l6 dead after unlock with smart moto 'testpoint' - GSM-Forum

dexter2 · 07-20-2006, 23:44

HI
strange problem here, i have done this phone over a dozen time same way way using smart moto via testpoint, but this one is just strange. It said 'phone unlocked' but refuses to power up, then i tried to search for phone and i see phone is in flash mode (which is strange, since i removed testpoint). Then i downloaded 'super flash' (pc flash .SHX) and uploaded to phone, i got 'error writting flash' but phone came up and worked for a while, i even used a SIM and all went on fine, but after i powered off phone and tried to power on about an hour later, it just didnt come on, so i repeated procedure tiwice and it came on and off again.

Now i tried full SMF flash and still phone remained dead, i repeated former prcedure and no +ve result, not even earllier results, now phone remains in PARMANENT FLASH MODE.
P.S. Battery fully charged.

S.O.S PLSSSS.

dexter2 · 07-24-2006, 23:53

hmmm....... four days and nobody got an answer for this one! still waiting though.

[Rod] · 07-25-2006, 05:26

phone blinks when u try to turn on?

dest · 07-25-2006, 05:50

does it say
s blank neptune
or
s flash neptune
?

dexter2 · 07-28-2006, 12:28

Phone doesnt blink, and when i try 'search' o smart moto, i get 's blank neptune,..'
'switching to flash mode.......ok'. Even without testpoint now. and remains dead.
Now when i try to flash with SMF flash, it says 'incomplete chip identification.......'

ndagi · 07-28-2006, 13:22

Quote:

Originally Posted by dexter2

Phone doesnt blink, and when i try 'search' o smart moto, i get 's blank neptune,..'
'switching to flash mode.......ok'. Even without testpoint now. and remains dead.
Now when i try to flash with SMF flash, it says 'incomplete chip identification.......'

Sup bro!

USE DESKTOP TO CHARGE BATTERY FULLY MAN OR KA BANU!
1. reconnect test point
2. try to force phone into boot mode using * + # + power on
3. search in smartmoto u should find s-blank neptune
4. disconnect tp
5. in repair tab click repair pds (nb if it fails here u need to start over)
6. please download relash file from boot loader support and flash phone!
7. smile you're in haven

good luck man
ndagi

dest · 07-28-2006, 17:17

cannot be done.

S blank because that you need to check tp becuase it my still be connected...or that the flash chip is damaged. Try hot air on it and do repair pds to see if that works!

kidchaos · 07-28-2006, 17:44

If that won't help... than You have great possibility that the chip is damaged... Do unlock jobs one more time with extremly care!

market_3b2002 · 07-29-2006, 10:48

Try to flash it with RSD light 2.7 or 2.8 with the shx flash files
more easy and quick then smart clip and your phone be a life again

All the bests

dexter2 · 07-31-2006, 11:33

thanx guyz for reply, but customer left with dead phone, wasnt patient enough.

07-20-2006, 23:44	#1 (permalink)
dexter2 Freak Poster Join Date: Sep 2003 Location: nigeria Age: 46 Posts: 187 Member: 38959 Status: Offline Thanks Meter: 0	l6 dead after unlock with smart moto 'testpoint' HI strange problem here, i have done this phone over a dozen time same way way using smart moto via testpoint, but this one is just strange. It said 'phone unlocked' but refuses to power up, then i tried to search for phone and i see phone is in flash mode (which is strange, since i removed testpoint). Then i downloaded 'super flash' (pc flash .SHX) and uploaded to phone, i got 'error writting flash' but phone came up and worked for a while, i even used a SIM and all went on fine, but after i powered off phone and tried to power on about an hour later, it just didnt come on, so i repeated procedure tiwice and it came on and off again. Now i tried full SMF flash and still phone remained dead, i repeated former prcedure and no +ve result, not even earllier results, now phone remains in PARMANENT FLASH MODE. P.S. Battery fully charged. S.O.S PLSSSS.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V3 dead when unlock with smart-moto v1.23	llcoolr	Motorola P2k	7	08-06-2006 20:40
L7 dead after unlock with smart moto	mmanduri	Smart-Clip	13	07-27-2006 08:56
L6 Dead after Unlocking with Smart Moto " PHONE CODE SIG ERROR "	Aamir_Zia	Smart-Clip	53	06-13-2006 19:27
C350 dead after flashing with Smart Moto	cyrano	Motorola P2k	0	10-17-2005 22:00
V3 phone is dead after flashing with smart moto	parinjani	Smart-Clip	6	09-07-2005 16:01

07-24-2006, 23:53	#2 (permalink)
dexter2 Freak Poster Join Date: Sep 2003 Location: nigeria Age: 46 Posts: 187 Member: 38959 Status: Offline Thanks Meter: 0	hmmm....... four days and nobody got an answer for this one! still waiting though.

07-25-2006, 05:26	#3 (permalink)
[Rod] No Life Poster Join Date: Jun 2003 Location: somewhere Age: 40 Posts: 2,318 Member: 31028 Status: Offline Thanks Meter: 56	phone blinks when u try to turn on?

07-25-2006, 05:50	#4 (permalink)
dest No Life Poster Join Date: Jun 2004 Location: USA Age: 39 Posts: 1,142 Member: 67927 Status: Offline Thanks Meter: 108	does it say s blank neptune or s flash neptune ?

07-28-2006, 12:28	#5 (permalink)
dexter2 Freak Poster Join Date: Sep 2003 Location: nigeria Age: 46 Posts: 187 Member: 38959 Status: Offline Thanks Meter: 0	Phone doesnt blink, and when i try 'search' o smart moto, i get 's blank neptune,..' 'switching to flash mode.......ok'. Even without testpoint now. and remains dead. Now when i try to flash with SMF flash, it says 'incomplete chip identification.......'

07-28-2006, 17:17	#7 (permalink)
dest No Life Poster Join Date: Jun 2004 Location: USA Age: 39 Posts: 1,142 Member: 67927 Status: Offline Thanks Meter: 108	cannot be done. S blank because that you need to check tp becuase it my still be connected...or that the flash chip is damaged. Try hot air on it and do repair pds to see if that works!

07-28-2006, 17:44	#8 (permalink)
kidchaos Freak Poster Join Date: Jun 2006 Location: POLAND (Poznań) Posts: 177 Member: 287042 Status: Offline Thanks Meter: 4	If that won't help... than You have great possibility that the chip is damaged... Do unlock jobs one more time with extremly care!

07-29-2006, 10:48	#9 (permalink)
market_3b2002 Freak Poster Join Date: Oct 2004 Location: Free World Age: 59 Posts: 465 Member: 89177 Status: Offline Thanks Meter: 5	Try to flash it with RSD light 2.7 or 2.8 with the shx flash files more easy and quick then smart clip and your phone be a life again All the bests

07-31-2006, 11:33	#10 (permalink)
dexter2 Freak Poster Join Date: Sep 2003 Location: nigeria Age: 46 Posts: 187 Member: 38959 Status: Offline Thanks Meter: 0	thanx guyz for reply, but customer left with dead phone, wasnt patient enough.