3230 Camera "Feature Not Supported" - GSM-Forum

metronetGSM · 07-23-2006, 13:17

i have Nokia 3230 say "Features not Support" when Acess Camera. please give me solution....

thanks very much for help..........

mehdi_naghous · 07-23-2006, 13:20

I HAVE A THIS PROBLAM ALSO
A FLASH IT WITH JAF BUT JAF CANT SOLVE MY PROBLAM THIS PROBLAM IS 100% HARDWARE
[email protected]
+989131154402

Rutweiler · 07-23-2006, 17:32

i encountered that also but i fixed it in ufs box and flash it with a higher version

br

hieumobile · 07-24-2006, 04:24

repair chip camera for 3230 &6260 is ok ..goodluck

rihawi · 07-25-2006, 13:41

you mast to ghaneg camera chip ( camera ic ) than you wall sulf thise problem
good luck

agianmaker · 08-19-2006, 03:04

where camera chip
plz post the picture schematic camera chip

BR

jarniel · 08-19-2006, 11:28

try to replace camera itself, if the problem still the same. upp didnt give response to activate camera...maybe it was upp prob..

frnd_4_gsm · 08-19-2006, 12:03

first of all replace the front board from the ok handset its the problem of board

wasifkhan · 08-19-2006, 18:28

problum is in the flex cable b/w two pcb.

pandya · 08-19-2006, 19:54

Quote:

Originally Posted by metronetGSM

i have Nokia 3230 say "Features not Support" when Acess Camera. please give me solution....

thanks very much for help..........

hi,i am himanshu.your 3230 handset problem is front board, change the board and the problem will be solved. my email id is [email protected]

rakker18 · 08-19-2006, 22:19

try remove the camera then fit it back again,, br

ahkhoo76 · 10-15-2006, 12:07

3230 camera "feature not supported" flex problem tested by swap two board,camera work well now.

aftab70 · 10-15-2006, 17:17

problum is in the flex cable soket no 3 re solldring and chk

**.:SARCAR:.** · 10-16-2006, 18:47

Quote:

Originally Posted by metronetGSM

i have Nokia 3230 say "Features not Support" when Acess Camera. please give me solution....

thanks very much for help..........

Hi Friend
check out this
1) check flex cable & jack
2) check camera with new one
in most cases loose between cam & pcb jack
good luck

elkarimi · 03-15-2008, 14:33

i hope this shema help u

07-23-2006, 13:17	#1 (permalink)
metronetGSM Insane Poster Join Date: Jul 2004 Location: Jogja Indo Age: 49 Posts: 81 Member: 75243 Status: Offline Thanks Meter: 6	3230 Camera "Feature Not Supported" i have Nokia 3230 say "Features not Support" when Acess Camera. please give me solution.... thanks very much for help..........

07-25-2006, 13:41	#5 (permalink)
rihawi Major Poster Join Date: Jun 2004 Age: 54 Posts: 45 Member: 67983 Status: Offline Thanks Meter: 0	camera problem you mast to ghaneg camera chip ( camera ic ) than you wall sulf thise problem good luck

10-15-2006, 17:17	#13 (permalink)
aftab70 Freak Poster Join Date: Mar 2005 Location: GsmFather.Com Age: 54 Posts: 284 Member: 124069 Status: Offline Thanks Meter: 59	aftab70 problum is in the flex cable soket no 3 re solldring and chk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
e65 camera "feature not supported"	roy_naber	Nokia Hardware & Hardware Repair	9	01-07-2011 14:11
E65 camera "feature not supported"	meisam	Nokia Hardware & Hardware Repair	6	09-07-2010 11:58
6630 Camera "Feature Not Supported"	nomi	Nokia Hardware & Hardware Repair	4	08-14-2010 08:47
"feature not supported"	green bird	Nokia Hardware & Hardware Repair	29	01-17-2007 11:40
6630 and video: "feature not supported"!!	area51roby	Nokia Base Band 5 ( BB-5 )	4	08-29-2006 20:03

07-23-2006, 13:20	#2 (permalink)
mehdi_naghous No Life Poster Join Date: Jul 2005 Location: iran Posts: 618 Member: 158513 Status: Offline Thanks Meter: 32	I HAVE A THIS PROBLAM ALSO A FLASH IT WITH JAF BUT JAF CANT SOLVE MY PROBLAM THIS PROBLAM IS 100% HARDWARE [email protected] +989131154402

07-23-2006, 17:32	#3 (permalink)
Rutweiler Freak Poster Join Date: Sep 2005 Location: Philippines Age: 45 Posts: 135 Member: 184011 Status: Offline Thanks Meter: 4	i encountered that also but i fixed it in ufs box and flash it with a higher version br

07-24-2006, 04:24	#4 (permalink)
hieumobile Junior Member Join Date: Jul 2006 Posts: 5 Member: 310861 Status: Offline Thanks Meter: 0	repair chip camera for 3230 &6260 is ok ..goodluck

08-19-2006, 03:04	#6 (permalink)
agianmaker Junior Member Join Date: Apr 2006 Posts: 31 Member: 261603 Status: Offline Thanks Meter: 2	where camera chip plz post the picture schematic camera chip BR

08-19-2006, 11:28	#7 (permalink)
jarniel Freak Poster Join Date: May 2005 Location: ksa Age: 52 Posts: 301 Member: 149600 Status: Offline Thanks Meter: 11	try to replace camera itself, if the problem still the same. upp didnt give response to activate camera...maybe it was upp prob..

08-19-2006, 12:03	#8 (permalink)
frnd_4_gsm No Life Poster Join Date: May 2006 Location: ..::INDIA::.. Posts: 632 Member: 279604 Status: Offline Sonork: 100.1582858 Thanks Meter: 198	first of all replace the front board from the ok handset its the problem of board

08-19-2006, 18:28	#9 (permalink)
wasifkhan Freak Poster Join Date: Jul 2004 Location: UAE Age: 40 Posts: 422 Member: 72783 Status: Offline Thanks Meter: 22	problum is in the flex cable b/w two pcb.

08-19-2006, 22:19	#11 (permalink)
rakker18 Junior Member Join Date: Jun 2006 Posts: 31 Member: 286457 Status: Offline Thanks Meter: 1	try remove the camera then fit it back again,, br

10-15-2006, 12:07	#12 (permalink)
ahkhoo76 Insane Poster Join Date: Jul 2003 Posts: 88 Member: 33029 Status: Offline Thanks Meter: 9	3230 camera "feature not supported" flex problem tested by swap two board,camera work well now.

03-15-2008, 14:33	#15 (permalink)
elkarimi Insane Poster Join Date: Nov 2005 Posts: 76 Member: 204013 Status: Offline Thanks Meter: 1	i hope this shema help u