6280 black lcd

[tomaik]

hi to all members! nokia 6280 after waterdamage after pcb ultrasonic cleaner after upgrade the lcd is black.the keypad works fine and the lcd has been replaced with new one! any solution? thanks inb advance.

[abdulrahman]

Originally Posted by tomaik

hi to all members! nokia 6280 after waterdamage after pcb ultrasonic cleaner after upgrade the lcd is black.the keypad works fine and the lcd has been replaced with new one! any solution? thanks inb advance.

Dear friend,

1) Flash it with latest verison
2) check Flat cable if necessary change it
3) check flat cable connector on PCB check all voltages and if necessary resolder carefully..
4)check display ic reflow it or change it with new original one..

regards
abdulrahman

[nishaon]

Originally Posted by abdulrahman

Dear friend,

1) Flash it with latest verison
2) check Flat cable if necessary change it
3) check flat cable connector on PCB check all voltages and if necessary resolder carefully..
4)check display ic reflow it or change it with new original one..

regards
abdulrahman

Thanks for your reply. Can u please confirm that is the display IC of 6280 same to the 6600 or 7610? And also is display IC and keypad IC same?


Best regards

[email protected]

[neliocoelho]

if lcd and flex cable are good try this

[gs cell]

change flex cable brother