V3 bootloader 8.26 Unlock Solution?? - Page 3 - GSM-Forum

P1C1 · 10-22-2005, 21:11

It does not work, it flashes the whole phone but the original bootloader remains(8.26). The only way to do it is through smartclip w smf file using test point for now! tried it!!

piracik · 10-23-2005, 11:32

maybe smart clip will do

Quote:

Unlock procedure for V3 (RAZR) Motorola phone with testpoint (boot version 8.26)Disassemble the phone.
Connect your phone with USB cable to PC via Smart-Clip.
Connect testpoint as it show on a picture.
Connect fully charged phone battery.
Launch SmartMoto, select "Smart-Clip USB port" in connection window and press "Search", "S Blank Neptune LTE" should be detected.
Disconnect testpoint.
Flash it with R374_G_0E.40.9CR_lpXXX_full_flash.smf file. "Overwrite boot area" option must be marked.
Turn the handset on and unlock it with Smart-Clip, simply by pressing UNLOCK button.
WARNING
Be aware, that during unlocking procedure via testpoint, all signals go directly to processor. So any incorrectness in connection of testpoin could seriously damage the handset.
So please follow all instructions very carefully!

mutualmobile · 10-24-2005, 21:45

when i connected the testpoint with the GND, the phone can't be turned on already, and how can SC read it? it must be somthing wrong with this testpoint, i had a friend who has the same problem, this testpoint is not the best solution.

Deltas · 10-25-2005, 13:37

Phone can not be detected after conected Testpoint to GND ! ( phone can not power and can not set to Flash mode ) ! i think have some thing wrong with this test point !

piracik · 10-25-2005, 15:29

u use new tp or old - some say that old is bad but some that its working

Salami1_1 · 10-25-2005, 18:26

Quote:

Originally Posted by legija

I think You have no idea what You talk about.
No, i cant boot 826, neither smart clip ir victor, who are more advanced then us.
But i can promisse you - as soon someone boot 826 directly (without TP which was my idea long time ago) i will copy it in 20 minutes

.

No I don't think in bits and bytes but I doubt you do.. but I do know my product..
we support 8.23 direct and 8.26 using TP..
And soon maybe you'll be copying us. Let's just see..

10-25-2005, 19:12

Quote:

Originally Posted by Salami1_1

No I don't think in bits and bytes but I doubt you do.. but I do know my product..
we support 8.23 direct and 8.26 using TP..
And soon maybe you'll be copying us. Let's just see..

You're funny guy

Now You say you support 826 boot via TP, and few lines above you say you can do it directly ?

Code:

Originally Posted by Salami1_1
  @legija.. 8.26 is supported.. 
do you already support that boot?

Yes, Unimoto can unlock 826 boot via TP, even dont need any updates.
Why i didnt blablabled about this solution, is because this is not solution for remote market. All normal and sane unlockers have either Smart Clip or Victor, and they use Unimoto only because its fastest on some models.

Why You need to lie on Your site is another thing, anyway. "First in the world"

LOL . . .
I will cut this discussion at this point, since You're to ignorrant in motorola field, sell "your" new product as You were selling mine, and dont spread lies here, on your site you can do whatever you want, but here not buddy.

Salami1_1 · 10-25-2005, 21:34

Quote:

Originally Posted by legija

You're funny guy

Now You say you support 826 boot via TP, and few lines above you say you can do it directly ?

Code:

Originally Posted by Salami1_1
  @legija.. 8.26 is supported.. 
do you already support that boot?

Can you read? I did not say 8.26 is direct in that txt.. I know I implied it, my bad.. and I don't lie on my site.. all is very clear there, should I quote?

====
V3 8.23 is supported for direct unlock and boot 8.26 needs to be done using testpoint.
The testpoint pictures are available in the download section.

====

I don't see Smartclip / Victor as competitors they target different people as I do. I think smartclip is a good product, and for people who unlock lot of moto phone I encourage to buy smartclip.. but for people who just unlock very sporadic .. well use ours

Quote:

Originally Posted by legija

Yes, Unimoto can unlock 826 boot via TP,
.

I did not know that.. well maybe you had it first.. you did not announce it and I choose to annouce it, at that point as first

but ok. Let's look at future and stop babling about what happend

no hard feelings as ever

juan_carlos · 10-26-2005, 15:16

i flash my v3 version 42.07RA and my lcd gone please help me, the phone turn on but i cant see anything

jjrock · 10-28-2005, 02:07

Have You Tried The Trash Can????jajajajjajajajjajaja

jjrock · 10-28-2005, 22:47

I,m sorry man, Have you tried flashing with full flash? Or flash adn flex. That worked for me once. Had the same problem.

zulea · 10-28-2005, 23:55

Legija, you quoted wrong Salami's post.

