Unlocking a L2 - GSM-Forum

eddyis20 · 04-15-2007, 03:00

Im new to think unlocking world and need a bit of help..

I have been tryin to unlock this L2 for like 4hrs now with no sucuess.
I keep gettin a testpoint error.

I think my problem is I don't know when to disconnect the testpoint wire. I was reading and it says to disconnect after you hear the computer sync up with the phone.

I try that but once it goes into bootload mode it says use testpoint..

Help!

MATRIX.REAL · 04-15-2007, 03:08

ok

FOLLOW THIS STEPs

1-do TEST POINT (connect TEST POINT to GND)
2-put batterie
3-put cable (and wait for 5-8 secondes )
4-do unlock and when soft say "disconnect TP" then disconnect TP from GND and click on ok ..

it will unlock it in less then 5 secondes ... not difficult ...

jawad8305 · 04-15-2007, 03:22

After connecting the wire between the point and the gnd(the metalique protection), It's better to get the wire out and assemble the phone, then you can put the batterie easyer and disconnect the TP (cut the wire) when the soft says that.

04-15-2007, 03:00	#1 (permalink)
eddyis20 Junior Member Join Date: Apr 2007 Posts: 1 Member: 488848 Status: Offline Thanks Meter: 0	Unlocking a L2 Im new to think unlocking world and need a bit of help.. I have been tryin to unlock this L2 for like 4hrs now with no sucuess. I keep gettin a testpoint error. I think my problem is I don't know when to disconnect the testpoint wire. I was reading and it says to disconnect after you hear the computer sync up with the phone. I try that but once it goes into bootload mode it says use testpoint.. Help!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem After Successfully Unlocking Motorla L2	imran_qasim	Smart-Clip	14	06-16-2007 09:41
UNLOCKING Motorola L2	TazB	Phone Unlocking Codes & Maps	0	02-14-2007 22:00
Unlocking the L2	dbuttare	Motorola P2k	2	08-22-2006 05:11
How to unlock Motorola L2 ?	drnele	Motorola P2k	4	05-16-2006 06:21
Unlock mot L2	adrianw23	Smart-Clip	3	04-16-2006 18:23

04-15-2007, 03:08	#2 (permalink)
MATRIX.REAL No Life Poster Join Date: Nov 2005 Location: MATRIX.REAL Posts: 1,511 Member: 202333 Status: Offline Thanks Meter: 178	ok FOLLOW THIS STEPs 1-do TEST POINT (connect TEST POINT to GND) 2-put batterie 3-put cable (and wait for 5-8 secondes ) 4-do unlock and when soft say "disconnect TP" then disconnect TP from GND and click on ok .. it will unlock it in less then 5 secondes ... not difficult ...

04-15-2007, 03:22	#3 (permalink)
jawad8305 No Life Poster Join Date: Nov 2005 Location: Morocco-Khenifra Posts: 3,198 Member: 198621 Status: Offline Sonork: 100.1591649 Thanks Meter: 1,083	After connecting the wire between the point and the gnd(the metalique protection), It's better to get the wire out and assemble the phone, then you can put the batterie easyer and disconnect the TP (cut the wire) when the soft says that.