9210 Pda Failure - GSM-Forum

supremegsm · 11-19-2004, 12:38

Hi

I Have 2 pcs 9210 handsets. The GSM Phone is working fine, but the Pda fails to turn on. I have flashed both the phones,changed flex cable, change internal LCD, but nothing seems to work. Somebody please suggest what should be done.

BR

supremegsm · 11-21-2004, 12:48

Do we have any experts to reply on this here....

bestman · 11-21-2004, 16:36

check your placement again.

bestman.

CyberoptiK · 11-21-2004, 17:32

Controll your connectors, If ok, resold MADLINDA, Flash ICs if not glued.

GreetZ

Yoda_Brno · 11-21-2004, 18:27

Quote:

Originally Posted by supremegsm

Hi

I Have 2 pcs 9210 handsets. The GSM Phone is working fine, but the Pda fails to turn on. I have flashed both the phones,changed flex cable, change internal LCD, but nothing seems to work. Somebody please suggest what should be done.

BR

Is It restarting or wont start at all??? If resatrting try Format Device. Fullflash made on which flasher? MAke FFS+FAID, check IMEI if is correct. When no succes reflow flash IC`s + RAM IC.

supremegsm · 11-23-2004, 19:05

Thank you all guys for the reply.

Will post you the results .

BR

gabrielgsm · 01-18-2005, 00:51

I have the same problem with my 9210i rae-5
The phone working fine...
I flash mcu and ppm and still the same..PDA does`n start and can`t format !
only white screen...
I change the whole module from another 9210i and the display is working fine...

I also reflow MADLINDA....no succes..!!!
Any ideas??

Quote:

Originally Posted by supremegsm

Hi

I Have 2 pcs 9210 handsets. The GSM Phone is working fine, but the Pda fails to turn on. I have flashed both the phones,changed flex cable, change internal LCD, but nothing seems to work. Somebody please suggest what should be done.

BR

11-19-2004, 12:38	#1 (permalink)
supremegsm Freak Poster Join Date: Apr 2003 Age: 47 Posts: 340 Member: 25763 Status: Offline Thanks Meter: 18	9210 Pda Failure Hi I Have 2 pcs 9210 handsets. The GSM Phone is working fine, but the Pda fails to turn on. I have flashed both the phones,changed flex cable, change internal LCD, but nothing seems to work. Somebody please suggest what should be done. BR

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
9210 - PDA part dead after flash, please help	whiffin	UFS2 + UFS3-Tornadoflasher	2	01-10-2007 14:53
9210 PDA baclight problem	qwerthj	Nokia Hardware & Hardware Repair	1	05-31-2004 01:06
Nokia 9210 pda lcds	Hanukkah	Main Sales Section	0	05-17-2004 16:28
Need flashing and PDA repairing solution for 9210!	Morris	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-13-2003 05:13
nokia 9210 PDA freezing	sivaprasad	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	02-15-2003 05:32

11-21-2004, 12:48	#2 (permalink)
supremegsm Freak Poster Join Date: Apr 2003 Age: 47 Posts: 340 Member: 25763 Status: Offline Thanks Meter: 18	Do we have any experts to reply on this here....

11-21-2004, 16:36	#3 (permalink)
bestman No Life Poster Join Date: Apr 2004 Age: 49 Posts: 1,271 Member: 61294 Status: Offline Thanks Meter: 49	check your placement again. bestman.

11-21-2004, 17:32	#4 (permalink)
CyberoptiK No Life Poster Join Date: Sep 2003 Location: GermanY Posts: 972 Member: 38922 Status: Offline Thanks Meter: 35	Controll your connectors, If ok, resold MADLINDA, Flash ICs if not glued. GreetZ

11-23-2004, 19:05	#6 (permalink)
supremegsm Freak Poster Join Date: Apr 2003 Age: 47 Posts: 340 Member: 25763 Status: Offline Thanks Meter: 18	Thank you all guys for the reply. Will post you the results . BR