2610 contact service - GSM-Forum

pratikjh · 01-19-2008, 08:13

2610 contact service there was no network i removed pa contact service came ialso flashed with 4.90 result same
please help me urgent

manyosa · 01-19-2008, 15:57

Its hard ware faulty try to rebail or change UEM

jimm07ct · 01-20-2008, 06:09

bro,

its uem ic fault ,

try to reball or replace..........

digitized · 01-20-2008, 07:55

brthr first reball ur cpu then reball uem ......good luck

sopnil · 01-20-2008, 19:46

hi , u concept is not clear but one thing 1600/1110/1110i/2310/2610/6030 all set contact service came sim ic .the prob is sim ic some case can solved flashing time add pp file and i will do change sim ic and flash again thats all.but u have another prob net remove pa and make jumper pa .i think u problem will be solve .this way if u dont have pa jumper. then u can conntract me sopniltelecom@yahoomesenger

knoc · 02-15-2008, 15:31

if you flashed with latest mcu, ppm, cnt and pm files and problem not soved then you rehot upp. it's definitely hard ware problem

elvislano · 02-15-2008, 19:21

sir before you remove the pa what is the history of phone.... water damage or not... try to flash with high version.

01-19-2008, 08:13	#1 (permalink)
pratikjh Junior Member Join Date: Dec 2006 Posts: 28 Member: 412863 Status: Offline Thanks Meter: 0	2610 contact service 2610 contact service there was no network i removed pa contact service came ialso flashed with 4.90 result same please help me urgent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2610 Contact service	sauliux	Nokia Digital Core Technology 4 ( DCT-4 )	13	08-23-2007 01:06
2610 contact service after unlock	Amir-SkillZ	MT-BOX	9	01-25-2007 14:28
plz help me i want flashfile to correct 2610 contact service	tangthanat	Nokia Hardware & Hardware Repair	1	01-20-2007 10:06
2610 Contact Service + phone Restricted	ethiomobile	Nokia Digital Core Technology 4 ( DCT-4 )	10	01-04-2007 20:01
2610 contact service	gn02305657	Nokia Hardware & Hardware Repair	4	11-23-2006 20:13

01-19-2008, 15:57	#2 (permalink)
manyosa No Life Poster Join Date: May 2006 Location: Tanzania Posts: 1,562 Member: 271974 Status: Offline Thanks Meter: 97	Its hard ware faulty try to rebail or change UEM

01-20-2008, 06:09	#3 (permalink)
jimm07ct No Life Poster Join Date: Jan 2007 Location: agrabad,ctg,Bangladesh Age: 41 Posts: 1,406 Member: 426688 Status: Offline Sonork: 100.1596204 Thanks Meter: 524	bro, its uem ic fault , try to reball or replace..........

01-20-2008, 07:55	#4 (permalink)
digitized No Life Poster Join Date: Jul 2005 Location: ludhiana~india Age: 38 Posts: 1,465 Member: 163833 Status: Offline Sonork: 100.1579554 Thanks Meter: 5,700	brthr first reball ur cpu then reball uem ......good luck

01-20-2008, 19:46	#5 (permalink)
sopnil No Life Poster Join Date: Jun 2007 Location: dhaka,bangladesh Posts: 790 Member: 528679 Status: Offline Thanks Meter: 268	hi , u concept is not clear but one thing 1600/1110/1110i/2310/2610/6030 all set contact service came sim ic .the prob is sim ic some case can solved flashing time add pp file and i will do change sim ic and flash again thats all.but u have another prob net remove pa and make jumper pa .i think u problem will be solve .this way if u dont have pa jumper. then u can conntract me sopniltelecom@yahoomesenger

02-15-2008, 15:31	#6 (permalink)
knoc Freak Poster Join Date: Feb 2008 Location: uganda Posts: 179 Member: 705986 Status: Offline Thanks Meter: 11	if you flashed with latest mcu, ppm, cnt and pm files and problem not soved then you rehot upp. it's definitely hard ware problem

02-15-2008, 19:21	#7 (permalink)
elvislano Freak Poster Join Date: Mar 2006 Location: www.gsmpioneer.com Age: 42 Posts: 166 Member: 248086 Status: Offline Thanks Meter: 22	sir before you remove the pa what is the history of phone.... water damage or not... try to flash with high version.