K1 Dead after unlocking with magic testpoint - GSM-Forum

Kais_Unlocker · 04-06-2007, 11:24

Helle everybody,

I received a magic testpoint for motorola K1, but when I wanted to unlock the phone with smartclip+s-card everything was fine, but during 'Unlocking Phone' it stopped, and sayed somethiing like:"Communication failed with clip", after that when I put the battery inside the keypadlight goes on and off, and the phone doesn't go on anymore and also no connection with smart moto.
Does somebody know what to do, do I have to make a Testpoint?
Does anybody have a picture of the testpoint?

Thank You!

sihnam · 04-06-2007, 11:51

Quote:

Originally Posted by Kais_Unlocker

Helle everybody,

I received a magic testpoint for motorola K1, but when I wanted to unlock the phone with smartclip+s-card everything was fine, but during 'Unlocking Phone' it stopped, and sayed somethiing like:"Communication failed with clip", after that when I put the battery inside the keypadlight goes on and off, and the phone doesn't go on anymore and also no connection with smart moto.
Does somebody know what to do, do I have to make a Testpoint?
Does anybody have a picture of the testpoint?

Thank You!

that is a smart clip fail, make testpoint and flash it with a full flash that match the original bootloader and firmware

mcandre · 04-06-2007, 11:51

You have to use it very accurately, because it can damage your phone's power supply controller while unlocking.

mcandre · 04-06-2007, 12:03

Magic TestPoint is developed by UBL team.
Next time please read the manual сlosely before using it!

sihnam · 04-06-2007, 12:15

Quote:

Originally Posted by mcandre

Magic TestPoint is developed by UBL team.
Next time please read the manual сlosely before using it!

magit tp is a universal testpoint that works with any box

ricson · 04-06-2007, 12:46

magic tp will work with any motorolla gadgets in the market

sometimes communication with clip failed happens when another program is running in the background

MDK23 · 04-06-2007, 13:23

for me i see this magic tp are not warranty in the work
i prefer use tp manualy

Kais_Unlocker · 04-06-2007, 22:27

Damned,the K1 does have a difficult testpoint, that`s why I ordered a magic testpoint.....Thank You guys!

jepetu · 04-07-2007, 11:10

Quote:

Originally Posted by Kais_Unlocker

Damned,the K1 does have a difficult testpoint, that`s why I ordered a magic testpoint.....Thank You guys!

Did you know about the Easy TP for K1? Here is the picture!.

BR,

mbcommunication · 04-07-2007, 15:02

clip communications failed is a error in smart-clip and and nothing to do with the TP type used i have only ever recieved this in 2 cases if the phone battery was not charged enough before unlock and drops to low for the phone to communicate with the clip during the process or in nearly case it has been when i am running the clip with battery power or a under powered mains supply 12v 750ma or better 1000ma seems almost essential to unlock safely most phones i get these days

BCcommunication · 04-07-2007, 15:13

bady smart clip work perfectly without sccard
when scard update smart clip creating some problum and mostly clip commnication error

pali · 04-30-2007, 20:18

Quote:

Originally Posted by jepetu

Did you know about the Easy TP for K1? Here is the picture!.

BR,

i've tested your picture and it is not working for me ...
i cant enter blank mode with this MAGIC TP ...

enrocas · 05-02-2007, 03:09

I have used Magic TP many times and never had a problem.....maybe SC problem

keaelite · 05-02-2007, 04:22

Quote:

Originally Posted by Kais_Unlocker

Helle everybody,

I received a magic testpoint for motorola K1, but when I wanted to unlock the phone with smartclip+s-card everything was fine, but during 'Unlocking Phone' it stopped, and sayed somethiing like:"Communication failed with clip", after that when I put the battery inside the keypadlight goes on and off, and the phone doesn't go on anymore and also no connection with smart moto.
Does somebody know what to do, do I have to make a Testpoint?
Does anybody have a picture of the testpoint?

