repair 7250i contact service - Page 2 - GSM-Forum

artineo · 09-16-2003, 21:41

Today i try flash 7250i again. When I flash 7250i v3.22 i get CS. Problem not solved with PMM file 7250i.pm - still CS. With griffin i make test :
All tests passed without "ST_SW_TYPE_VALIDITY_TEST.........fail

"
With firmware from 7250 v.3.12 phone works fine, but with 7250i v.322 (this soft was original) i have CS. What i must do for repair this "ST_SW_TYPE_VALIDITY" ??

Thank You
Sorry for my english

Burnt Cobba · 09-17-2003, 07:57

tried 3.22 which is for NHL-4jX. It turned the thing in CS.

redid it using 3.14 and all was ok.

btw the product code as shown by griffin is 0 too but phone works ok.

br al

Dream gsm · 09-18-2003, 18:43

Ooooops....
I also made mistake and flashed 7250 to 7250i... I reflashed it with 7250i but I got "Contact Service"... Anybody have PMM file to repair phone (dosse'nt mather it would be 7250 or 7250i...) - I only want to have repaired phone.... PLEASE HELP I AM DESSPERED!!!!!!!!!!!!!!!!!!!!!!!!!

Regards

vanitas69 · 09-18-2003, 20:06

@Dream gsm: If you still need 7210 PMM file, download from your "customer server" seller of Griffin Box latest installation v2.02, install and check C:\Program Files\Nokia\Phoenix\pm\ ... here you will have 7210 PPM file i think

Dream gsm · 09-18-2003, 20:59

@vanitas69: THX for reply but I allerady discovered it... MY PHONE IS ALIVE AGAIN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Burnt Cobba · 09-23-2003, 21:22

met the same problem with the 7250 that had messed up PMM values. Somehow it worked ok for some time and then CS showed up.

Tried to write the 7250.pm file, flashed it with v3.12 and still CS.

anyone got a pm file from a working one pls? Maybe i can revive this one

thanks a lot
al

Burnt Cobba · 09-24-2003, 21:37

read teh PMM values fro ma good 7250 (NOT i) and falshed it with v3.12. Still it is in CS. factory reset done ok too.

trying to unlock it is useless.

anyone can help pls?
thanks
al

Burnt Cobba · 09-24-2003, 21:49

problem fixed

my error was that i was trying to fix the simlock area when it was in CS :P. Should get a nice sleep ... can barely see the monitor.

thanks to all of you for the help mates
al

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
need RPL file for repair 7250i contact service	espoir1	Nokia Digital Core Technology 4 ( DCT-4 )	2	04-13-2004 18:37
7250i contact service	tatalko	Nokia Digital Core Technology 4 ( DCT-4 )	1	10-31-2003 02:35
7250i Contact Service Please help!	qwerthj	Nokia Digital Core Technology 4 ( DCT-4 )	0	10-18-2003 20:31
7250I contact service	osama44	Nokia Digital Core Technology 4 ( DCT-4 )	4	10-01-2003 17:15
7250i contact service	\|flux\|	Nokia Digital Core Technology 4 ( DCT-4 )	4	09-03-2003 10:28

09-16-2003, 21:41	#16 (permalink)
artineo Insane Poster Join Date: Aug 2003 Location: POLAND Gdansk Age: 45 Posts: 92 Member: 36315 Status: Offline Thanks Meter: 0	Today i try flash 7250i again. When I flash 7250i v3.22 i get CS. Problem not solved with PMM file 7250i.pm - still CS. With griffin i make test : All tests passed without "ST_SW_TYPE_VALIDITY_TEST.........fail " With firmware from 7250 v.3.12 phone works fine, but with 7250i v.322 (this soft was original) i have CS. What i must do for repair this "ST_SW_TYPE_VALIDITY" ?? Thank You Sorry for my english

09-17-2003, 07:57	#17 (permalink)
Burnt Cobba No Life Poster Join Date: Apr 2002 Location: The Green Mile Posts: 3,653 Member: 11325 Status: Offline Thanks Meter: 266	tried 3.22 which is for NHL-4jX. It turned the thing in CS. redid it using 3.14 and all was ok. btw the product code as shown by griffin is 0 too but phone works ok. br al

09-18-2003, 18:43	#18 (permalink)
Dream gsm Freak Poster Join Date: Jul 2001 Location: Poland Posts: 429 Member: 5361 Status: Offline Thanks Meter: 8	Ooooops.... I also made mistake and flashed 7250 to 7250i... I reflashed it with 7250i but I got "Contact Service"... Anybody have PMM file to repair phone (dosse'nt mather it would be 7250 or 7250i...) - I only want to have repaired phone.... PLEASE HELP I AM DESSPERED!!!!!!!!!!!!!!!!!!!!!!!!! Regards

09-18-2003, 20:06	#19 (permalink)
vanitas69 Freak Poster Join Date: Mar 2001 Posts: 163 Member: 3620 Status: Offline Thanks Meter: 0	@Dream gsm: If you still need 7210 PMM file, download from your "customer server" seller of Griffin Box latest installation v2.02, install and check C:\Program Files\Nokia\Phoenix\pm\ ... here you will have 7210 PPM file i think

09-18-2003, 20:59	#20 (permalink)
Dream gsm Freak Poster Join Date: Jul 2001 Location: Poland Posts: 429 Member: 5361 Status: Offline Thanks Meter: 8	@vanitas69: THX for reply but I allerady discovered it... MY PHONE IS ALIVE AGAIN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

09-23-2003, 21:22	#21 (permalink)
Burnt Cobba No Life Poster Join Date: Apr 2002 Location: The Green Mile Posts: 3,653 Member: 11325 Status: Offline Thanks Meter: 266	met the same problem with the 7250 that had messed up PMM values. Somehow it worked ok for some time and then CS showed up. Tried to write the 7250.pm file, flashed it with v3.12 and still CS. anyone got a pm file from a working one pls? Maybe i can revive this one thanks a lot al

09-24-2003, 21:37	#22 (permalink)
Burnt Cobba No Life Poster Join Date: Apr 2002 Location: The Green Mile Posts: 3,653 Member: 11325 Status: Offline Thanks Meter: 266	read teh PMM values fro ma good 7250 (NOT i) and falshed it with v3.12. Still it is in CS. factory reset done ok too. trying to unlock it is useless. anyone can help pls? thanks al

09-24-2003, 21:49	#23 (permalink)
Burnt Cobba No Life Poster Join Date: Apr 2002 Location: The Green Mile Posts: 3,653 Member: 11325 Status: Offline Thanks Meter: 266	problem fixed my error was that i was trying to fix the simlock area when it was in CS :P. Should get a nice sleep ... can barely see the monitor. thanks to all of you for the help mates al