n3310 displey problem - GSM-Forum

fiZ · 07-08-2002, 18:03

displey works that no contrast,displey is ok,kontakts are ok,help.

fiZ · 07-08-2002, 20:41

pin 1 of lcd on board is 0 V,must be 2,8 v

gsm_boy · 07-09-2002, 00:22

Quote:

Originally posted by fiZ
pin 1 of lcd on board is 0 V,must be 2,8 v

Hello

Then make it to 2.8 V by doing jumper

Good Luck

fiZ · 07-09-2002, 13:05

with than I will connect?

07-08-2002, 18:03	#1 (permalink)
fiZ Registered User Join Date: Feb 2002 Location: nokia Age: 48 Posts: 204 Member: 9626 Status: Offline Thanks Meter: 0	n3310 displey problem displey works that no contrast,displey is ok,kontakts are ok,help.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
n3310 signal problem	pali	Nokia Hardware & Hardware Repair	4	09-18-2006 14:14
A55 displey problem	gosev	Siemens Hardware Repair Area	9	01-14-2005 18:11
6210 problem on Displey	vml	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	03-22-2004 22:02
Alcatel bf3 displey problem	gosev	Alcatel TCL Hardware Repair	2	08-23-2003 12:25
N3310 display problem	pali	Nokia Hardware & Hardware Repair	28	07-30-2002 12:16

07-08-2002, 20:41	#2 (permalink)
fiZ Registered User Join Date: Feb 2002 Location: nokia Age: 48 Posts: 204 Member: 9626 Status: Offline Thanks Meter: 0	pin 1 of lcd on board is 0 V,must be 2,8 v

07-09-2002, 13:05	#4 (permalink)
fiZ Registered User Join Date: Feb 2002 Location: nokia Age: 48 Posts: 204 Member: 9626 Status: Offline Thanks Meter: 0	with than I will connect?