6131 keypad problem! Please help!!!!!! - GSM-Forum

Bloodware · 07-27-2007, 02:03

6131 fall down but everything OK for 1 month. But now its keypad is hang on for an hour using! I've tried to rehot the RAP3G IC and change the Keypad ICs : R2405, R2409, Z2400, but nothing change!
Anybody has another solution? Please help me a.s.a.p.
Thanksssssssssssssss!

YOUSSEF1975 · 09-03-2007, 12:37

I am looking for the same problem, i am going to change the ic keypad to try so i will see. if it doesn't work i am going to try to change the flex (rubbon) and at the end i am going to change the clips on the pcb (board) when you put the flex..........

It is possible that your ics doesn't work.

Thanks

YOUSSEF1975 · 09-03-2007, 13:17

I just change the ics but nothing.

YOUSSEF1975 · 09-03-2007, 14:28

Now it's ok, i replace one time again the ics andit works very good.

Hi

Bloodware · 10-01-2007, 06:50

Thanks
Anybody have another solution? Please help! Very need!

meo786pk · 10-01-2007, 07:12

Dear,

try it.

Muhammad Afzal Meo

Quote:

Originally Posted by Bloodware

Thanks
Anybody have another solution? Please help! Very need!

mansoor5 · 07-09-2011, 10:09

hai brother i have 6131 same keyes are not working wich one is a key pad ic pls help

07-27-2007, 02:03	#1 (permalink)
Bloodware Major Poster Join Date: Dec 2004 Location: Nearby all of you Age: 47 Posts: 41 Member: 101821 Status: Offline Thanks Meter: 5	6131 keypad problem! Please help!!!!!! 6131 fall down but everything OK for 1 month. But now its keypad is hang on for an hour using! I've tried to rehot the RAP3G IC and change the Keypad ICs : R2405, R2409, Z2400, but nothing change! Anybody has another solution? Please help me a.s.a.p. Thanksssssssssssssss!

09-03-2007, 14:28	#4 (permalink)
YOUSSEF1975 Registered User Join Date: Oct 2006 Age: 48 Posts: 348 Member: 362673 Status: Offline Thanks Meter: 37	6131 keypad solution Now it's ok, i replace one time again the ics andit works very good. Hi

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
""Nokia 2600c keypad problem - please help me""	rajeevpchandran	Nokia Hardware & Hardware Repair	11	04-15-2009 20:28
6131 unlock problem please help !!	feritk	MT-BOX	4	08-06-2007 20:38
LG G8000 Number Keypad Problem. Please help me!	trinhngoctrung	LG	0	10-07-2006 02:23
Motorola V3 keypad problems, please help.	yfgreene	Motorola P2k	0	01-11-2005 19:05
m55 keypad problem.---please help	Sigma	E-Gold Based Phones	1	08-13-2004 00:07

09-03-2007, 12:37	#2 (permalink)
YOUSSEF1975 Registered User Join Date: Oct 2006 Age: 48 Posts: 348 Member: 362673 Status: Offline Thanks Meter: 37	I am looking for the same problem, i am going to change the ic keypad to try so i will see. if it doesn't work i am going to try to change the flex (rubbon) and at the end i am going to change the clips on the pcb (board) when you put the flex.......... It is possible that your ics doesn't work. Thanks

09-03-2007, 13:17	#3 (permalink)
YOUSSEF1975 Registered User Join Date: Oct 2006 Age: 48 Posts: 348 Member: 362673 Status: Offline Thanks Meter: 37	I just change the ics but nothing.

10-01-2007, 06:50	#5 (permalink)
Bloodware Major Poster Join Date: Dec 2004 Location: Nearby all of you Age: 47 Posts: 41 Member: 101821 Status: Offline Thanks Meter: 5	Thanks Anybody have another solution? Please help! Very need!

07-09-2011, 10:09	#7 (permalink)
mansoor5 Junior Member Join Date: Jan 2011 Posts: 6 Member: 1502824 Status: Offline Sonork: 63000 Thanks Meter: 0	hai brother i have 6131 same keyes are not working wich one is a key pad ic pls help