l7 testpoint - GSM-Forum

emso · 03-31-2006, 17:36

i need testpoint for l7 i found one but i have to unsolder the whole rf shield and thats dangerous the picture i found the rf shield is still on the board so if there is any other solution i would like to know also i found out on smart clip forum that there is l7 (ver 1) and l7 (ver2) whats the diference between the two of them an if someone could give the two pictures would be very kind of him

midou01 · 03-31-2006, 17:40

http://www.yasikgsm.narod.ru/test_po..._tp/L7/L7.html
you will find the 2 version of TP look at the 2 pics and you will understand the differences, i advice you to cut the shield with a scalpel at TP location only or try to remove it slowly from there. Don't use hotair it is really dangerous

emso · 03-31-2006, 21:44

thaNKS A LOT I DID IT WITH CUTING THE FRAME WITH SCISSORS FOR METAL JUST OVER THE TEST POINT

03-31-2006, 17:36	#1 (permalink)
emso Freak Poster Join Date: Nov 2002 Location: neverland Age: 45 Posts: 391 Member: 18165 Status: Offline Thanks Meter: 12	l7 testpoint i need testpoint for l7 i found one but i have to unsolder the whole rf shield and thats dangerous the picture i found the rf shield is still on the board so if there is any other solution i would like to know also i found out on smart clip forum that there is l7 (ver 1) and l7 (ver2) whats the diference between the two of them an if someone could give the two pictures would be very kind of him

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
l7 testpoint, where is it?!	.:bono:.	Smart-Clip	43	01-22-2008 15:45
L7 testpoint and schematic	Hamou	Smart-Clip	2	05-18-2006 23:23
l7 testpoint new	emso	Motorola P2K (USB-Smart)	2	04-02-2006 13:55
Motorola L7 Testpoint. how can you tell if vision 1 or 2	pearsonjohnboy	Smart-Clip	6	03-23-2006 06:35
Motorola L7 Testpoint Not there	ExTrEmE99	Smart-Clip	3	02-15-2006 03:07

03-31-2006, 17:40	#2 (permalink)
midou01 No Life Poster Join Date: Oct 2003 Location: Tunisia Age: 43 Posts: 2,158 Member: 40632 Status: Offline Sonork: 98231 Thanks Meter: 1,658	http://www.yasikgsm.narod.ru/test_po..._tp/L7/L7.html you will find the 2 version of TP look at the 2 pics and you will understand the differences, i advice you to cut the shield with a scalpel at TP location only or try to remove it slowly from there. Don't use hotair it is really dangerous

03-31-2006, 21:44	#3 (permalink)
emso Freak Poster Join Date: Nov 2002 Location: neverland Age: 45 Posts: 391 Member: 18165 Status: Offline Thanks Meter: 12	thaNKS A LOT I DID IT WITH CUTING THE FRAME WITH SCISSORS FOR METAL JUST OVER THE TEST POINT