3310 light problem! - GSM-Forum

vegeta · 10-13-2003, 03:19

i got a 3310 it was dropped in a bath full of water, so it was left to dry about 2 dayz later i tried to switch it on the 3310 woudnt turn so i though i would try to flash the fone so i gave it a full flash and it switched on but now the problem is that lightz on the wont turn off it i switch the fone off they jus go dim basically they are on all the time is there n e solution for this???

hakima · 10-13-2003, 15:03

Change Backlight Controller IC!!!!!!!!!

vegeta · 10-13-2003, 16:35

how do i go about doin that?

oviliv · 10-13-2003, 17:27

try to connect a wire between pins 7 and 15 on the light controller.if not change ic for light.
Good luck!!!

Medz · 10-13-2003, 18:48

I realised that U didn't tryes to clean it , so U hve to do with a
proper cleaning spray, then dry it by a hair dryer.If U finde some
lights not working " That means that the capsten wich careys
tracking between the anterior and posterior faces of the board
is not cnnecting" , so U have to bridge it. Good Luck.

vegeta · 10-14-2003, 11:46

ok thanx for the replies but does n e one hav a diagram of what i hav to bridge?

Springer · 10-14-2003, 12:42

Vegata!
Just remove r406 and r407!
Try it, must help for you.

B.R.

vegeta · 10-14-2003, 12:49

ok will try it now

10-13-2003, 03:19	#1 (permalink)
vegeta Freak Poster Join Date: Jun 2001 Location: Huddersfield, UK Posts: 275 Member: 4850 Status: Offline Thanks Meter: 3	3310 light problem! i got a 3310 it was dropped in a bath full of water, so it was left to dry about 2 dayz later i tried to switch it on the 3310 woudnt turn so i though i would try to flash the fone so i gave it a full flash and it switched on but now the problem is that lightz on the wont turn off it i switch the fone off they jus go dim basically they are on all the time is there n e solution for this???

10-13-2003, 17:27	#4 (permalink)
oviliv Junior Member Join Date: Oct 2003 Location: Romania Age: 42 Posts: 36 Member: 41238 Status: Offline Thanks Meter: 0	3310 try to connect a wire between pins 7 and 15 on the light controller.if not change ic for light. Good luck!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3310 light problem	waleed2500	Nokia Hardware & Hardware Repair	1	12-19-2005 18:50
3310 with light problems!!!	sergioems	Nokia Hardware & Hardware Repair	16	08-09-2004 10:17
3310 2 problems light and signal	Destructor	Nokia Hardware & Hardware Repair	0	09-12-2003 12:16
3310 lights problem.	OncleOh	Nokia Hardware & Hardware Repair	8	02-18-2003 15:59
3310 Lights On But Not Working	Black-Axe	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	07-06-2002 09:46

10-13-2003, 15:03	#2 (permalink)
hakima No Life Poster Join Date: Jul 2003 Posts: 2,895 Member: 33804 Status: Offline Thanks Meter: 22	Change Backlight Controller IC!!!!!!!!!

10-13-2003, 16:35	#3 (permalink)
vegeta Freak Poster Join Date: Jun 2001 Location: Huddersfield, UK Posts: 275 Member: 4850 Status: Offline Thanks Meter: 3	how do i go about doin that?

10-13-2003, 18:48	#5 (permalink)
Medz No Life Poster Join Date: Sep 2003 Age: 66 Posts: 807 Member: 39601 Status: Offline Thanks Meter: 13	I realised that U didn't tryes to clean it , so U hve to do with a proper cleaning spray, then dry it by a hair dryer.If U finde some lights not working " That means that the capsten wich careys tracking between the anterior and posterior faces of the board is not cnnecting" , so U have to bridge it. Good Luck.

10-14-2003, 11:46	#6 (permalink)
vegeta Freak Poster Join Date: Jun 2001 Location: Huddersfield, UK Posts: 275 Member: 4850 Status: Offline Thanks Meter: 3	ok thanx for the replies but does n e one hav a diagram of what i hav to bridge?

10-14-2003, 12:42	#7 (permalink)
Springer Freak Poster Join Date: Sep 2002 Location: Nokialand Age: 43 Posts: 147 Member: 15909 Status: Offline Thanks Meter: 0	Vegata! Just remove r406 and r407! Try it, must help for you. B.R.

10-14-2003, 12:49	#8 (permalink)
vegeta Freak Poster Join Date: Jun 2001 Location: Huddersfield, UK Posts: 275 Member: 4850 Status: Offline Thanks Meter: 3	ok will try it now