Test point steps. are they important?? - GSM-Forum

cipriti · 06-23-2006, 08:05

are the steps important?

1.conect usb cable
2.make test point
3.connect batery

or i can make them in a different order? pls help

smihnea · 06-23-2006, 09:29

you are very wrong!
first conect the testpoint then do other thing(conect cable or put the batery)

cipriti · 06-23-2006, 13:12

ok smihnea thx for the info

NiceLys · 06-23-2006, 14:36

like this works also :
1.conect usb cable to phone
2.make test point
3.connect batery

Quote:

Originally Posted by cipriti

are the steps important?

1.conect usb cable
2.make test point
3.connect batery

or i can make them in a different order? pls help

GSMsurgeon · 06-23-2006, 14:48

Quote:

Originally Posted by NiceLys

like this works also :
1.conect usb cable to phone
2.make test point
3.connect batery

Iam allways using like this... np at all
4 go to device manager/usb port.. then look ditection

cipriti · 06-23-2006, 15:51

and after i connect the batey should i remove the test point or leave it until i click on "do selected job" in p2k easy v3.9

allaboutgsm · 06-25-2006, 23:25

Can anyone tell me where to get a manual how to do Testpoint? I've unlocked a lot of phones but never used testpoint! Do you need a special cable?

smihnea · 06-27-2006, 08:47

cable is the same as that whit no testpoint but you have to follow the steps of conection whith pc

vermsky · 06-28-2006, 22:42

After connecting testpoint and battery you have to detect the phone first as S blank something. After you detect the phone you can go ahead and remove testpoint but not battery until you finish.

xlxMARKxlx · 06-29-2006, 16:54

can you use a normal pin for test point?

JosephB73 · 06-30-2006, 00:57

Quote:

Originally Posted by xlxMARKxlx

can you use a normal pin for test point?

Yes you can, but remember to tape the end of it so you are not touching the pin direct.

sepia · 06-30-2006, 01:11

@Vermsky
When you put battery (or any other source ) with test point connected, phone goes in boot mode, you detect it or not is other thing.
However, I advise every newbie to use power supply instead of battery.
Good luck.

vermsky · 07-12-2006, 19:57

Quote:

Originally Posted by sepia

@Vermsky
When you put battery (or any other source ) with test point connected, phone goes in boot mode, you detect it or not is other thing.
However, I advise every newbie to use power supply instead of battery.
Good luck.

@ sepia

And where could we get a power supply? And how do you attach it? Power supply would be better so that I would get my hand free to click the mouse

I've always used t720 battery for most phones though.

ebu mohammed-emin · 07-13-2006, 00:19

take this for hand free MouseClick v2[1].0 eng.zip

vermsky · 07-18-2006, 20:06

Quote:

Originally Posted by ebu mohammed-em

take this for hand free Attachment 67055

@ebu

Thanks dude! This is a nice little tool

06-23-2006, 08:05	#1 (permalink)
cipriti Insane Poster Join Date: Jun 2006 Location: Romania Posts: 68 Member: 297989 Status: Offline Thanks Meter: 2	Test point steps. are they important?? are the steps important? 1.conect usb cable 2.make test point 3.connect batery or i can make them in a different order? pls help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
can i unlock z-6 without test point.	saniamirza	MSS Box II	1	03-29-2010 21:06
how can i ulock my501c i have test point adapter can sombody write me step to step	Moniek	Sagem Hardware Repair Area	0	01-03-2007 21:58
>>>>> step by step for test-point solutation <<<<<	jignesh_1000	SonyEricsson (USB-Smart)	2	02-16-2006 14:12
Test point pictures are in support area.	GSMtricks	Multi-Box	8	11-21-2005 08:40

06-23-2006, 09:29	#2 (permalink)
smihnea Major Poster Join Date: Nov 2005 Posts: 43 Member: 198251 Status: Offline Thanks Meter: 4	you are very wrong! first conect the testpoint then do other thing(conect cable or put the batery)

06-23-2006, 13:12	#3 (permalink)
cipriti Insane Poster Join Date: Jun 2006 Location: Romania Posts: 68 Member: 297989 Status: Offline Thanks Meter: 2	ok smihnea thx for the info

06-23-2006, 15:51	#6 (permalink)
cipriti Insane Poster Join Date: Jun 2006 Location: Romania Posts: 68 Member: 297989 Status: Offline Thanks Meter: 2	and after i connect the batey should i remove the test point or leave it until i click on "do selected job" in p2k easy v3.9

06-25-2006, 23:25	#7 (permalink)
allaboutgsm Junior Member Join Date: Jun 2006 Posts: 4 Member: 290047 Status: Offline Thanks Meter: 0	Can anyone tell me where to get a manual how to do Testpoint? I've unlocked a lot of phones but never used testpoint! Do you need a special cable?

06-27-2006, 08:47	#8 (permalink)
smihnea Major Poster Join Date: Nov 2005 Posts: 43 Member: 198251 Status: Offline Thanks Meter: 4	cable is the same as that whit no testpoint but you have to follow the steps of conection whith pc

06-28-2006, 22:42	#9 (permalink)
vermsky Freak Poster Join Date: Dec 2005 Location: USA Age: 47 Posts: 317 Member: 206402 Status: Offline Thanks Meter: 22	After connecting testpoint and battery you have to detect the phone first as S blank something. After you detect the phone you can go ahead and remove testpoint but not battery until you finish.

06-29-2006, 16:54	#10 (permalink)
xlxMARKxlx Junior Member Join Date: Jun 2006 Posts: 10 Member: 298111 Status: Offline Thanks Meter: 0	can you use a normal pin for test point?

06-30-2006, 01:11	#12 (permalink)
sepia Freak Poster Join Date: Jun 2004 Location: Retired Unlocker in DZ Posts: 365 Member: 69987 Status: Offline Thanks Meter: 10	@Vermsky When you put battery (or any other source ) with test point connected, phone goes in boot mode, you detect it or not is other thing. However, I advise every newbie to use power supply instead of battery. Good luck.

07-13-2006, 00:19	#14 (permalink)
ebu mohammed-emin No Life Poster Join Date: Apr 2006 Location: The Arrivals Posts: 1,437 Member: 263993 Status: Offline Sonork: 100.1612432 Thanks Meter: 173	take this for hand free MouseClick v2[1].0 eng.zip