1650 keypad ic - GSM-Forum

alleti · 12-19-2009, 05:42

MENU,9,*,0, BUTTONS NOT WORK,IAMCHANGE THE KP IC, SAME PROBLEM

vaghubha_sodha · 12-19-2009, 05:46

1650 keypad
change keypad ic

1650 keypad.JPG

imran zafar · 12-19-2009, 05:47

check shortage on these keys.....if 9,*,0 keys r short then reply...

alfacell · 12-19-2009, 05:50

nice info...thanks broo..

Binoy.c · 12-19-2009, 07:06

change with a key pad ic from a motherboard again if it shows the same ...reball or change the cpu...carefully...all the best

mourad1978 · 01-25-2010, 17:03

change charge connecteur it's ok

12-19-2009, 05:42	#1 (permalink)
alleti Major Poster Join Date: Oct 2007 Posts: 41 Member: 601957 Status: Offline Thanks Meter: 6	1650 keypad ic MENU,9,*,0, BUTTONS NOT WORK,IAMCHANGE THE KP IC, SAME PROBLEM

12-19-2009, 05:46	#2 (permalink)
vaghubha_sodha No Life Poster Join Date: Jul 2008 Location: BHARAT Age: 42 Posts: 4,314 Member: 823633 Status: Offline Thanks Meter: 1,705	1650 keypad 1650 keypad change keypad ic 1650 keypad.JPG

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
all nokia keypad ic jumper by sonuall nokia keypad ic jumper	gsm junction	Nokia Hardware & Hardware Repair	4	07-29-2011 16:07
is 1600 light ic=1650 light ic	sachin_udai	Nokia Hardware & Hardware Repair	3	10-06-2009 18:41
2626 keypad IC ,light IC	seeta	Nokia Hardware & Hardware Repair	5	07-25-2008 17:14
SE keypad IC = Nokia keypad IC???	ryumahon	Sony Ericsson Hardware Repair	22	03-22-2007 09:26
SE keypad IC = Nokia keypad IC???	ryumahon	Sony Ericsson Hardware Repair	0	01-15-2006 16:40

12-19-2009, 05:47	#3 (permalink)
imran zafar No Life Poster Join Date: Aug 2006 Location: Cel_Phon - M.B.Din Posts: 1,232 Member: 328187 Status: Offline Thanks Meter: 1,687	check shortage on these keys.....if 9,*,0 keys r short then reply...

12-19-2009, 05:50	#4 (permalink)
alfacell Junior Member Join Date: Oct 2007 Location: MX-KEY is the BEST NOKIA TOOL. Age: 48 Posts: 24 Member: 603999 Status: Offline Thanks Meter: 5	nice info...thanks broo..

12-19-2009, 07:06	#5 (permalink)
Binoy.c Freak Poster Join Date: Jun 2007 Location: banglore\kerala Posts: 498 Member: 523496 Status: Offline Sonork: ammachis Thanks Meter: 76	change with a key pad ic from a motherboard again if it shows the same ...reball or change the cpu...carefully...all the best

01-25-2010, 17:03	#6 (permalink)
mourad1978 Junior Member Join Date: Mar 2007 Posts: 20 Member: 465775 Status: Offline Thanks Meter: 3	change charge connecteur it's ok