20-2005 09:33
please help me z200 no light on screen	segun	Sony Ericsson Hardware Repair	12	08-01-2005 11:00

07-16-2007, 05:17	#2 (permalink)
wilson10 Insane Poster Join Date: Apr 2006 Location: Malabon City, Philippines Age: 47 Posts: 61 Member: 255148 Status: Offline Thanks Meter: 1	did u try changing the lcd??.... if yes and still no lights...repalce the coil under the uem.. hope it can help!!!

07-16-2007, 05:59	#3 (permalink)
jimm07ct No Life Poster Join Date: Jan 2007 Location: agrabad,ctg,Bangladesh Age: 41 Posts: 1,406 Member: 426688 Status: Offline Sonork: 100.1596204 Thanks Meter: 524	HI BRO, 1st try to change lcd 2nd try to change coil , if not ok post reply best of luck jimmy

07-17-2007, 11:32	#4 (permalink)
kramlester_14 Freak Poster Join Date: Dec 2006 Location: gsmforum by zfrank Posts: 224 Member: 405608 Status: Offline Sonork: marklester Thanks Meter: 47	check the lines of the lcd connector!

07-20-2007, 16:11	#6 (permalink)
sudais_rizwan Insane Poster Join Date: Jul 2006 Location: Cape Town South Africa Age: 41 Posts: 66 Member: 321039 Status: Offline Thanks Meter: 15	there is a connection from the right of the lcd connector point no 2 from top to the lights regulator under the uem check it if its broken then bridge the wire 4m there i am confident its gonna work ....

07-21-2007, 20:16	#8 (permalink)
GsmMunna No Life Poster Join Date: May 2004 Location: A ROUGH ROAD LEADS 2 THE STARS Posts: 3,452 Member: 66937 Status: Offline Thanks Meter: 5,053	@ Harisk Good Work This will Help Many Members....!!!

07-23-2007, 08:57	#10 (permalink)
al_saadi Junior Member Join Date: Jun 2007 Posts: 6 Member: 537144 Status: Offline Thanks Meter: 0	than to harisk and jhon dream for this good idia i was have a proplem like this but now i can work good with this proplems thank for everybody

07-27-2007, 05:35	#11 (permalink)
rdf009 Major Poster Join Date: Sep 2006 Location: CDO, Philippines Age: 33 Posts: 40 Member: 342199 Status: Offline Thanks Meter: 5	problem solve thanx a lot brothers... for sharing all your idea thanx a lot once again 100% works... until now still working my 3100 cp.

07-27-2007, 05:37	#12 (permalink)
rdf009 Major Poster Join Date: Sep 2006 Location: CDO, Philippines Age: 33 Posts: 40 Member: 342199 Status: Offline Thanks Meter: 5	Good Work All Guys,....

07-27-2007, 08:00	#14 (permalink)
..::Sunil::.. Banned Join Date: Jan 2007 Location: India Age: 34 Posts: 2,705 Member: 432364 Status: Offline Thanks Meter: 270	Good work bro Harisk....Thanks....