nokia 6610i lcd problem:( - GSM-Forum

OncleOh · 07-15-2005, 00:17

Hi,
i have one 6610i with the folowing problem, when i power it on the display shows nothing, i tested the display in another phone and is working ok. Eaven tested the LDC connector way's and they are ok, now i ren out of ideas.
Any suggestions?

Regards!
Leo

p.s. Have same problem wiht a 3100 and 3200...

07heaven · 07-15-2005, 00:41

Might be software versions, maybe upgrading or downgrading may solve the problem depending on age of screen, new ones are improved, and need new software versions

Normunds · 07-15-2005, 22:10

Yes, upload new software. Its work for 6610, 6610i, 3200, but not allways for 3100...

OncleOh · 07-16-2005, 01:04

Hi,
thanks for your reply's. And if the sw upgrade does not work, what then?

Regards!
Leo

rybol · 07-19-2005, 20:32

if the LDC connector way's are ok try change R308, R309, UPP but 2 days ago I had problem with lcd in 6610 and I changed HELGO

Max_B · 07-19-2005, 20:46

Quote:

Originally Posted by rybol

if the LDC connector way's are ok try change R308, R309, UPP but 2 days ago I had problem with lcd in 6610 and I changed HELGO

If I'm not wrong Helgo is just RF processor
How this would fix smth in display function ?

Max_B

fonzek · 07-19-2005, 20:51

just reflash it with new flash file, that is always problem with this phone.Displays are same but different. Just reflesh phone with new flash and it will works fine

BesTCooL · 07-19-2005, 20:57

exchanege LCD from other phone

rybol · 07-19-2005, 23:32

Quote:

Originally Posted by Max_B

If I'm not wrong Helgo is just RF processor
How this would fix smth in display function ?

Max_B

I know but I have this problem... phone power on and show 3/4 of screen(this same in normal mode - some times only blink) under the box in local or test mode all lcd was working (but I couldn't do reset) ... i changed UPP, UEM... then I changed helgo (there were some connected pads)... now all it's ok.. In my problem HELGO (or balls) was damaged

OncleOh · 07-20-2005, 01:10

Hi,
i treid to flash with higher version, no result. Checked the connector and is ok. Changed the lcd, still the same result.
So any other ide?

Regards!
Leo

07-15-2005, 00:17	#1 (permalink)
OncleOh Freak Poster Join Date: Feb 2001 Location: Idrija Posts: 280 Member: 3496 Status: Offline Thanks Meter: 8	nokia 6610i lcd problem:( Hi, i have one 6610i with the folowing problem, when i power it on the display shows nothing, i tested the display in another phone and is working ok. Eaven tested the LDC connector way's and they are ok, now i ren out of ideas. Any suggestions? Regards! Leo p.s. Have same problem wiht a 3100 and 3200...

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
6610i lcd light is on continuosly	hany elsaghir f	Nokia Hardware & Hardware Repair	2	05-29-2007 11:04
for sale, 6610i lcds	MSG	Sell ur Old and Used Stuff	3	02-26-2006 01:03
6610i lcd connector	kreten	Nokia Digital Core Technology 4 ( DCT-4 )	0	01-24-2005 16:21
NOKIA 6610i with 3G sim	den1s	Nokia Digital Core Technology 4 ( DCT-4 )	0	07-30-2003 12:45

07-15-2005, 00:41	#2 (permalink)
07heaven No Life Poster Join Date: Mar 2004 Location: Midlands, UK Posts: 782 Member: 57937 Status: Offline Thanks Meter: 34	Might be software versions, maybe upgrading or downgrading may solve the problem depending on age of screen, new ones are improved, and need new software versions

07-15-2005, 22:10	#3 (permalink)
Normunds Freak Poster Join Date: Aug 2004 Location: FF 4B 02 Posts: 254 Member: 77618 Status: Offline Thanks Meter: 6	Yes, upload new software. Its work for 6610, 6610i, 3200, but not allways for 3100...

07-16-2005, 01:04	#4 (permalink)
OncleOh Freak Poster Join Date: Feb 2001 Location: Idrija Posts: 280 Member: 3496 Status: Offline Thanks Meter: 8	Hi, thanks for your reply's. And if the sw upgrade does not work, what then? Regards! Leo

07-19-2005, 20:32	#5 (permalink)
rybol Junior Member Join Date: Feb 2004 Age: 40 Posts: 27 Member: 53203 Status: Offline Thanks Meter: 1	if the LDC connector way's are ok try change R308, R309, UPP but 2 days ago I had problem with lcd in 6610 and I changed HELGO

07-19-2005, 20:51	#7 (permalink)
fonzek Freak Poster Join Date: Jul 2005 Age: 45 Posts: 105 Member: 162268 Status: Offline Thanks Meter: 0	just reflash it with new flash file, that is always problem with this phone.Displays are same but different. Just reflesh phone with new flash and it will works fine

07-19-2005, 20:57	#8 (permalink)
BesTCooL No Life Poster Join Date: Dec 2002 Location: TURKEY Age: 44 Posts: 3,285 Member: 18442 Status: Offline Sonork: 111110 Thanks Meter: 622	exchanege LCD from other phone

07-20-2005, 01:10	#10 (permalink)
OncleOh Freak Poster Join Date: Feb 2001 Location: Idrija Posts: 280 Member: 3496 Status: Offline Thanks Meter: 8	Hi, i treid to flash with higher version, no result. Checked the connector and is ok. Changed the lcd, still the same result. So any other ide? Regards! Leo