Thank You!

you unlock your phone with insufficient power supply,battery not full charge

MGT SOFTWARE · 05-02-2007, 09:16

the problem of this Man it happen to me, this clkip communication error do occur when low voltage of smart cli you have to set the power adaptor to 12 volt then do test point again manually , the magic test point of UBL is very good because it have enough power do make good connection of the teminal when process start disconnect imediaelly after sho bootloader 030

04-06-2007, 11:24	#1 (permalink)
Kais_Unlocker Insane Poster Join Date: Jan 2006 Location: The Netherlands Age: 36 Posts: 88 Member: 217344 Status: Offline Thanks Meter: 11	K1 Dead after unlocking with magic testpoint Helle everybody, I received a magic testpoint for motorola K1, but when I wanted to unlock the phone with smartclip+s-card everything was fine, but during 'Unlocking Phone' it stopped, and sayed somethiing like:"Communication failed with clip", after that when I put the battery inside the keypadlight goes on and off, and the phone doesn't go on anymore and also no connection with smart moto. Does somebody know what to do, do I have to make a Testpoint? Does anybody have a picture of the testpoint? Thank You!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
K1 Dead after unlock with Smart-clip	.::MoBiLeDoC::.	Smart-Clip	65	09-22-2007 10:37
k1 dead after unlock	filipas	Ultima Box Light	12	09-02-2007 14:31
K1 dead, after tp with Got_Moto	darkacido	Motorola Hardware Repair	0	03-02-2007 06:11
BEWARE! G_08.B7.AER motorolas DEAD after unlock with NO TESTPOINT method!	booreck	Smart-Clip	1	12-19-2006 19:40
v220 dead after unlock with testpoint	fethi	Smart-Clip	7	02-20-2006 19:14

04-06-2007, 11:51	#3 (permalink)
mcandre No Life Poster Join Date: Mar 2006 Location: Central Europe Age: 39 Posts: 11,877 Member: 239548 Status: Offline Thanks Meter: 2,781	You have to use it very accurately, because it can damage your phone's power supply controller while unlocking.

04-06-2007, 12:03	#4 (permalink)
mcandre No Life Poster Join Date: Mar 2006 Location: Central Europe Age: 39 Posts: 11,877 Member: 239548 Status: Offline Thanks Meter: 2,781	Magic TestPoint is developed by UBL team. Next time please read the manual сlosely before using it!

04-06-2007, 12:46	#6 (permalink)
ricson Banned Join Date: Dec 2002 Location: SWITZERLAND Age: 55 Posts: 1,561 Member: 18329 Status: Offline Thanks Meter: 144	magic tp will work with any motorolla gadgets in the market sometimes communication with clip failed happens when another program is running in the background

04-06-2007, 13:23	#7 (permalink)
MDK23 No Life Poster Join Date: Mar 2007 Location: ALGERIA Age: 17 Posts: 3,165 Member: 467636 Status: Offline Sonork: Double Kanon Thanks Meter: 2,654	for me i see this magic tp are not warranty in the work i prefer use tp manualy

04-06-2007, 22:27	#8 (permalink)
Kais_Unlocker Insane Poster Join Date: Jan 2006 Location: The Netherlands Age: 36 Posts: 88 Member: 217344 Status: Offline Thanks Meter: 11	Damned,the K1 does have a difficult testpoint, that`s why I ordered a magic testpoint.....Thank You guys!

04-07-2007, 15:02	#10 (permalink)
mbcommunication No Life Poster Join Date: Feb 2005 Location: Murcia,Spain Age: 45 Posts: 1,468 Member: 116918 Status: Offline Sonork: 100.1590386 Thanks Meter: 559	clip communications failed is a error in smart-clip and and nothing to do with the TP type used i have only ever recieved this in 2 cases if the phone battery was not charged enough before unlock and drops to low for the phone to communicate with the clip during the process or in nearly case it has been when i am running the clip with battery power or a under powered mains supply 12v 750ma or better 1000ma seems almost essential to unlock safely most phones i get these days

04-07-2007, 15:13	#11 (permalink)
BCcommunication No Life Poster Join Date: Aug 2004 Location: Pakistan < Karachi Age: 41 Posts: 1,000 Member: 76456 Status: Offline Sonork: 100.1678368 Thanks Meter: 60	bady smart clip work perfectly without sccard when scard update smart clip creating some problum and mostly clip commnication error

05-02-2007, 03:09	#13 (permalink)
enrocas No Life Poster Join Date: May 2004 Location: Peru Age: 54 Posts: 658 Member: 67240 Status: Offline Thanks Meter: 45	I have used Magic TP many times and never had a problem.....maybe SC problem

05-02-2007, 09:16	#15 (permalink)
MGT SOFTWARE No Life Poster Join Date: Feb 2004 Location: Dar es Salaam TANZANIA Posts: 2,221 Member: 53263 Status: Offline Sonork: gsm master Thanks Meter: 326	the problem of this Man it happen to me, this clkip communication error do occur when low voltage of smart cli you have to set the power adaptor to 12 volt then do test point again manually , the magic test point of UBL is very good because it have enough power do make good connection of the teminal when process start disconnect imediaelly after sho bootloader 030