Here is proof of his BIG LIES.
Posted few messages before in this thread too, and this thread have title V3 bootloader 8.26 Unlock Solution??:

Quote:

Originally Posted by Salami1_1

www.drmoto.net
Newest boot loader supported for direct unlock!

As ANYBODY can understand, you (Salami - "mincami-ai salamul") said DIRECT UNLOCK and this for sure not means USING TP

Now did you get the point, Mr. Salami - "mincami-ai salamul"?

Best regards,
Zulea

vrem · 10-29-2005, 00:57

@ Legija here below there is online loggers section and u can compare posts, would be better that you dedicates time to follow your many unhappy customers , while me seems that the drmoto's customers are satisfied, no bad post about he's service i found.

freak_tmb · 10-29-2005, 16:10

Quote:

Originally Posted by juan_carlos

i flash my v3 version 42.07RA and my lcd gone please help me, the phone turn on but i cant see anything

have you link for this flash file ?
i need russian LP for this version

mrfixit · 10-30-2005, 01:58

i flash my v3 and now also big screen blank small one is fine and everything else too any ideas?

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Bluetooth Problem After Unlock V3 Bootloader 8.26	Mounir	Smart-Clip	1	07-05-2006 08:41
v3 bootloader 8.26	mory2	Motorola P2k	4	06-05-2006 16:02
v3 version 8.26 unlock problem	ruvan	Smart-Clip	9	05-08-2006 15:35
Help step bij step V3 bootloader 8.26	Mounir	Smart-Clip	4	02-21-2006 00:03
bootloader 8.26 and smart unlocker	cellularcity	Smart-Unlocker	26	01-21-2006 17:22

10-22-2005, 21:11	#31 (permalink)
P1C1 Freak Poster Join Date: Sep 2005 Posts: 101 Member: 184630 Status: Offline Thanks Meter: 0	It does not work, it flashes the whole phone but the original bootloader remains(8.26). The only way to do it is through smartclip w smf file using test point for now! tried it!!

10-24-2005, 21:45	#33 (permalink)
mutualmobile Freak Poster Join Date: May 2005 Location: New Zealand Posts: 175 Member: 146818 Status: Offline Thanks Meter: 7	when i connected the testpoint with the GND, the phone can't be turned on already, and how can SC read it? it must be somthing wrong with this testpoint, i had a friend who has the same problem, this testpoint is not the best solution.

10-25-2005, 13:37	#34 (permalink)
Deltas No Life Poster Join Date: Jun 2002 Location: Vietnam Age: 57 Posts: 559 Member: 13356 Status: Offline Thanks Meter: 2	Phone can not be detected after conected Testpoint to GND ! ( phone can not power and can not set to Flash mode ) ! i think have some thing wrong with this test point !

10-25-2005, 15:29	#35 (permalink)
piracik No Life Poster Join Date: Apr 2005 Location: POLSKA Biesy... Age: 40 Posts: 1,246 Member: 133762 Status: Offline Thanks Meter: 242	u use new tp or old - some say that old is bad but some that its working

10-26-2005, 15:16	#39 (permalink)
juan_carlos Junior Member Join Date: Oct 2005 Age: 48 Posts: 21 Member: 194354 Status: Offline Thanks Meter: 0	i flash my v3 version 42.07RA and my lcd gone please help me, the phone turn on but i cant see anything

10-28-2005, 02:07	#40 (permalink)
jjrock Insane Poster Join Date: Jul 2005 Age: 55 Posts: 81 Member: 166086 Status: Offline Thanks Meter: 9	Have You Tried The Trash Can????jajajajjajajajjajaja

10-28-2005, 22:47	#41 (permalink)
jjrock Insane Poster Join Date: Jul 2005 Age: 55 Posts: 81 Member: 166086 Status: Offline Thanks Meter: 9	I,m sorry man, Have you tried flashing with full flash? Or flash adn flex. That worked for me once. Had the same problem.

10-29-2005, 00:57	#43 (permalink)
vrem Freak Poster Join Date: Dec 2003 Location: italy Posts: 239 Member: 45373 Status: Offline Thanks Meter: 3	@ Legija here below there is online loggers section and u can compare posts, would be better that you dedicates time to follow your many unhappy customers , while me seems that the drmoto's customers are satisfied, no bad post about he's service i found.

10-30-2005, 01:58	#45 (permalink)
mrfixit No Life Poster Join Date: Apr 2004 Location: MOON Posts: 5,858 Member: 60899 Status: Offline Thanks Meter: 792	i flash my v3 and now also big screen blank small one is fine and everything else too any ideas?