3650 blank display - not soft problem - GSM-Forum

ersa · 03-29-2005, 14:14

My 3650 power on, but after 15s power off. Display is blank.
I can normaly flesh this phone. I've erased all flesh and write new soft and PM, but still the same

Best Regards
ERSA
Sebastian

Yoda_Brno · 03-29-2005, 20:20

Most problems with restarting WD2 phone cames from cold soldered / faulty FLASH IC / IC`s.. Rehot it or change.. But at first rehot SRAM IC.. but i am sure that u have SW problem...U have to be 100% sure coz then is soldering for nothing... it can come only from bad PM file..

Unggul · 03-29-2005, 21:04

try to reflash with BIG flash file (Chinnese) if it can powering up and stand by more than 15 sec, this is 100% soft probl

Regards

BesTCooL · 03-30-2005, 01:38

First I think UEM change (because 15 second off) and again upload FULL..
it no repair After check LCD paths..

mobile star · 04-15-2005, 03:03

flash phone with Chinnese .......full factory ......format user area .....check imei.....
write pm .......... but if imei give(????????????) flash rpl .
then reflash it with normal flash

03-29-2005, 14:14	#1 (permalink)
ersa No Life Poster Join Date: Jul 2004 Location: Now on earth Age: 48 Posts: 896 Member: 75290 Status: Offline Thanks Meter: 57	3650 blank display - not soft problem My 3650 power on, but after 15s power off. Display is blank. I can normaly flesh this phone. I've erased all flesh and write new soft and PM, but still the same Best Regards ERSA Sebastian Last edited by ersa; 03-29-2005 at 15:05.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
n73 problem hung up blank display	maryajne	Nokia Base Band 5 ( BB-5 )	4	01-16-2008 08:20
Nokia 3650 blank display...help wanted.	jedtz	Nokia Hardware & Hardware Repair	2	07-29-2006 05:15
GD95 with Blank IC- Not Software Problem	tanim_1976	Panasonic	0	05-12-2003 18:25
3650 blank display	rahul_raychand	WD2 & APE (Symbian Phones)	1	04-30-2003 15:02
c45 blank display strange problem	thecult	Nokia Hardware & Hardware Repair	2	12-16-2002 14:33

03-29-2005, 20:20	#2 (permalink)
Yoda_Brno Freak Poster Join Date: Sep 2003 Location: Czech Rep. Age: 43 Posts: 348 Member: 40423 Status: Offline Thanks Meter: 5	Most problems with restarting WD2 phone cames from cold soldered / faulty FLASH IC / IC`s.. Rehot it or change.. But at first rehot SRAM IC.. but i am sure that u have SW problem...U have to be 100% sure coz then is soldering for nothing... it can come only from bad PM file..

03-29-2005, 21:04	#3 (permalink)
Unggul No Life Poster Join Date: Jul 2004 Location: Bandung - West Java, Indonesia Age: 43 Posts: 501 Member: 71273 Status: Offline Thanks Meter: 14	try to reflash with BIG flash file (Chinnese) if it can powering up and stand by more than 15 sec, this is 100% soft probl Regards

03-30-2005, 01:38	#4 (permalink)
BesTCooL No Life Poster Join Date: Dec 2002 Location: TURKEY Age: 44 Posts: 3,285 Member: 18442 Status: Offline Sonork: 111110 Thanks Meter: 622	First I think UEM change (because 15 second off) and again upload FULL.. it no repair After check LCD paths..

04-15-2005, 03:03	#5 (permalink)
mobile star Freak Poster Join Date: Feb 2004 Location: jordan Age: 47 Posts: 348 Member: 54916 Status: Offline Thanks Meter: 58	flash phone with Chinnese .......full factory ......format user area .....check imei..... write pm .......... but if imei give(????????????) flash rpl . then reflash it with normal flash