who will teach? - GSM-Forum

fiZ · 07-01-2002, 13:35

Nokia 3210: NOT CHARGING!

who can will teach,how to repair this problem in details

*** for you

mr_x4you · 07-01-2002, 15:59

look at battery conectors on board ! Watch what happens when you press them with your finger as if the battery was in the phone ! If battery conector gets up from the board, this is the problem ! Remove plastic cover from pins and resolder. What happens is temperature sensor is disconected from phone and phone sees -17 degrees and in this state phone will not charge battery !

Tell me what you did !

fiZ · 07-01-2002, 16:06

conectors are ok

jonwillow · 07-01-2002, 19:52

try change 47Kom resistor on pcb(resistor stay in power pads)

gsm_boy · 07-02-2002, 12:32

Quote:

Originally posted by jonwillow
try change 47Kom resistor on pcb(resistor stay in power pads)

Hi

yes change 47Kom resistor... which is R127 in Service manual located near the Battrey connector on main board.

Good Luck

07-01-2002, 13:35	#1 (permalink)
fiZ Registered User Join Date: Feb 2002 Location: nokia Age: 48 Posts: 204 Member: 9626 Status: Offline Thanks Meter: 0	who will teach? Nokia 3210: NOT CHARGING! who can will teach,how to repair this problem in details *** for you

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Who Can Teach Me (how To Write Rpl File Step By Step)	energy02	Universalbox	6	05-13-2008 09:40
Who Can Teach Me How To Repair Phones?	sunrise gsm	Nokia Hardware & Hardware Repair	5	02-29-2008 19:26
T630 Broken on/off switch.who can teach me how to jump line , thank you	energy02	Sony Ericsson Hardware Repair	0	07-21-2006 07:23
Who can teach me how to flash?	bbbbbb	Nokia Digital Core Technology 4 ( DCT-4 )	4	07-27-2004 12:19

07-01-2002, 15:59	#2 (permalink)
mr_x4you Registered User Join Date: Jun 2001 Location: x Posts: 3,295 Member: 4989 Status: Offline Thanks Meter: 13	look at battery conectors on board ! Watch what happens when you press them with your finger as if the battery was in the phone ! If battery conector gets up from the board, this is the problem ! Remove plastic cover from pins and resolder. What happens is temperature sensor is disconected from phone and phone sees -17 degrees and in this state phone will not charge battery ! Tell me what you did !

07-01-2002, 16:06	#3 (permalink)
fiZ Registered User Join Date: Feb 2002 Location: nokia Age: 48 Posts: 204 Member: 9626 Status: Offline Thanks Meter: 0	conectors are ok

07-01-2002, 19:52	#4 (permalink)
jonwillow No Life Poster Join Date: Sep 1999 Location: Europe Age: 43 Posts: 905 Member: 461 Status: Offline Thanks Meter: 2	try change 47Kom resistor on pcb(resistor stay in power pads)