CLOCK TIME PROBLEM - STRANGE @willy(?) - GSM-Forum

platy · 02-23-2003, 17:00

Hello,
i have a problem with one 8210 - it always need to set time after switching off(not need to remove battery). I found out that
connector of clock-battery is shorted to GND! Can anyone tell me
where it can be shorted? It is not ccont or chaps problem and
phone is not water damaged...
thanx a lot
Platy

willy · 02-23-2003, 20:02

HI
it is connect to CHAPS pin F5
and CCONT E5
and C116
and R110

Willy

platy · 02-24-2003, 17:26

Thanx a lot!
problem solved - C116 was shorted.

Regards
Platy

Burnt Cobba · 06-20-2003, 23:13

@ willy

have an exact problem witha 5210 as regards the time. Also RF is not always full and sometimes it goes to nothing then suddenly it goes up. When it goes up i can make call, lights of back screen flicker a bit like as if the power is not being enough.

I already tried to change B100 but no change.

What else can be? I tried to searh around B100 for any shorts but there seems to be nothing.

Unluckily have only 5210 level 1 service manual.

thanks for any help mate
al

02-23-2003, 17:00	#1 (permalink)
platy Freak Poster Join Date: Mar 2001 Location: Czech Republic Posts: 295 Member: 3714 Status: Offline Thanks Meter: 6	CLOCK TIME PROBLEM - STRANGE @willy(?) Hello, i have a problem with one 8210 - it always need to set time after switching off(not need to remove battery). I found out that connector of clock-battery is shorted to GND! Can anyone tell me where it can be shorted? It is not ccont or chaps problem and phone is not water damaged... thanx a lot Platy

02-23-2003, 20:02	#2 (permalink)
willy No Life Poster Join Date: Mar 2000 Location: inside NOKIA phone Age: 58 Posts: 1,677 Member: 1060 Status: Offline Thanks Meter: 10	HI it is connect to CHAPS pin F5 and CCONT E5 and C116 and R110 Willy

02-24-2003, 17:26	#3 (permalink)
platy Freak Poster Join Date: Mar 2001 Location: Czech Republic Posts: 295 Member: 3714 Status: Offline Thanks Meter: 6	Thanx a lot! problem solved - C116 was shorted. Regards Platy

06-20-2003, 23:13	#4 (permalink)
Burnt Cobba No Life Poster Join Date: Apr 2002 Location: The Green Mile Posts: 3,653 Member: 11325 Status: Offline Thanks Meter: 266	@ willy have an exact problem witha 5210 as regards the time. Also RF is not always full and sometimes it goes to nothing then suddenly it goes up. When it goes up i can make call, lights of back screen flicker a bit like as if the power is not being enough. I already tried to change B100 but no change. What else can be? I tried to searh around B100 for any shorts but there seems to be nothing. Unluckily have only 5210 level 1 service manual. thanks for any help mate al