..::7610 give this error::.. - GSM-Forum

HUM · 11-08-2007, 00:41

nokia 7610 when customer bring this set to me,it gives 1st boot ok,but on flashing only stops on 1st boot ok,i change ram but still give this error.

1st Boot Ok, WD2, UPP: 1081
2nd Boot Error: 6
Platform: 6, Error Data:
F3 72 72 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Process Failed, Repowering Mobile

will this fault is from boot ic or not?

..::HUM::..

HUM · 11-08-2007, 01:55

or its from smps ic?

..::HUM::..

gpong · 11-08-2007, 04:50

cable ,ram,upp,test it first,but with carefull

/ARIF/ · 11-08-2007, 04:54

it is cpu problem reheat this or change

unnis · 11-08-2007, 05:32

pls chek ram first,there is always the problem due to ram in 7610

xtremeburaq · 11-08-2007, 06:31

THIS ERROR COMES DUE TO SEVERAL COMPONENTS BUT FIRST U HAVE TO CHANGE RAM IC.BECAUSE IT IS IST CULPRIT.AND THE OTHERS R FLASH IC,UPP.

11-08-2007, 00:41	#1 (permalink)
HUM No Life Poster Join Date: Jul 2005 Location: karachi Posts: 8,673 Member: 161728 Status: Offline Sonork: 100.1582708 Thanks Meter: 2,237	..::7610 give this error::.. nokia 7610 when customer bring this set to me,it gives 1st boot ok,but on flashing only stops on 1st boot ok,i change ram but still give this error. 1st Boot Ok, WD2, UPP: 1081 2nd Boot Error: 6 Platform: 6, Error Data: F3 72 72 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Process Failed, Repowering Mobile will this fault is from boot ic or not? ..::HUM::..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
..::6120c give this error::..	HUM	Nokia Hardware & Hardware Repair	27	01-27-2011 06:45
..::n82 give this error::..	HUM	Chinese Models & Cloned Phones	3	05-30-2009 06:33
..::n82 give this error::..	HUM	Chinese Models & Cloned Phones	0	05-29-2009 20:52
..::ufs3 give this error::..	HUM	UFS2 + UFS3-Tornadoflasher	7	10-22-2008 19:36

11-08-2007, 01:55	#2 (permalink)
HUM No Life Poster Join Date: Jul 2005 Location: karachi Posts: 8,673 Member: 161728 Status: Offline Sonork: 100.1582708 Thanks Meter: 2,237	or its from smps ic? ..::HUM::..

11-08-2007, 04:50	#3 (permalink)
gpong No Life Poster Join Date: Jun 2006 Posts: 646 Member: 296067 Status: Offline Thanks Meter: 50	cable ,ram,upp,test it first,but with carefull

11-08-2007, 04:54	#4 (permalink)
/ARIF/ Temporary banned !! Join Date: Jul 2007 Location: Toketek Age: 44 Posts: 780 Member: 546766 Status: Offline Thanks Meter: 51	it is cpu problem reheat this or change

11-08-2007, 05:32	#5 (permalink)
unnis Junior Member Join Date: Jan 2007 Location: india Posts: 22 Member: 422945 Status: Offline Thanks Meter: 3	pls chek ram first,there is always the problem due to ram in 7610

11-08-2007, 06:31	#6 (permalink)
xtremeburaq Registered User Join Date: Apr 2007 Posts: 509 Member: 483748 Status: Offline Thanks Meter: 47	THIS ERROR COMES DUE TO SEVERAL COMPONENTS BUT FIRST U HAVE TO CHANGE RAM IC.BECAUSE IT IS IST CULPRIT.AND THE OTHERS R FLASH IC,UPP.